• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.125-126
• /
• 2009

• 소음진동
• /
• 제11권3호
• /
• pp.416-421
• /
• 2001

The flexural vibration of laminated composite beams with an electro-rheological(ER) fluid has been investigated to design a structure with maximum possible damping capacity. The equations of motion are derived for flexural vibrations of symmetrical, mu1ti-layer laminated beams. The damping radio and modal damping of the first bending mode are calculated by means of iterative complex eigensolution method. Finite element method is used for the analysis of dynamic characteristics of the laminated composite beams with an ER fluid. For the validation of modeling methodology using viscoelastic theory the predicted dynamic properties are compared to the measured ones by author's previous work. They are in good agreement. This paper addresses a design strategy of laminated composite under flexural vibrations with an ER fluid.

• Journal of Mechanical Science and Technology
• /
• 제16권3호
• /
• pp.310-319
• /
• 2002

This paper deals with the analytical modeling, and the experimental verification of the strain rate self-sensing method using a hybrid adaptive filter for a cantilevered piezoelectric beam. The piezoelectric beam consists of two laminated lead zirconium titanates (PZT) on a metal shim. A mathematical model of the beam dynamics is derived by Hamilton's principle and the accuracy of the modeling is verified through the comparison with experimental results. For the strain rate estimation of the cantilevered piezoelectric beam, a self-sensing mechanism using a hybrid adaptive filter is considered. The discrete parts of this mechanism are realized by the DS1103 DSP board manufactured by dSPACE$\^$TM/. The efficacy of this method is investigated through the comparison of experimental results with the predictions from the derived analytical model.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.887-892
• /
• 2003

A modeling method for the modal analysis of a rotating composite beam is presented in this paper. Linear differential equations of motion are derived by using the assumed mode method. For the modeling, hybrid deformation variables are employed and approximated to derive the equations of motion Symmetrical laminated layers are considered for the composite beam. The effects of the dimensionless angular velocity, the hub radius and the fiber orientation angle parameter on the variations of modal characteristics are investigated.

• Journal of Mechanical Science and Technology
• /
• 제18권2호
• /
• pp.240-245
• /
• 2004

A modeling method for the modal analysis of a rotating composite cantilever beam is presented in this paper. Linear differential equations of motion are derived using the assumed mode method. For the modeling, hybrid deformation variables are employed and approximated to derive the equations of motion. Symmetrical laminated composite beams are considered to obtain the numerical results. The effects of the dimensionless angular velocity, the hub radius and the fiber orientation angle on the variations of modal characteristics are investigated.

• Smart Structures and Systems
• /
• 제12권5호
• /
• pp.501-521
• /
• 2013

This paper is concerned with static and dynamic shape control of a laminated Bernoulli-Euler beam hosting a uniformly distributed array of resistively interconnected piezoelectric patches. We present an analytical one-dimensional model for a laminated piezoelectric beam with material discontinuities within the framework of Bernoulli-Euler and extent the model by a network of resistors which are connected to several piezoelectric patch actuators. The voltage of only one piezoelectric patch is prescribed: we answer the question how to design the interconnected resistive electric network in order to annihilate lateral vibrations of a cantilever. As a practical example, a cantilever with eight patch actuators under the influence of a tip-force is studied. It is found that the deflection at eight arbitrary points along the beam axis may be controlled independently, if the local action of the piezoelectric patches is equal in magnitude, but opposite in sign, to the external load. This is achieved by the proper design of the resistive network and a suitable choice of the input voltage signal. The validity of our method is exact in the static case for a Bernoulli-Euler beam, but it also gives satisfactory results at higher frequencies and for transient excitations. As long as a certain non-dimensional parameter, involving the number of the piezoelectric patches, the sum of the resistances in the electric network and the excitation frequency, is small, the proposed shape control method is approximately fulfilled for dynamic load excitations. We evaluate the feasibility of the proposed shape control method with a more refined model, by comparing the results of our one-dimensional calculations based on the extended Bernoulli-Euler equations to three-dimensional electromechanically coupled finite element results in ANSYS 12.0. The results with the simple Bernoulli-Euler model agree well with the three-dimensional finite element results.

• 대한기계학회논문집
• /
• 제17권1호
• /
• pp.90-100
• /
• 1993

본 연구에서는 압전 감지기/작동기를 이용한 복합적층판의 진동제어해석을 위 하여 판요소를 사용한 능률적인 유한요소코드 개발에 있다. 운동방정식은 고전 적층 판이론과 Hamilton의 법칙을 이용하여 유도하며 압전방정식으로부터 전기적-기계적 연 계를 고려한 감지식과 작동식을 구한다.각식들은 유한요소 보간함수에 의하여 절점 변위에 대한 행렬방정식으로 변환된다. 요소마다 하나의 전기적 자유도를 가진 4-절 점 12-자유도 판요소를 사용하여 효율적인 계산을 가능하게 하였다. 압전 감지기/작 동기를 도입함에 있어 하나의 전극에 대해 압전 감지기/작동기는 하나의 감지/작동전 압을 갖는다. 각 요소에 전극번호를 부가함으로써 다양한 형상의 전극을 쉽게 모델 링하였으며 전극의 특성도 충분히 고려하였다. 전기적 하중에 의한 압전보의 변형과 변형에 대한 감지전압에 대한 계산을 수행하여 기존의 연구와 비교함으로써 본 프로그 램의 타당성을 확인하였다. 나아가 여러가지 전극형상에 대한 복합재료 평판의 시간 영역과 주파수영역에서 응답을 계산하였다.

• Smart Structures and Systems
• /
• 제7권5호
• /
• pp.417-432
• /
• 2011

The present paper is devoted to vibration canceling and shape control of piezoelastic slender beams. Taking into account the presence of electric networks, an extended electromechanically coupled Bernoulli-Euler beam theory for passive piezoelectric composite structures is shortly introduced in the first part of our contribution. The second part of the paper deals with the concept of passive shape control of beams using shaped piezoelectric layers and tuned inductive networks. It is shown that an impedance matching and a shaping condition must be fulfilled in order to perfectly cancel vibrations due to an arbitrary harmonic load for a specific frequency. As a main result of the present paper, the correctness of the theory of passive shape control is demonstrated for a harmonically excited piezoelelastic cantilever by a finite element calculation based on one-dimensional Bernoulli-Euler beam elements, as well as by the commercial finite element code of ANSYS using three-dimensional solid elements. Finally, an outlook for the practical importance of the passive shape control concept is given: It is shown that harmonic vibrations of a beam with properly shaped layers according to the presented passive shape control theory, which are attached to an resistor-inductive circuit (RL-circuit), can be significantly reduced over a large frequency range compared to a beam with uniformly distributed piezoelectric layers.

• Steel and Composite Structures
• /
• 제42권5호
• /
• pp.685-697
• /
• 2022

In this paper, a vibration-based method using the change ratios of modal data and the experience-based learning algorithm is presented for quantifying the position, size, and interface layer of delamination in laminated composites. Three types of objective functions are examined and compared, including the ones using frequency changes only, mode shape changes only, and their combination. A fine three-dimensional FE model with constraint equations is utilized to extract modal data. A series of numerical experiments is carried out on an eight-layer quasi-isotropic symmetric (0/-45/45/90)s composited beam for investigating the influence of the objective function, the number of modal data, the noise level, and the optimization algorithms. Numerical results confirm that the frequency-and-mode-shape-changes-based technique yields excellent results in all the three delamination variables of the composites and the addition of mode shape information greatly improves the accuracy of interface layer prediction. Moreover, the EBL outperforms the other three state-of-the-art optimization algorithms for vibration-based delamination detection of composites. A laboratory test on six CFRP beams validates the frequency-and-mode-shape-changes-based technique and confirms again its superiority for delamination detection of composites.

• 한국전산구조공학회논문집
• /
• 제25권4호
• /
• pp.293-300
• /
• 2012

본 논문에서는 직교이방성 적층평판에서의 균열생성 및 전파로 이루어진 층간분리해석을 다룬다. 기존의 p-유한요소가 가지고 있는 요소의 강건성을 균열진전해석에 적용하여, 균열진전시 모델링을 재구성하지 않고, 균열 선단부에 해당되는 꼭지점 모드의 위치만을 이동하도록 하여, 요소망을 단순화시켰다. 이와 같은 층간분리해석에 대해서 이 논문에서의 주요 목적은 다음 두 가지이다. 첫째, 적층복합 재료의 층간분리해석 시, 일반적인 유한요소 모델과 비교하여 매우 간단한 요소망을 가지는 모델을 제안하는 것이다. 모델의 타당성을 평가하기 위해 적층 복합재료로 구성된 이중 외팔보 해석을 통하여, 기존 참고문헌 값과의 비교를 수행하였다. 둘째, 제안된 모델을 내부균열을 갖는 적층평판의 층간분리해석에 적용하여 여러 가지 거동 양상에 대한 평가이다. 이와 같은 목적을 수행하기 위하여 로바토 형상함수를 이용한 완전층별요소가 고려되었으며, 선형탄성파괴역학에 기초한 3차원 가상균열닫힘법을 이용하여 에너지 방출률을 산정하였다.