• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.11a
• /
• pp.440-443
• /
• 2005

In this paper, we introduce about a new class to analysis of partial discharge signal based on Fuzzy model. We can early diagnose life of power cable through detection of partial discharge signal. However, partial discharge signal detector is difficult because of partial discharge signal is very non-linear. Also, it is very difficult work that separate partial discharge signal from noise. We constructed partial discharge accumulation detection system that use Labview for detection of non-linear partial discharge signal. And analyzed partial discharge signal that is detected by Labview system utilizing Fuzzy model.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.6
• /
• pp.339-346
• /
• 2019

Multi-axis servo systems are widely used in various fields such as industiral systems for improving production efficiency, robotics and complex systems where many mechanical devices and sensor systems are connected. Such a servo system requires that the servo control technique to realize the synchronization of the drive shaft in the steady state and transient conditions and to control so as to follow the target track in order to improve product precision and production efficiency. In addition, embedded type hardware is required for smooth control of the entire multi-axis system. Therefore, this paper uses hardware based on FPGA which is widely used in digital signal processing field and various control system because hardware design change is easy and parallel processing is possible. In addition, Labview based servo motor control program was studied that can control the servo motor by ensuring the performance and flexibility of the FPGA and follow the target trajectory according to various speed processing and accurate timing synchronization.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1382-1383
• /
• 2008

In this paper, we have studied for analysis of the partial discharge(PD) signal based on fuzzy algorism. Partial discharge signal detector is difficult because of partial discharge signal is very non-linear. Also, it is very difficult work that separate partial discharge signal from noise. We constructed partial discharge accumulation detection system that use Labview for detection of non-linear partial discharge signal. And analyzed Partial discharge signal that is detected by Labview system utilizing Fuzzy model.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.4
• /
• pp.151-157
• /
• 2012

This paper implements an effective attendance management and monitoring system utilizing the RFID(Radio Frequency IDentification) and Smart phone for student. In this paper, RFID system use 13.56MHz to control the attendance, and we can show that information of RFID and dynamic image through IP camera in Smart phone. We also make up the contents and database utilizing the labview program in computer. Especially, proposed technique can obtain dynamic image by server implementation at real time basis so that it is possible to use simultaneously several Smart phone. From the various and practical experiment, it is confirm that proposed system is useful for attendance management and remotely monitoring.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.4
• /
• pp.67-73
• /
• 2011

We developed a RFID system to effective management and monitoring for school assert. In this paper, RFID system implemented a two way which are control to 13.56MHz for in/outbound order and 2.45GHz for positioning tracking and monitoring. We also make up the contents and database utilizing the labview tool in pc. In addition, the developed system can obtain simultaneously the information from several RFID reader at real time so that it is possible to track the position system, the path moving and the status of asserts in the school. Especially, 2.45GHz system has a function to prevent a assert theft. It is observed from the various and practical experiment that the proposed system is useful for assert management and monitoring.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.559-564
• /
• 2004

This paper deals with the device for measuring the time-varying magnetic fields and induced voltages caused by lightning discharges. The two magnetic field measuring systems were designed and made. One consists of the loop-type magnetic field sensor with the active integrator operated by a differential amplifier. The other consists of the loop-type magnetic field sensor and Labview software. The loop-type magnetic field sensor detects the time derivative of the magnetic field being measured, and the signal detected is integrated by the Labview software. As a consequence, from the calibration experiments, the frequency bandwidth of the full measuring system ranges from 400 [Hz] to 1 (MHz) and the response sensitivity are 0.98 (mV/nT) and 22 (mV/nT) for the magnetic field sensor of 2 turns and 6 turns, respectively. Also, the results obtained by the two measuring devices well agreed with each other.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.6
• /
• pp.425-432
• /
• 2004

In this paper, we introduce the analog memory fabricated in a 0.35${\mu}{\textrm}{m}$ single poly standard CMOS process. We measured the programming characteristics of the analog memory cell such as linearity, reliability etc. Finally, we found that the characteristics of the programming of the cell depend on the magnitude and the width of the programming pulse, and that the accuracy of the programming within 10mV is feasible under the optimal condition. In order to standardize the characteristics of the cell, we have investigated numbers of cells. Thus we have used a program named Labview and a data acquisition board to accumulate the data related to the programming characteristics automatically.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.849-851
• /
• 2010

This paper applicate to the large flowers management house, personal office or home, which breed flowers for the profit or hobby. We suggest flower water supply assistant, which supply water anytime to prevent die from water shortage. Our system applicate to the flowerpot less than two at first. We measure humidity by use humidity sensor and control water supply valve automatically. The water supply valve will be opened when the humidity drop to the less than critical values.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.8
• /
• pp.1351-1359
• /
• 2007

In this paper, we have studied the power quality(PQ) diagnosis system with the two methods for PQ diagnosis. One to Apply a regulation value in compliance with mathematics calculation, and the other Automatic identification using Neural network algorithm. Neural network algorithm is used for an automatic diagnosis of the PQ. The regulation proposed by IEEE 1159 Working group is applied for the precision of the diagnosis. In order to divide accurate segmentation, the algorithm for a computer training used the back propagation out of several neural network algorithms. We have configured the proto-type sample by using Labview and a programmed Neural Networks Algorithm using with C. And arbitrary electric Signal generated by OMICRON Company's CMC 256-6 for an efficiency test.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.3
• /
• pp.569-574
• /
• 2008

In Because DTV comes to origin of car body shock or brake pedal flutter occurrence in car. This in development of measurement device that can examine this in driver protection dimension or at production early sending of goods visual point purpose of this study have. In this paper, I developed portable Brake Judder measurement system by use of the DTV.