• Journal of the Korean Geophysical Society
• /
• v.9 no.4
• /
• pp.321-331
• /
• 2006

Recently, runoff characteristics of urban area are changing because of the increase of impervious area by rapidly increasing of population and industrialization, urbanization. It needs to extract the accurate topologic and hydrologic parameters of watershed in order to manage water resource efficiently. Thus, this study developed more precise input data and more improved parameter estimating procedures using GIS(Geographic Information System) and GA(Genetic Algorithm). For these purposes, XP-SWMM (EXPert-Storm Water Management Model) was used to simulate the urban runoff. The model was applied to An-Yang stream basin that is a typical Korean urban stream basin with several tributaries. The rules for parameter estimation were composed and applied based on quantity parameters that are investigated through the sensitivity analysis. GA algorithm is composed of these rules and facts. The conditions of urban flows are simulated using the rainfall-runoff data of the study area. The data of area, slope, width of each subcatchment and length, slope of each stream reach were acquired from topographic maps, and imperviousness rate, land use types, infiltration capacities of each subcatchment from land use maps, soil maps using GIS. Also we gave the management scheme of urbanization runoff using XP-SWMM. The parameters are estimated by GA from sensitivity analysis which is performed to analyze the runoff parameters.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.863-869
• /
• 2017

In this study, the information breakdown structure of water purification plant has been made by classifying various the water purification methods and facilities. this can be utilized as a code system of computer for integrating information and analyzing quantitative of environmental impact and calculating cost of maintenance and energy consumption which was used during life cycle of water purification plant. Since the construction information contains many heterogeneous information, it is very important to have a code system for managing the integrated information. In addition, since water purification plant facilities are mainly composed of installation of facilities including many processes, a more detailed classification code is required. Therefore, in this study, the water purification breakdown structure which is not yet attempted in Korea was constructed by using facet classification system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.5
• /
• pp.147-158
• /
• 2008

Recently, Intelligent Transportation System (ITS) has been actively developed and built since the Transportation System Efficiency Promotion Act was enacted. However, since mutual connection among transportation information systems was not considered, the integration of transportation information services did not occur. Accordingly, the Ministry of Land Transport and Maritime Affairs established and announced the technical standard on ITS. In this study, the conformance testing of the transportation information and communication system interface standard on data exchange between the Transportation Information Center and terminals was researched The test items were categorized as data request tests and data providing tests by analyzing the communication procedures specified in the standard. A detail testing scenario was created for each item. The test assessment was established based on the conformance of data exchange procedures and the accuracy of data packet messages. Under the established technical standard, the number of times that tests should be performed was thought set to 30 and the success rate was set to 95%. The purpose of this study is to help the ITS of Korea perform the integrated management of transportation information by researching methods for conformance testing on the technical standard on ITS.

• Journal of the Korean Regional Science Association
• /
• v.32 no.1
• /
• pp.105-122
• /
• 2016

Recently people are starting to pay attention to the vacant house. Vacant house across the country are expected to be a Million. Ministry of Land, Transport and Maritime Affairs has created a new legal provisions regarding maintenance to Vacant on the Construction Law. But Vacant house information systems in government are not available Other countries to clarify the role each entity to manage these Vacant and manages the Vacant. The national government has made the operating budget support program for the Vacant management. The local government has made legislation of self-government to create a DB for the Vacant management. A non-profit corporation is developing a program operated by the Vacant, and the Vacant intermediaries to consumers. Therefore, our country is also to expand the national budget for the Vacant administration, local governments should establish a comprehensive management system for managing and providing Vacant house research and DB.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.8
• /
• pp.1632-1639
• /
• 2004

The exist email program between Ship and Land has developed to reduce communication fee because of high satellite communication cost and low speed. Owing to this proper, the exist program has less flexibility and high speed. but to add or change functions is not easy. and it also have many difficulties for programmer to develop marine application because of delicate Satellite Radio communication. In this paper we design new protocol which consist of packet to give flexiblity and implement windows service program for programer to make marine applications easily like monitoring data, DB for Ship Management System, Planned Maintenance System.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.48 no.5
• /
• pp.29-38
• /
• 2006

Geographic Information System has extended to higher assessment of water resources. GIS linking with hydrological model becomes a trend in water resource assessment modeling. One of the most popular models is SWAT2000 which have effectiveness in multi-purpose processes for predicting the impact of land management practices on water, sediments and chemicals yields in large complex watershed with varying soils, land uses, and management conditions over long period of time. In this study, SWAT2000 model was applied to Gap stream watershed in Daejeon city where TMDL (Total Maximum Daily Load) Regulation would be implanted. The Gap Stream watershed was partitioned into 8 subbasins, however, only 3 out of 8 subbaisns were observed for having practical gauged data on the basis of streamflow from the year of 2002 to 2005. Gauged streamflow data of Indong, Boksu and Hoeduck stations were used for calibration and validation of the SWAT Streamflow simulation. Estimation Efficiency Analysis (COE), Regression Analysis ($R^{2}$), Relative Error (R.E.) were used for comparing observed streamflow data of the 3 subbasins on the daily and monthly basis with estimated streamflow data in order to fix optimized parameters for the best fitted results. COE value for the daily and monthly streamflow was ranged from 0.45 to 0.96. $R^{2}$ values for daily and monthly streamflow ranged from 0.51 to 0.97. R.E. values for total streamflow volume ranged from 3 % to 22.5 %. The accuracy of the model results shows that the SWAT2000 model can be applicable to Korean watersheds like the Gap Stream watershed that needs to be partitioned into a number of subbasins for TMDL regulation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.1
• /
• pp.1-7
• /
• 1997

In the digital mapping for data base contruction, the positional information is used as an important tool in LIS/GIS(Land Information System/Geographic Information System) that is used for a facility management, urban/cadastral management as well as in spatial analysis. In this paper, for an error analysis of X, Y coordinates data on digital map, test area was classified by topography, density, and slope. The coordinates on topographic map were assumed as true values and they were compared with the coordinates on digital map. A result of the numerical test show that a vector data of line type had more gross error than vector data of polygon type. And, SME(stanadrd mean error) of urban or intermountain area had small values compared to that of suburban area in topography analysis. The SME of dense and middle zone had small values compared to that of loose zone in density analysis. In another slope analysis. the SME of steep of gentle slope had small values compared to that of flatland.

• Spatial Information Research
• /
• v.23 no.6
• /
• pp.67-75
• /
• 2015

Today, because human settlements are concentrated into urban area, urban planning and management technique considering the complexity, diversity, and advanced situations of urban living space is being requested. Especially, to effectively respond to large and diverse climate change driven disaster, it is necessary to develop urban planning technique including land use, infrastructure planning based on disaster vulnerability analysis. However, because current urban climate change disaster vulnerability analysis system(UC-VAS) is using census output area as spatial analysis unit, it is difficult to utilize the analysis results for specific urban planning. Instead, this study applies the grid manner to two study areas. The analysis results show that it can generate more detailed results and it can be used for detailed zoning decision by comparing with areal photos. Furthermore, by describing the limitation of the grid manner and providing professional way to secure additional scientific character and objectivity of the future urban climate change disaster vulnerability analysis system, it is expected that this study contributes to the effectiveness of system management.

• Journal of Advanced Navigation Technology
• /
• v.19 no.5
• /
• pp.403-410
• /
• 2015

ADS-B can provide high accurate position information and faster update rate than Radar system and it is a technique that can supplement or replace the Radar. Recently ADS-B has been applied to the actual aircraft operation because to increase air transportation traffic and required to high accurate surveillance. In this study, we surveyed analysis of position deviation distribution analysis and received actual ADS-B trajectory data for conformed precise surveillance on the near airport area using ADS-B message. For that, we received the precision instrument approach ADS-B trajectory data using instrument landing system, and can analyse about target deviation distribution on the final approach segment about precision instrument approach. The result of analysis is mean distance of target deviation -0.04 m and standard deviation 6.71 m on between ADS-B target and extended runway centerline. Also that is to conformed the ADS-B message trajectory available to provide relatively exact surveillance information.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.2
• /
• pp.143-155
• /
• 2000

With the increasing needs for the integrated use of topographic and cadastral data in order to build an efficient geo-spatial information system. it is urgently necessary to research into its solution. The intention of this study is to detect error types of data and to propose adjustment methods for solving the problems caused by integrating topographic and cadastral data. For this purpose a primary integrated data model is created to link attribute data(land management system) and graphic data within cadastral information in the first step. In next, a secondary integrated data model based on the improved method is formed to coincide the graphic data of cadastral map with that of topographic map. At the first, because a numerous error types md sources caused by separate management of graphic and attribute data are easily checked, it is possible to suggest an improved method to correct these errors using the primary integrated data model. In addition, the accuracy in position and area with coordinate transformation method based on multi-block adjustment is more efficient than rubber-sheeting method. As a result, the secondary integrated data model could be built by harmonizing cadastral map with topographic map using the improved solution.