• 조명전기설비학회논문지
• /
• 제18권6호
• /
• pp.1-7
• /
• 2004

고압방전등을 점등하기 위해서는 고전압의 시동전압이 필요하게 되는데, 이러한 시동전압은 고압력의 나트륨램프에서도 필요하게 된다. 자기장은 전기 방전튜브에서 만들어지게 되며 증기 원자에 대한 전자충돌이 가속화되면서 2차 전자가 발생하고 전기 방전튜브에 전류가 급속도로 흐르게 되며, 나트륨램프의 제작회사마다. 서로 다른 램프의 수명 및 교환시점도 서로 다르다는 것을 본 논문의 연구과정에서 발견하게 되었다. 본 논문에서는 LabVIEW소프트웨어패키지를 사용 중인 나트륨램프의 교환시점의 알고리듬을 제안한다.

• 미생물학회지
• /
• 제47권2호
• /
• pp.103-109
• /
• 2011

Pectobacterium carotovorum subsp. carotovorum (PCC)는 세균성 무름병균으로 주로 감자, 양배추 등의 식물에서 질병을 일으킨다. 본 연구에서는 현장에서 신속하게 진단하기 위해 loop-mediated isothermal amplification법을 이용하여 1시간 내에 등온에서 검출 가능한 진단법을 개발하였으며, 이를 PCC-LAMP법이라 명명하였다. PCC의 lytic murein transglycolase 유전자를 특이적으로 증폭시키는 4개의 프라이머를 제작하였으며 최적 온도가 $61^{\circ}C$임을 확인하고 최적 조건을 확립하였다. 최적 조건을 바탕으로 4개의 프라이머가 $1{\times}10^3$ copies까지 검출하는 민감성을 확인할 수 있었다. 본 연구에서 개발된 PCC-LAMP법은 특이성 검사를 통해 PCC만이 특이적으로 검출됨을 확인하였으며, 이는 실제 시료에서도 적용 가능함을 확인하였다. PCC-LAMP법을 통하여 PCC를 신속하고 정확하게 검출함으로써 현장에서 유용하게 적용될 수 있을 것으로 사료된다.

• The Plant Pathology Journal
• /
• 제31권3호
• /
• pp.219-225
• /
• 2015

The primary step for efficient control of viral diseases is the development of simple, rapid, and sensitive virus detection. Reverse transcription loop-mediated isothermal amplification (RT-LAMP) has been used to detect viral RNA molecules because of its simplicity and high sensitivity for a number of viruses. RT-LAMP for the detection of Potato virus X (PVX) was developed and compared with conventional reverse transcription polymerase chain reaction (RT-PCR) to demonstrate its advantages over RT-PCR. RT-LAMP reactions were conducted with or without a set of loop primers since one out of six primers showed PVX specificity. Based on real-time monitoring, RT-LAMP detected PVX around 30 min, compared to 120 min for RT-PCR. By adding a fluorescent reagent during the reaction, the extra step of visualization by gel electrophoresis was not necessary. RT-LAMP was conducted using simple inexpensive instruments and a regular incubator to evaluate whether RNA could be amplified at a constant temperature instead of using an expensive thermal cycler. This study shows the potential of RT-LAMP for the diagnosis of viral diseases and PVX epidemiology because of its simplicity and rapidness compared to RT-PCR.

• Transactions on Electrical and Electronic Materials
• /
• 제15권4호
• /
• pp.201-206
• /
• 2014

LED lighting,considered to be a new growth industry, has attracted a great deal of attention due to its higher illumination and longer life time than existing light sources. In this study, high-efficiency and long-life LED fog lamps for automobiles were developed, which can substitute the existing 27 W halogen fog lamps for a used car market. For this purpose, the number of LED modules, the body, heat sink, and the output of the fog lamp were first optimized through a numerical analysis. Then, a 10 W-class LED fog lamp was prototyped based on the optimized numerical model, and the performance of the fog lamp was successfully verified through the experiments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.43-47
• /
• 1998

In this paper we present the method that improve alarm security system using the electronic circuits added the emergency lamp by our proposed Algorithms. In conventional method the emergency lamp of warning & alarm system was not executed perfectly its performance because of battery with short life. For improving this problem we, using Peripheral Interface Controller IC, designed the circuit added the emergency lamp for an warning & alarm system and for prevent from stopping the electric current, and compared our proposed method with conventional method. By designing the circuit to stop up over charge we can extend life of battery, use of a stoppage of electric current in emergency and according to the lightness around. Therefore we are very convenient and profitable in our life. In this future we will study the method to lower the cost of architecture for practical utilization.

• Industrial Engineering and Management Systems
• /
• 제3권1호
• /
• pp.59-62
• /
• 2004

The number of tunnel has fast increased with the rapid expansion of highway network. Tunnel should be designed to provide for drivers both safety and pleasant driving conditions. In this perspective, the design for tunnel lightning is very important in order to provide its safety, pleasantness, and cost-efficiency of maintenance, all of which should be considered and analyzed for a better tunnel lighting. This paper attempts to compare the low-pressure sodium lamp, which have usually been used for tunnel lighting, with the fluorescent lamp, which we consider as an alternative for the former. In an effort to determine the number of lamps to meet the required illuminance in the tunnel, this research employs a simulation technique which would allow us to conjecture, with the aid of basic model, the life cycle cost for illumination per each tunnel. This analysis is expected to provide a basic method and related information for tunnel development and design.

• 생명과학회지
• /
• 제24권4호
• /
• pp.428-436
• /
• 2014

Loop-mediated isothermal amplification (LAMP)법은 등온에서 DNA 주형을 변성시키지 않고 실시하기 때문에, autocycling 가닥 변위 DNA 합성에 의존한다. 그래서 고가의 PCR 장비를 필요로 하지 않고 등온 유지가 가능한 저가의 장비인 항온 수조, 오븐, 온장고 등에서 증폭이 가능하다. 본 연구진은 Streptococcus parauberis의 random primer중에서 5개를 선정하여, 신장도가 높은 2개의 primer를 이용하여 최적 반응온도 및 최적 반응시간, 최적 반응 조건들을 확립하였다. 그리고 기존의 PCR과 LAMP의 민감도의 비교 분석을 측정한 결과, LAMP의 높은 검출 한계를 확인할 수 있었다. 본 논문에서는 non-target DNA의 영향을 받지 않고 등온 조건 하에서 DNA를 증폭시킬 수 있는 LAMP법과 SYBR-green I를 이용하여 시각화시켰으며, 기존의 PCR과 비교 분석함으로써, S. parauberis에 대한 신속하고 정확한 진단법을 확립하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1717-1720
• /
• 2002

Electrodeless discharge lamps have been objects of interest and research for several decades, mainly because of their potential for extremely long life, high lamp efficacies and smaller than standard fluorescent lamps size. A series of measurements and observations concerning variables has yielded optical and electrical characteristics for electrodeless discharge lamp like incandescent lamp and circular lamp feature. Last experiment were carried out to determine the lamp temperature at several surface points during operation. Light output levels in excess over 60,000 cd/$m^2$ have been measured in electrodeless discharge lamp for a general of conditions. At lamp surface temperatures have been measured over $80^{\circ}C$, and starting current have been measured over ${\sim}A$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.296-299
• /
• 1987

The purpose of this paper is to increase the lamp efficacy by filling the optimal Nitrogen gas pressure in the outer enclosure of metal halide lamp. This study presents a new model of Langmuir in the outer enclosure of discharge lamp. In this paper, in the first place, the diameter of Langmuir sheath and the total gab loss were calculated. Secondly, the each gas loss was computed if the arbitrary gas pressure is filled, With the calculated data, flash over which affects the lamp efficacy, lamp life and color rendering was considered. In case of the established discharge lamp, the gab pressure has been filled by experience only roughly. The gas loss is converted into the radiation output. Therefore, the lamp efficacy is improved by reducing the gas loss.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.197-200
• /
• 2002

This paper reviews electrodeless lamp technology. The lamp has very long life time but very high cost compared to conventional lamps such as fluorescent lamp. For optimizing the overall system in performance and cost power supply as well as lamp is very important. First, the paper describes various electrodeless lamps and its market condition. Then, a lot of circuit technology for constructing the power supply is reviewed and circuit characteristics are discussed