• Food Science of Animal Resources
• /
• v.30 no.4
• /
• pp.597-602
• /
• 2010

In this study, pigs [n=117; (Landrace ${\times}$ Yorkshire) ${\times}$ Duroc; $64{\pm}0.5$ Kg initial body weight] were used to investigate the effect of feeding different levels of lacquer (Rhus verniciflua Stokes) meal on performance, carcass traits and quality of meat kept under refrigeration at $3{\pm}1^{\circ}C$. The pigs were randomly allotted to 3 treatments on the basis of body weight and sex and each treatment was replicated 3 times (13 pigs in each replicate). Lacquer meal in sawdust form obtained from the stem bark and heartwood of sun-dried lacquer trees was added to the grower and finisher diets at 0, 20 and 40 g/kg diet. The experimental diets were fed for 8 wk. Inclusion of lacquer meal had no influence (p>0.05) on growth performance of pigs. Improvement in carcass traits and decreased back fat thickness were noticed in pigs fed diets added with 20 and 40 g/kg lacquer meal. Longissimus muscle obtained from pigs fed lacquer meal had higher moisture and lower fat content, thiobarbituric acid reactive substances and water holding capacity. Meat from lacquer fed pigs was also darker and redder. The data indicates that lacquer meal can be incorporated up to 40 g/kg in the diet of fattening pigs without affecting growth performance. Also, lacquer meal increases carcass lean content and improves the oxidative stability of the meat.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.1
• /
• pp.61-64
• /
• 2000

FT-IR/ATR analysis shows that the oriental lacquer coating network degrades mostly in the unsaturated side chain. The rate of increase in carbonyl intensity (a measure of photodegradation) during the accelerated weathering test was substantially different for the unstabilized and stabilized samples; adding 2 wt% HALS into the oriental lacquer formulation enhanced photostabilization up to three times. Weight loss measurements, another indication of photodegradation, and SEM analysis support this conclusion. Despite the presence of the photo-stabilizer, the other properties of the lacquer were not significantly affected. In particular, the curing behavior of purified lacquer (PL) and HALS-stabilized samples is similar, although the in-situ DETA analysis showed that addition of HALS can slightly retard the cure reaction rate in oriental lacquer coating. It is hypothesized that this cure retardation may be related to the salt formation between HALS and acid of oriental lacquer.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.2
• /
• pp.69-80
• /
• 2023

This study conducted scientific analyses on eight objects of wooden lacquerware to understand the manufacturing techniques of wooden lacquerware in the late Joseon Dynasty. The results of lacquer layer analysis with a microscope and scanning electron microscopy-energy dispersive X-ray spectrometry revealed that most samples were composed of 1-3 lacquer layers. Moreover, a red-colored layer was found to be red ocher and cinnabar, and Fourier-transform infrared spectroscopy analysis was carried out to determine the components of the lacquer layer. The detected components were mostly lacquer and partially cashew shell nut liquid.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.3
• /
• pp.24-33
• /
• 1987

This study was executed to investigate scanning electron microscopic characteristics of Korean Rhus lacquer coats. With the unrefined coat, distilled water, sodium hydroxide, acetic acid, ethyl alcohol, cold-check test, and accelerated weathering were performed after refining treatment. These treated lacquer coats were discussed through observation by scanning electron microscope and the obtained results were summarized as follows: 1. Compared with unrefined coat, the refined coat of Korean Rhus lacquer showed more even surface with regular distribution of dispression. 2. Korean Rhus lacquer coat heated at $120^{\circ}C$ for 3 hours revealed no observable difference irrespective of refining and unrefining. 3. Korean Rhus lacquer coat treated by distilled water, sodium hydroxide, acetic acid. ethyl alcohol, cold-check test. and ultraviolet radiation showed significant characteristics compared with untreated coat. Especially. large deformation and checkings were observed by cold-check test and ultraviolet radiation respectively. 4. The Korean Rhus lacquer coat radiated by ultraviolet ray showed 0.11 duller and 1.41 brighter than non-radiated coat through color difference calculator.

• Journal of the Korea Furniture Society
• /
• v.27 no.1
• /
• pp.26-34
• /
• 2016

Lacquer has a high value as a coating of typical arts and crafts in East Asia including Korea, Japan, and China and traditional representative of the gorgeous satin that is fit to the cultural conditions of each region. Lacquer is harmless to the human body and its robustness, preservatives, moth proofness, and strong heat resistance can maintain a long life. It seems that it will be able to make a significant contribution to create a variety of products if we continually study and raise the productivity and quality of the goodness of these lacquer. In this context, we reviewed the Pitae lacquer wares, which is one of the lacquer of traditional techniques that can be applied to the development of daily necessities and cultural product. Joining the goodness of harmless and environment-friendly lacquer and the characteristics of the leather that can produce a variety of physical beauty can develop household goods of tradition and modernity in harmony. It is worthwhile re-interpreting the tradition in the aspect that we can develop our culture from a modern, plastic, and artistic point of view.

• Journal of Conservation Science
• /
• v.37 no.3
• /
• pp.302-311
• /
• 2021

This study uses traditional lacquer techniques to coat the metal surface and evaluates its physical properties to check the applicability of the lacquer coating. For this purpose, a total of six specimens were produced by setting the variation conditions for the number of times (1, 2, 3) and the heating temperature (120℃, 150℃) using SS275 metal(60*60 mm) and 'Wonju lacquer'. For analysis, chromaticity measurements, contact angle/surface energy measurements, Chemical Resistance, and cross-cut tests were used. The analysis showed that the corrosivity was improved and the adhesion of lacquer to the metal surface was excellent. There was no significant change in contact angle/surface energy. Also, there was no significant difference in color. Through this study, it was confirmed that lacquer on metal surfaces improves waterproofing and has a anticorrosion effect. We could also check the proper number of lacquer and heating temperature. Additional physical characteristics such as hardness and wear rate should be studied. It is also necessary to study how lacquer can be painted with a certain thickness.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.105-112
• /
• 2008

Grading of the urushi lacquer is quite difficult because of large variations depending on origin, growing conditions, time acquisition, storage conditions. It is urgently required to establish a grading system of urushi lacquer by combining traditional method with scientific methods. Traditional grading of urushi lacquer was done by visual inspection of 10 experts who are working on urushi lacquer industry. Common aspects of the experts were color, odor, viscosity, spread properties on Hanji, color and drying properties on glass based the traditional grading system. In addition, rubbing on Hannj and heating with alcohol lamp was also used to grade urushi lacquer. The grading results of 10 experts showed that chinese urushi lacquer (E) of 7.03, japanese urushi lacquer (C) of 6.84, domestic urushi lacquer of (A) of 6.41 and another chinese urushi lacquer (D) of 5.27, and domestic urushi lacquer (B) of 2.50 in descending order. The degree of spread on Hanji was not consistent among 10 experts. These results indicated that the traditional grading system was pretty much personal and required of developing more objective method based on scientific background.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.4
• /
• pp.81-90
• /
• 2003

In this study, we investigated the weathering properties of Korean Rhus lacquers containing tung oil and their potential use as exterior coatings. The finished lacquers were prepared with a raw Korean Rhus lacquer or refined Korean Rhus lacquer content of 10, 20, 30 and 40 wt.% (corresponding to ratios of 10/90, 20/80, 30/70 and 40/60 by weight of Korean Rhus lacquer/tung oil, respectively). The curing temperature of the prepared lacquer increased with increasing the content of the raw Korean Rhus lacquer. This increased curing temperature is related to higher proportion of hydroxyl groups in the prepared lacquer, due to the content of the raw Korean Rhus lacquer. In accelerated weathering testing, the changes in the gloss and contact angle of the prepared lacquers showed a similar trend to that of traditional exterior oil stain. In addition, the prepared lacquers containing tung oil showed greater discoloration than traditional exterior oil stain. However, the discoloration of the prepared lacquer with a raw Korean Rhus lacquer content of 40 wt.%, and that of the prepared lacquer with refined Korean Rhus lacquer contents of 30 wt.% and 40 wt.%, showed a similar trend to that of traditional exterior oil stain. Consequentially, these prepared lacquers showed a potential for being used as exterior coatings.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.1-9
• /
• 2018

Nowadays, synthetic resin varnish such as cashew nut shell liquid (CNSL) is being used as well as traditional lacquer. The code of ethics states that material must be identical to the original when preserving cultural heritage. Therefore, lacquer should be used. However, problem is that even experts have difficulties differentiating lacquer and CNSL as they have similar components. Therefore, this study was carried out to identify the difference between lacquer and CNSL using IR and Py-GC/MS. As a result of IR, in lacquer, $720cm^{-1}$ peak was detected and in CNSL, $750cm^{-1}$, $720cm^{-1}$ and $700cm^{-1}$ peaks were detected. The results of Py-GC/MS detect benzene compounds and alkyl chains for both varnishes. However, hexanoic acid was detected from CNSL but not lacquer. Using these analytical methods, the differences between lacquer and CNSL can be identified on the scene. This is expected to be applied to the authentic conservation and restoration of lacquerware.

• Korean Journal of Plant Resources
• /
• v.26 no.1
• /
• pp.103-110
• /
• 2013

Lacquer has traditionally been used to varnish. Many reports have revealed that lacquer has anti-microbical, anti-cancer, and anti-inflammatory activities. However, urushiol and their derivatives were known as an allergen. Therefore, we expected that lacquer will be used as a good health-food source if its side effect was solved. Here we analyzed their allergy induced constituents by using the GC/MS and evaluated comparative concentration of lacquer, puerariae radix and their mixture extracts. Our results showed that lacquer extract has allergenic compounds and mixture extract with puerariae radix has relatively lower amount. However, lacquer/puerariae mixture extract has strong anti-allergenic effects on the RBL-2H3 cell and puerariae extract was blocked allergenic effect caused by allergenic constituents contained in lacquer.