• 한국추진공학회지
• /
• 제22권2호
• /
• pp.66-73
• /
• 2018

밀폐용기 내 Zirconium/Potassium Perchlorate의 연소를 수치적 모델링을 통해 전산해석을 수행하였다. 5차 WENO 공간차분법과 improved delayed detached eddy (IDDES) 난류모델을 사용하여 충격파가 동반되는 내부 유동구조를 모사하였고, 라그랑지안 연소모델을 통해 화약 입자를 계산하였다. 옆면 중앙에 센서가 설치된 원통형 밀폐용기 내부 유동분석을 통해 압력 진동이 발생하는 원인을 규명하였다. 또한 센서 다이어프램 깊이 변화에 따라 측정되는 압력 데이터를 실험값과 비교분석 하였다. 그 결과 센서 탭의 깊이가 약 2.36 mm 이상으로 커지면 유동속도가 아음속으로 감쇠하고 복잡한 eddy가 발생하여 측정값에 큰 불규칙성을 야기하는 현상을 관측하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2002년도 추계 학술대회논문집
• /
• pp.133-138
• /
• 2002

A 3-D axisymmetric computer program is developed to predict the NO behavior in SNCR system for the stoker incinerator with the waste treatment capacity, 200ton/day. To this end a turbulent reacting flow field calculation is made using proper assumption and empiricism. The stoker bed is assumed to be a homogeneous waste-volatilized gaseous state. The initial composition or reactants are assumed based on the data of the ultimate analysis. Turbulent is resolved by k-e model and turbulent reaction is handled by eddy-breakup model harmonized with empirical chemistry data for gaseous combustion, NO and urea reaction. The liquid droplet is traced by Lagrangian method incorporated by aerodynamic drag, Coriolis and crntrifugal forces. Radiation is treated by sensible heat loss model. Calculation results are in good agreement with experimental data at the outlet of post combustion chamber in Daejon 4th industrial complex. The flue gas shows the temperature range of $900\sim1000^{\circ}C$, velocity of 5m/s and NO concentration of 140ppm at the exit while the measured temperature, flue gas velocity and NO concentration are $967^{\circ}C$, $3\sim4m/s$ and $100\sim200ppm$respectively. Using the developed computer program a parametric study has been made with the variation of heat content of waste, castable length and SNCR variables for the determination of proper injector location. In general, the calculated results are consistent and physically acceptable.

• Journal of Mechanical Science and Technology
• /
• 제20권9호
• /
• pp.1459-1474
• /
• 2006

The present study is focused on the development of the RIF (Representative Interactive Flamelet) model which can overcome the shortcomings of conventional approach based on the steady flamelet library. Due to the ability for interactively describing the transient behaviors of local flame structures with CFD solver, the RIF model can effectively account for the detailed mechanisms of $NO_x$ formation including thermal NO path, prompt and nitrous $NO_x$ formation, and reburning process by hydrocarbon radical without any ad-hoc procedure. The flamelet time of RIFs within a stationary turbulent flame may be thought to be Lagrangian flight time. In context with the RIF approach, this study adopts the Eulerian Particle Flamelet Model (EPFM) with mutiple flamelets which can realistically account for the spatial inhomogeneity of scalar dissipation rate. In order to systematically evaluate the capability of Eulerian particle flamelet model to predict the precise flame structure and NO formation in the multi-dimensional elliptic flames, two methanol bluffbody flames with two different injection velocities are chosen as the validation cases. Numerical results suggest that the present EPFM model has the predicative capability to realistically capture the essential features of flame structure and $NO_x$ formation in the bluff-body stabilized flames.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.63-64
• /
• 2012

The present study has numerically investigated the effects of the fuel-side nitrogen dilution on the precise structure and NOx formation characteristics of the turbulent syngas nonpremixed flames. Numerical results indicate that for highly diluted case, the flame structure is dominantly influenced by the turbulence-chemistry interaction and marginally modified by the radiation effect. On the other hand, no-dilution case with the longer flight time and the relatively intermediate scalar dissipation rate is influenced strongly by the radiative cooling as well as moderately by the turbulence-chemistry interaction.

• 한국전산구조공학회논문집
• /
• 제24권6호
• /
• pp.663-673
• /
• 2011

본 연구에서는 FDS code를 이용하여 교량하부창고 화재발생원과 교량높이의 영향을 분석하였다. 헵탄을 이용한 단위가연물의 연소실험, 실물모형 연소실험 결과와 FDS code를 이용한 해석결과의 비교를 통하여 FDS code의 유효성을 검증하였다. 이를 이용하여 교량하부 표준창고구조물의 실제 화재시나리오를 적용하여 교량높이 및 창고내부 가연물에 따른 콘크리트의 폭렬, 강도손실, 보강철근의 강도손실로 나누어 교량의 화재안전성을 평가하였다. 연구결과, 대부분의 교량이 하부창고화재에 대해 폭렬에 취약한 것을 확인할 수 있었다. 화재강도는 도서류가 가장 강하며 30m 높이 교량에 콘크리트의 강도저하, 폭렬 및 보강철근 강도저하를 가장 크게 발생시킬 것으로 예측되었으며, 고무류 창고화재의 경우 30m 이상 높이의 교량에 대해 화재안전성을 확보할 수 있었다.

• 대한환경공학회지
• /
• 제31권10호
• /
• pp.933-940
• /
• 2009

본 연구에서는 분무화염의 기초적인 물리현상을 해명하기 위하여 층류 대향류장에 형성된 분무 화염에 2차원 직접 수치계산(Direct numerical simulation, DNS)을 적용하여, 당량비 및 연료종이 분무화염 구조에 미치는 영향에 대하여 관찰하였다. 기상에 대해서는 질량 보존식, 운동량 보존식, 에너지 보존식을 오일리안(Eulerian) 법으로 계산하였으며, 액적에 대해서는 화염중의 모든 개개의 유적을 라그란지안(Lagrangian) 법으로 추적하였다. 액체 연료로는 n-데칸 ($C_{10}H_{22}$)과 n-헵탄($C_7H_{16}$)을 이용하였으며, 연소반응 모델에는 총괄반응식을 이용하였다. 당량비가 증가함에 따라 착화가 빠르며, 고온영역도 넓게 분포하고 있다. 그러나, 최대 온도치는 당량비가 증가함에 따라 한번 증가한 후 감소하는 경향을 나타내고 있다. 당량비가 클수록 최대 온도가 감소하는 것은 분무화염 내부의 군연소 거동에 의한 냉각효과 때문이라고 생각된다. 또한, n-헵탄은 n-데칸과 비교하여 증발속도가 빠르기 때문에 넓은 고온 영역을 형성하지만 최대 온도는 거의 같은 값을 나타내었다.

• 한국자동차공학회논문집
• /
• 제24권4호
• /
• pp.392-400
• /
• 2016

In this paper, a study based on engine operating conditions versus hybrid excavator engines was conducted about the engine performance and fuel consumption via the 1-D engine simulation model. First of all, engine operating points with performance and emission were determined by driving patterns. The 1-D HFEM(High Frequency Engine Model) was developed for deep insight into engine combustion and the energy conversion phenomena. In accordance with changing operating points, especially High Idle and Rated output conditions, engine parameters and systems such as turbocharger(Waste Gate Turbocharger and Variable Geometry Turbocharger) injection strategies and EGR(Exhaust Gas Recirculation) should be considered. Therefore, various configurations and parametric analysis with optimization methods in hybrid excavator were simulated and optimized by NLPQL(Non-linear Programming by Quadratic Lagrangian algorithm) in 1-D HFEM. As a result, the fuel consumption with the developed hybrid electric excavator engine could be significantly decreased and bsfc(Brake Specific Fuel Consumption) was also reduced about 5 % to 7 % without any performance degradation.

• 대한환경공학회지
• /
• 제27권3호
• /
• pp.286-292
• /
• 2005

본 연구는 향후 산업적으로 질소산화물 규제가 중요한 문제로 대두될 만한 산업용 보일러를 대상으로 수행하였다. 일반적으로 SNCR 방법의 산업용 보일러로의 적용은 혼합을 위한 충분한 체류시간을 제공하지 못한다는 점에서 적합하지 않은 것으로 알려져 있다. 본 연구의 목적은 SNCR 장치의 산업용 보일러 적용가능성을 조사하기 위한 것이다. 구체적으로 연료로 중유를 사용하는 시간당 스팀 발생량 40톤 규모의 산업용 보일러를 연구 대상으로 하였다. 사업용 보일러의 수치 해석을 위한 3-D 직교좌표계 프로그램에는 난류 유동, 난류 연소반응, NOx의 생성과 환원제와의 반응을 통한 소멸반응 등을 포함하고 있다. 또한 개발된 코드에는 Lagrangian 방법에 의한 입자궤적 프로그램이 포함되어 있고, 주입구에서 접선방향으로의 선회효과를 계산에 의해 고려하였다. 선회버너 효과를 고려한 결과 단화염이 생성되었으며 NOx 환원반응에 적합한 온도 영역의 증가로 인해 NOx 제거효율도 향상되었다. 실험결과와의 비교를 통하여 프로그램을 검증하였으며, 계산결과 혼합용 공기 주입을 통한 환원제와의 혼합 향상을 통해서 SNCR 방법의 산업용 보일러 적용가능성을 확인하였다.

• International Journal of Automotive Technology
• /
• 제8권6호
• /
• pp.687-696
• /
• 2007

To increase the reliability of auto-ignition in CAI engines, the thermodynamic properties of intake flow is often controlled using recycled exhaust gases, called internal EGR. Because of the internal EGR influence on the overall thermodynamic properties and mixing quality of the gases that affect the subsequent combustion behavior, optimizing the intake and exhaust valve timing for the EGR is important to achieve the reliable auto-ignition and high thermal efficiency. In the present study, fully 3D numerical simulations were carried out to predict the mixing characteristics and flow field inside the cylinder as a function of valve timing. The 3D unsteady Eulerian-Lagrangian two-phase model was used to account for the interaction between the intake air and remaining internal EGR during the under-lap operation while varying three major parameters: the intake valve(IV) and exhaust valve(EV) timings and intake valve lift(IVL). Computational results showed that the largest EVC retardation, as in A6, yielded the optimal mixing of both EGR and fuel. The IV timing had little effect on the mixing quality. However, the IV timing variation caused backflow from the cylinder to the intake port. With respect to reduction of heat loss due to backflow, the case in B6 was considered to present the optimal operating condition. With the variation of the intake valve lift, the A1 case yielded the minimum amount of backflow. The best mixing was delivered when the lift height was at a minimum of 2 mm.

• 대기
• /
• 제31권5호
• /
• pp.625-635
• /
• 2021

South Korea established the 2050 Carbon Neutral Plan in response to the climate crisis, and to achieve this policy, it is very important to monitor domestic carbon emissions and atmospheric carbon concentration. Both CO₂ and CO are emitted from fossil fuel combustion processes, but the relative ratios depend on the combustion efficiency and the strength of local emission regulations. In this study, the relationship between CO₂ and CO was analyzed using ground observation data for the period of 2018~2020 at Anmyeon-do site and the CO/CO₂ ratio according to regional origin during high CO₂ cases was investigated based on the footprint simulated from Stochastic Time-Inverted Lagrangian Transport (STILT) model. CO₂ and CO showed a positive correlation with correlation coefficient of 0.66 (p < 0.01), and averaged footprints during high CO₂ cases confirmed that air particles mainly originated from eastern and north-eastern China, and inland of Korean Peninsula. In addition, it was revealed that among the cases of high CO₂ concentration, when the CO/CO₂ ratio is high, the industrial area of eastern China is greatly affected, and when the ratio is low, the contribution of the domestic region is relatively high. The ratio of CO₂ and CO in this study is significant in that it can be used as a useful factor in determining the possibility of domestic and foreign origins of climate pollutants.