• 대한기계학회논문집A
• /
• 제29권8호
• /
• pp.1123-1131
• /
• 2005

In this paper, a formulation for a spatial sliding joint, which a general multibody can move along a very flexible cable, is derived using absolute nodal coordinates and non-generalized coordinate. The large deformable motion of a spatial cable is presented using absolute nodal coordinate formulation, which is based on the finite element procedures and the general continuum mechanics theory to represent the elastic forces. And the non-generalized coordinate, which is neither related to the inertia forces nor external forces, is used to describe an arbitrary position along the centerline of a very flexible cable. In the constraint equation for the sliding joint, since three constraint equations are imposed and one non-generalized coordinate is introduced, one constraint equation is systematically eliminated. Therefore, there are two independent Lagrange multipliers in the final system equations of motion associated with the sliding joint. The development of this sliding joint is important to analyze many mechanical systems such as pulley systems and pantograph/catenary systems for high speed-trains.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.666-671
• /
• 2002

For a large structure, substructure based SDM(structural dynamics modification) method is very effective to raise its dynamic characteristics. Dividing into smaller substructures has a major advantage in the aspect of computation especially for getting sensitivities, which are in the core of SDM process. But quite often, non-matching nodes problem occurs in the process of synthesizing substructures. The reason is that, in general, each substructure is modelled separately, then later combined together to form a entire structure model under interface constraint conditions. Without solving the non-matching nodes problem, the substructure based SDM can not be processed. In this work, virtual node concept is introduced. Lagrange multipliers are used to enforce the interface compatibility constraint. The governing equation of whole structure is derived using hybrid variational principle. The eigenvalues of whole structure are calculated using determinant search method. The number of degrees of freedom of the eigenvalue problem can be drastically reduced to just the number of interface degree of freedom. Thus, the eigenvalue sensitivities can be easily calculated, and further SDM can be efficiently performed. Some numerical problems are tested to show the effectiveness of handling non-matching nodes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.77-81
• /
• 2003

SDM (Structural Dynamics Modification) is a tool to improve dynamic characteristics of a structure, more specifically of a base structure, by adding or deleting auxiliary (modifying) structures. In this paper, the goal of the optimal SDM is set to maximize the natural frequency of a base plate structure by attaching serially-connected beam stiffeners. The design variables are chosen as positions of the attaching beam stiffeners, where the number of stiffeners is considered as a design space. The problem of non-matching interface nodes between the base plate and beam stiffeners is solved by using localized Lagrange multipliers, which act to glue the two structures with non-matching interface nodes. As fer the cases of non-matching interface nodes problem, the governing equation of motion of a structure can be considered from the viewpoint of a topological modification, which involves the change of the number of structural members and DOFs. Consequently, the eigenpairs of the beam-stiffened plate structure are obtained by using an eigen reanalysis technique of topological modifications. Evolution Strategies (ES), which is a probabilistic population-based optimization technique that mimics the principles from biological evolution in nature, is utilized as a mean for the optimization.

• International Journal of CAD/CAM
• /
• 제8권1호
• /
• pp.1-10
• /
• 2009

This paper presents a topology optimization approach using element-free Galerkin method (EFGM) for the optimal design of compliant mechanisms with geometrically non-linearity. Meshless method has an advantage over the finite element method(FEM) because it is more capable of handling large deformation resulted from geometrical nonlinearity. Therefore, in this paper, EFGM is employed to discretize the governing equations and the bulk density field. The sensitivity analysis of the optimization problem is performed by incorporating the adjoint approach with the meshless method. The Lagrange multipliers method adjusted for imposition of both the concentrated and continuous essential boundary conditions in the EFGM is proposed in details. The optimization mathematical formulation is developed to convert the multi-criteria problem to an equivalent single-objective problem. The popularly applied interpolation scheme, solid isotropic material with penalization (SIMP), is used to indicate the dependence of material property upon on pseudo densities discretized to the integration points. A well studied numerical example has been applied to demonstrate the proposed approach works very well and the non-linear EFGM can obtain the better topologies than the linear EFGM to design large-displacement compliant mechanisms.

• 한국전산구조공학회논문집
• /
• 제32권4호
• /
• pp.249-256
• /
• 2019

이 논문은 재료의 전기 전도도 분포를 재구성하는 전기임피던스 단층이미지 기법(electrical impedance tomography; EIT)을 제시한다. 이 문제는 구조물 표면의 전극에서 측정된 전위와 계산된 전위의 차를 최소화하여 전기 전도도의 공간적 분포를 재구성하는 최적화 문제로 정의된다. 전류 입력 시 전위를 구하는 정해석 문제의 수학적 모델로서 완전전극모델(complete electrode model; CEM)을 사용하였다. 완전전극모델은 전기 포텐셜에 대한 라플라스 방정식과 전류 입력에 따른 경계조건들로 구성되는 경계값 문제이다. 완전전극모델 해의 정확성을 검증하기 위하여 유한요소법을 이용해 구한 원형 구조물의 전위해와 Technology Computer Aided Design(TCAD) 소프트웨어를 사용해 얻은 결과를 비교하였다. 완전전극모델의 지배방정식과 경계조건을 구속조건으로 하는 최적화 문제를 라그랑주 승수법(lagrange multiplier method)을 이용해 비구속 최적화 문제로 전환하고 라그랑지안의 1차 최적화 조건으로부터 전극에서의 전위 차를 최소화하는 최적의 전기전도도 분포를 도출하였다. 원형 균일영역의 전기 전도도 분포를 재구성하는 역해석 예제를 통해 완전전극모델 기반 EIT 프레임워크의 적용성을 검토하였다.

• 한국전산구조공학회논문집
• /
• 제23권4호
• /
• pp.369-378
• /
• 2010

포화된 다공질매체의 수치해석에서는 일반적으로 고체영역과 유체영역을 동시에 고려한 혼합유한요소해석(Mixed Finite Element Analysis)이 쓰인다. 여기서 고체영역과 유체영역에서의 변수를 계산하기 위해서는 직접법(Direct Method) 또는 반복법(Iterative method)을 사용할 수 있으나, 각 구성물질의 상이한 물리적 특성 때문에 수치안정성을 확보하기 위해서는 대부분 스태거드 방법(Staggered method)이 제안된다. 본 논문에서는 수치안정성을 높인 스태거드 방법에서 영역 분할기법 중 하나인 FETI(Finite Element Tearing and Interconnecting)기법을 고체영역에 접목시켜 수치효율성을 증대시키는 방법이 제안되었다. 고체영역에서 라그랑지 승수와 Conjugated Gradient Method를 이용해 영역 분할이 진행되고 MPI(Message Passing Interface) 라이브러리를 사용하여 수치 효율성을 검증하였다.

• 전자공학회논문지
• /
• 제52권8호
• /
• pp.3-9
• /
• 2015

본 논문에서는 사용 가능한 최대 송신 전력과 만족해야 하는 최소 전송률에 대한 제한 조건 아래에서, maximal ratio transmission (MRT) 기법 사용 시 다중 사용자 다중 안테나 하향링크 시스템의 에너지 효율을 최대화하는 최적의 안테나 수와 송신 전력을 찾는 알고리즘을 제시한다. 순시 채널에 대한 최적화 문제는 직접 풀기 어려우므로 단말 간 채널의 독립성, 평균 채널 이득, 평균 path loss를 이용하여 근사한다. 근사된 에너지 효율에 대한 최적화 문제는 두 개의 변수를 동시에 고려해야 하는 2차원 최적화 문제가 된다. 우리는 이러한 2차원 최적화 문제를 라그랑지 승수법과 제안하는 알고리즘을 통하여 최적의 안테나 수와 송신 전력을 구한다. 실험을 통해, 제안하는 알고리즘으로 구한 최적의 송신 안테나 수와 송신 전력이 exhaustive search로 찾은 값과 근사함을 확인한다.

• Structural Engineering and Mechanics
• /
• 제56권6호
• /
• pp.959-982
• /
• 2015

In this study, a non-stationary random earthquake Clough-Penzien model is used to describe earthquake ground motion. Using stochastic direct integration in combination with an equivalent linear method, a solution is established to describe the non-stationary response of lead-rubber bearing (LRB) system to a stochastic earthquake. Two parameters are used to develop an optimization method for bearing design: the post-yielding stiffness and the normalized yield strength of the isolation bearing. Using the minimization of the maximum energy response level of the upper structure subjected to an earthquake as an objective function, and with the constraints that the bearing failure probability is no more than 5% and the second shape factor of the bearing is less than 5, a calculation method for the two optimal design parameters is presented. In this optimization process, the radial basis function (RBF) response surface was applied, instead of the implicit objective function and constraints, and a sequential quadratic programming (SQP) algorithm was used to solve the optimization problems. By considering the uncertainties of the structural parameters and seismic ground motion input parameters for the optimization of the bearing design, convex set models (such as the interval model and ellipsoidal model) are used to describe the uncertainty parameters. Subsequently, the optimal bearing design parameters were expanded at their median values into first-order Taylor series expansions, and then, the Lagrange multipliers method was used to determine the upper and lower boundaries of the parameters. Moreover, using a calculation example, the impacts of site soil parameters, such as input peak ground acceleration, bearing diameter and rubber shore hardness on the optimization parameters, are investigated.

• Structural Engineering and Mechanics
• /
• 제40권5호
• /
• pp.637-654
• /
• 2011

The present paper studies the variation of the natural frequencies and mode shapes of rectangular plates carrying a three degree-of-freedom spring-mass system (subsystem), when the subsystem changes (stiffness, mass, moment of inertia, location). An analytical approach based on Lagrange multipliers as well as a finite element formulation are employed and compared. Numerically reliable results are presented for the first time, illustrating the convenience of using the present analytical method which requires only the solution of a linear eigenvalue problem. Results obtained through the variation of the mass, stiffness and moment of inertia of the 3-DOF system can be understood under the effective mass concept or Rayleigh's statement. The analysis of frequency values of the whole system, when the 3-DOF system approaches or moves away from the center, shows that the variations depend on each particular mode of vibration. When the 3-DOF system is placed in the center of the plate, "new" modes are found to be a combination of the subsystem's modes (two rotations, traslation) and the bare plate's modes that possess the same symmetry. This situation no longer exists as the 3-DOF system moves away from the center of the plate, since different bare plate's modes enable distinct motions of the 3-DOF system contributing differently to the "new' modes as its location is modified. Also the natural frequencies of the compound system are nearly uncoupled have been calculated by means of a first order eigenvalue perturbation analysis.