• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.545-552
• /
• 2017

Aeolian dunes are typical sand dunes which are maintained and developed by interactions of earth surface, wind and vegetation. Developing a model which can predict the changing phenomena of these sand dunes is vital in enhancing the efficiency of understanding and management of terrains such as land degradation. In the existing models, however, there is lack of studies on the long - term behaviors of the sand dunes and application to actual topography. Therefore, this study applied the wind-vegetation model considering vegetation to the actual topography and analyzed the applicability of the wind-vegetation model by analyzing the long-term behaviors and comparing them with actual data. Through analysis, study found out that use of wind-vegetation model and data from unmanned aerial vehicle is effective in analyzing the changes of actual dune topography. Except for the boundary, the error of about 1m was generated compared with the change of the actual dune topography.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.5
• /
• pp.441-448
• /
• 2011

Lately, digital restitution was became common using digital aerial photos. Therefore, we can obtain three-dimensional data. As a plotting-maker is checked by naked eye, plotting original data is very useful for making reliable three-dimensional data including contour and elevation point layers. In this study, we want to make precise and accurate digital elevation model using plotting original data. Contour and elevation point layers was extracted in digital map and break line was extracted in plotting original data. And then, compared both of results. For comparison, we selected slight slope and complex topography area like a residence area, mountain and agricultural land. We extracted break line deleting layer until obtaining ideal digital elevation model. As the results, We could extract contour, elevation points, eight road and two boundary layers using break lines. And We could obtain precise elevation model. Editing break lines, the distortion of digital elevation model could be minimized in the complex and sharp slope area.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.3
• /
• pp.60-75
• /
• 2004

The purpose of this research is to evaluate five types of eco-village planning in order to introduce a landscape unit concept and theory in Korea. Although they had different backgrounds and motives of eco-villages planning, their common goal is to always maintain ecological planning and design in their villages. As concrete methods of ecological planning, we suggest three fundamental planning theories. 1. The boundary of a plan unit should be a watershed. 2. The survey and analysis of village ecotopes should be done in that defined watershed. 3. These results should be applied in the site and lot planning of eco-villages. These 3 steps should be done in a process and relevantly. In the evaluation of the five eco-village planning types, we found three results. 1. On a viewpoint of watershed, most planners recognized a watershed in survey and planning stages unconsciously. But they did not mention watersheds concretely and did not use this concept in the planning stage. 2. They did not define the concept of ecotope, but most planners recognized land-uses and vegetations of villages and vicinities as ecotopes. Also these could be proper ecotopes, but they did not use these compartment of ecotopes in the planning of ecosystem structure in villages. In addition, they did not deeply survey and analyze the ecotopes of villages and its vicinity. 3. On the viewpoint of sites and lots planning, they did not relevantly use the characteristics of watersheds and ecotopes in sites and lots planning. Therefore, they failed to implement the indigenous lots and subdivisions plan. In the size of lots and sites, they did not seriously consider the carrying capacity of ecosystem. We hope that our suggestion about the establishment of eco-villages planning is a fundamental theoretical framework of ecological planning in future eco-village planning.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.10
• /
• pp.1025-1029
• /
• 2005

A simple analysis of atmospheric sulfur dioxide($SO_2$) pollution in industrial region was investigated using badge type passive samplers. It were set up in 76 locations and the $SO_2$ distribution evaluated along the boundary of land use type. It changed considerably both monthly and seasonally. Soil samples were also collected in 120 locations to investigate influence of sulfur dioxide pollution on soil and heavy metal distribution in the study area, where the sulfur dioxide pollutants from industrial area could affect the soil environment of near residential and green areas. The relationship between the $SO_2$ concentrations in the atmosphere and heavy metal(Cu, Pb) concentrations in the soil were analyzed, by using the correlation coefficient values and the results were 0.17 and 0.08 in industrial area. And this study indicated that the atmospheric pollution in industrial region affect the level of the soil pollution adjacent to the residential and green area. The study result may be used to define correlativity for establishing an exposure index. It will subsequently be used for a more precise assessment measuring the exposure of plants and inhabitants, for the purposes of a study en effects on health.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.1
• /
• pp.15-22
• /
• 2009

This study reports the serial use of a 3-D hydrodynamic model, EFDC-Hydro and a dynamic water quality model WASP7.2 that are maintained by USEPA. The 48 km section of the Geum River downstream between Daechung Dam and Gongju was selected as a sample study site. Topographical information was used to accurately represent morphology of the study site and boundary conditions were derived from governmental databases including WAMIS by Ministry of Land and Ocean and WEIS by Ministry of Environment. EFDC-Hydro was successfully calibrated for observed water level and WASP was calibrated using monthly observed water quality data obtained from the above sources. It was found that the current water quality target of BOD for the Geum River-H point could not be met on monthly basis though every other tributary of the area would meet its own water quality target as assigned in Korean TMDL. This study proposed the new target BOD water quality for the Gabcheon and Mihocheon as 4.3 and 3.6 mg/l, respectively so that the Geum River-H point can meet the target. When Sejong City is constructed, it is estimated that effluent discharge limit of BOD must be less than 4.5 mg/l to meet water quality of the point. This study shows that it is possible to carry out more precise modeling considering both water movement and water kinetics by using EFDC and WASP simultaneously.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1934-1938
• /
• 2008

In this study, the landuse pattern at the Gab river is analyzed using time-series aerial images. This study area is divided by two zones like as inland and floodplain. To begin with, in inland, the landuse area of items such as residential, road, industrial, public facilities is increased by following the urbanization. On the other hand, the area of the other items such as agricultural, forest and river is decreased. Also, the inclination of those two groups is reversed around 1988. Form the results, it is clarified that the Gab river is urbanized around 1988. In floodplain, the area of river is decreased as time goes by. This result means that the area of landuse factors such as level-upped riverside land, bridge, head work is increased conversely. Also, the proportion of the water to the river considering the hydrologic factor like rainfall is increased as time goes by. Overall, it is concluded that aerial image can be applied to get a landuse information that is needed in river management and planning.

• Journal of Environmental Science International
• /
• v.18 no.9
• /
• pp.1027-1033
• /
• 2009

For the assesment of pollutant loads, a monitoring has been conducted to identify hydrologic conditions and water quality of the Oenam watershed in Juam Lake, and the SWAT model integrated with GIS was applied to the watershed and evaluated for its applicability through calibration and verification using observed data. For the model application, digital maps were constructed for watershed boundary, land-use, soil series, digital elevation, and topographic input data of the Oenam watershed using Arcview. The observed runoff was 832.8 mm while the simulated runoff was 842.8 mm in 2003. The model results showed that the simulated runoff was in a good agreement with the observed data and indicated reasonable applicability of the model. In terms of nutrient load, the simulation results of T-N, T-P showed a similar trend to observed values. The observed T-N load was 10.8 kg/ha and the simulated T-N load was 7.6 kg/ha while the observed T-P load was 0.21 kg/ha and the simulated T-P load was 0.18 kg/ha. In general, SWAT model predicted observed runoff and loads of T-N and T-P after calibration with observed data in acceptable range. Overall, SWAT model was satisfactory in estimation of nutrient pollutant loads of the rural watershed.

• Spatial Information Research
• /
• v.17 no.2
• /
• pp.231-241
• /
• 2009

Recently, The importance of a quality control for implementing 3D geospatial database has being emphasized to build a 21st century knowledge society and an ubiquitous land. The improvement of 3D geospatial database quality control through establishing an integrated quality control makes data suppliers update data efficiently and users get high quality data. The purpose of this study was to derive the improvement plan of 3D geospatial database quality control through the analyses of the existing 3D geospatial database quality control and case studies. The results of this study are as follows. Firstly, we defined the concept of 3D geospatial database quality control. Secondly, we set the boundary, factors and process of 3D geospatial database quality control through classifying it in detail. Lastly, we drew improvement contents such as the quality control checklist by implementation process according to the improvement plan of 3D geospatial database implementation.

• Spatial Information Research
• /
• v.5 no.1
• /
• pp.43-59
• /
• 1997

There are currently more than tens of thematic maps in Korea. Among them, there are some thematic maps which are used by one organization only by which was made, and there are common thematic maps which are used by several organizations. In this study, among many kinds of common thematic maps which are currently used, the common thematic maps which will be digitized for parts of NGIS project were chosen and the priority of project was established. After selecting five maps from the common thematic maps classified as the first ranking, current land use map, parcel-address map, administrative boundary map, urban planning map and road map, the area of CheJoo Island was digitized as a pilot project. Through the pilot project of CheJoo Island, the level of application was verified, and the method was presented in order to reduce the trial and error in the process of this production after analyzing the matter from the pilot project. The direction for digitizing common thematic maps was presented based on the result of the pilot project, in addition to, the detail plan was established after deciding the number of people needed, the amount of money spent, and the period needed for making digital maps nationwide.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.5
• /
• pp.333-343
• /
• 2010

In Mokpo coastal zone, the characteristics showing ebb-dominant tidal flow was confirmed by analysis of observed tide and tidal currents, Physical factors occurring ebb-dominant flow were reviewed. Influence of critical depth for drying, bottom shear stress, coastal reclamation, tidal amplitude, nonlinear tide, and eddy viscosity on the change of ebb-dominant flow was investigated by applying a two-dimensional circulation model. The simulation results for a variety of conditions showed that eddy viscosity and critical depth for drying does little or no impact on the generation of asymmetric flow. Strong bottom friction stress makes ebb-dominant flow clearly. Change of tidal flat into land swells ebb- dominant flow, and change of tidal flat into sea disappears ebb-dominant flow. Nonlinear tides play a decisive role in the generation of asymmetrical tidal flow. Non-linear tides should be included in the open boundary conditions of hydrodynamic modeling in the Mokpo coastal zone.