• Journal of Biosystems Engineering
• /
• v.27 no.2
• /
• pp.89-96
• /
• 2002

The trend of consumption of vegetable soybeans is increasing because they are recognized as the clean vegetable. The works requiring the most intensive labor are threshing and seperation ones, and they form about 80% of total labour for vegetable soybeans production. It is necessary to develop the vegetable soybeans-thresher for the sake of cost down of vegetable soybeans production. The purpose of this study is to acquire the basic informations to design of the vegetable soybeans-thresher. We make the experimental system which control the speed of threshing cylinder and the teeth gap and investigate the detachment forces. The result are as follows ; The ratio of un-threshed soybeans-pod to stem after threshing work is decreasing as the threshing cylinder speed increases: 0.0% and 2.8% at 55m/s and 18m/s of threshing cylinder speed respectively. Also the ratio of un-threshed soybeans-pod to stem is shown as 2.0% below in the condition of 64~160mm of teeth gap and over 28m/s of threshing cylinder speed. The damaged pod ratio of detached soybeans after threshing work is decreasing as the threshing cylinder speed increases: 4.8% and 1.3% at 55m/s and 18m/s of threshing cylinder speed respectively. The minimum damaged pod ratio of detached soybeans are shown as 1.0%, 1.5% and 1.9% at 18m/s, 28m/s and 37m/s of threshing cylinder speed respectively. The average detachment forces of pods are shown as 1.5kg$_{f}$ for 3 grains, 1.2kg$_{f}$ for 2 grains and 0.8kg$_{f}$ for 1 grain respectively. The maximum detachment force of pod is shown as 2.7kg$_{f}$ for 3 grains. grains.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1907-1917
• /
• 2010

It is much needed research for ocean scientists to implement a digitizing system that effectively extracts and digitializes sea level records accumulated from the past. The main difficulty of such a system is huge anount of data to be processed. In this paper, we implement a digitizing system to handle such mass-data of sea level records. This system consists of a pre-process step, a digitizing step and a post-process step. In pre-process step, the system adjusts skewnesses of scanned images and normalizes the size of images automatically. Then, it extracts a graph area from images and thins the graph area in digitizing step. Finally, in the post-process step, the system tests the reliability. It is cost-effective and labour-reducing software for scientists not wasting their time to such boring manual digitizing jobs.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.10 no.1
• /
• pp.169-181
• /
• 2008

The purpose of this study was to produce Pleurotus ostreatus using fermenter with bag cultivation. These results are as follows. 1. While mushroom composts were being fermented in a fermenter, the physical property of the fermented composts was getting better when there isn't any screw or revolving flies in the fermenter and the strength of pressing the composts was getting less. 2. The composts were fermented well as slaked lime of 1% density added to the composts. 3. According to the result of examining our fermenting ways, composts were in the best condition after being fermented for 48 hours since the temperature in a fermenter has come to 60℃, which could be reached by heating the fermenter by 40℃ after putting compost materials and water into it. 4. The good condition of fermenting could be maintained by controlling the speed of revolving flies, therefore the speed be down when the temperature is above 60℃ and up bellow 60℃. 5. Since the composts had been added with 1.5~2% of cottonseed meal or rice bran, the fermented composts were in good condition and also the quantity and quality of the mushroom produced on the fermented composts were satisfied. 6. There were needed 7 hours of labour for 3days from the first day of putting composts into a fermenter for fermenting 3.5M/T(10,000~12,000bags of 750~800g per bag) of composts to the third day of finishing the fermenting work, and also the cost was 112,066￦(130$) including 52,066￦(60$) of electric charge and fuel expense.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.3
• /
• pp.131-136
• /
• 1990

여러해 전부터 선박의 생산실적이나 생산성 관련 자료를 기록하고 보완하는 작업을 꾸준히 개선토록 노력해온 결과중 중요한 것 하나는, 선박의 여러 가지 설계 검토과정에서 충분히 활용할 수 있는 함축성 있고 믿을만한 형태의 생산정보를 제공해줄 수 있게 되었다는 것이라고 말 할 수 있겠다. 이러한 자료들은 생산계획상 각 단계(stage)에서의 작업량, 예상재료비와 인건비의 산출등이 포함될 수 있으며, 선박이나 해상구조물의 전반적인 설계방법론(design methodology)을 개선코자 한다면 ''생산지향적 설계(Design for Production)''의 근간이 되는 선박건조전략(build strategy), 구매정책(purchasing policy)과 생산기술(production technology)에 대한 폭넓은 지식이 한데 어우러져야 한다. 최근에는 CIMS의 일부분에서 보는 바와 같은 경영관리, 설계 및 생산지원 시스템의 도입으로 이와 같은 설계 프로세스의 추진을 가능케하고 있다. 이와 병행하여 설계를 지원하기 위한 전산기술, 특히 대화형 화상처리기술(interactive graphics)의 발달은 설계자가 선박의 형상이나 구조 배치를 여러 가지로 변화시켜 가면서 눈으로 즉시 확인할 수 있도록 설계자의 능력을 배가시키는데 크게 기여하고 있다. 여러 가지의 설계안(alternative design arrangement)을 신속히 만들어내고 이를 즉시 검토 평가할 수 있는 능력을 초기설계 단계에서 가질 수 있다면 이는 분명히 큰 장점일 것이며, 더구나 설계초기 단계에 생산관련인자를 설계에서 고려할 수 있다면 이는 더욱 두드러진 발전일 것이다. 생산공법과 관련생산 비용을 정확히 반영한 각 가지의 설계안을 짧은 시간내에 검토하고 생산소요 비용을 산출하여 비교함으로써, 수주계약단계에서 실제적인 생산공법과 신뢰성있는 생산실적자료를 기준으로 하여 총 건조비(total production cost)를 최소로 하는 최적의 설계를 선택할 수 있도록 해 줄 것이다. 이제 이와 같은 새로운 설계도구(design tool)를 제공해 주므로써 초기설계에 각종 생산관련 정보나 지식 및 실적자료가 반영가능토록 발전되었다. 본 논문은 영국의 뉴카슬대학교(Univ. of Newcastle upon Type)에서 위에 언급한 특징들을 반영하여 새로운 선박구조 설계 방법을 개발한 연구결과를 보여주고 있다. 본 선계연구는 5단계로 구분되는데; (1) 컴퓨터 그라픽스를 이용하고 생산정보 데이타베이스와 연결시켜 구조형상(geometry)을 정의하고 구조부재 칫수(scantling) 계산/결정 (2) 블럭 분할(block division) 및 강재 배치(panel arrangement)의 확정을 위해 생산기술 및 건조방식에 대한 정보 제공 (3) 상기 (1) 및 (2)를 활용하여 아래 각 생산 단계에서의 생산작업 분석(work content assessment) a) 생산 준비 단계(Preparation) b) 가공 조립 단계(Fabrication/Assembly) c) 탑재 단계(Erection) (4) 각각의 설계(안)에 대하여 재료비(material cost), 인건비(labour cost) 및 오버헤드 비용(overhead cost)을 산출키 위한 조선소의 생산시설 및 각종 품셈 정보 (5) 총 건조 비용(total production cost)을 산출하여 각각의 설계안을 비교 검토. 본 설계 방식을 산적화물선(Bulk Carrier) 설계에 적용하여 구조배치(structural geometry), 표준화의 정도(levels of standardisation), 구조생산공법(structural topology) 등의 변화에 따른 설계 결과의 민감도를 분석(sensitivity studies)하였다. 전산장비는 설계자의 대화형 접근을 용이하도록 하기 위해 VAX의 화상 처리장치를 이용하여 각 설계안에 대한 구조형상과 작업분석, 건조비 현황 등을 제시할 수 있도록 하였다. 결론적으로 본 연구는 설계초기 단계에서 상세한 건조비 모델(detailed production cost model)을 대화형 화상 처리방법에 접합시켜 이를 이용하여 여러가지 설계안의 도출과 비교검토를 신속히 처리할 수 있도록 함은 물론, 각종 생산 실적정보를 초기설계에 반영하는 최초의 시도라고 믿으며, 생산지향적(Design for Production) 최적설계분야의 발전에 많은 도움이 되기를 기대해 마지 않는다. 참고로 본 시스템의 설계 적용결과를 부록에 요약 소개하며, 상세한 내용은 참고문헌 [4] 또는 [7]을 참조 요망한다.

• Journal of the Korean Home Economics Association
• /
• v.32 no.5
• /
• pp.165-182
• /
• 1994

Korea's clothing industry which has been country's leading export industry and basic strategical industry is now faced with many difficulties both domestically and internationally. Domestically it is faced with continuing shortage of manpower in both production line and management high labour cost causing increase in price putting more weight on behavior of consumers resulting in change of industrial environment and continuing structural problems of industry itself. Internationally it is faced with strengthening of import regulations and protectionism of developed countries and rapid emergence of underdeveloped countries as leading exporting nations. In reality export plays the most essential role in our economy and is especially sensitive to the external environmental factors. Already economic bloc phonomenon can be seen everywhere and is continuing to accelerate in place such as E. U in Europ, North & South America as NAFTA, and South East Asian contries which recent tendency of economic unity effort is present. These countries of such economic blocs are imposing heavy custom duties reinforcing provision of country origin and acting out strict inspection regulations in order to protect the interest of their own industry. Therefore it is vital to manufacture excellent quality goods For these reasons study in this area has brought attention in Korea as well as worldwide in the recent years. Apparel industry which requires professional technology and ability is the most competitive international business. In order to challenge the international market the high level of intelligence is most required to produce high quality goods. The purpose of this study is to analyze the relationship between functions and roles of marketing and to approach problems in more efficient manner. Apparel industry is composed of various programs such as design pattern making merchandising and textile science. To succeed in the business is to give the highest satisfaction to the targeted market. Hence this study will example the factors that determine the Cost Quality and Performance of apparel products. The study will involve following steps; firstly establish relationship between the quality concept and productivity of apparel products Secondly inquire in to marketing strategy laying stress on apparel production related factors focusing on merchandising marketing production and operations Thirdly prospect 21st century apparel industry focusing on garment production and trade and also other countries structural improvement Fourthly establish the new dimension of competitive factors by grasping the actual circumstance of Korea's apparel industry in the international market. The research method will include; First reality approach method by analysing the present state of industry Second literal analysis such as marketing comparisons between leading apparel exporting countries.

• Journal of the Korean Society of Costume
• /
• v.57 no.2 s.111
• /
• pp.69-85
• /
• 2007

Despite the recovery of consumer expenditure and retailing in the Korean economy after 2001, the domestic apparel industry has been aggravated by negative growth in both productivity and production. The purpose of the stud? is to diagnose the develop competitive of the Korean apparel industry and derive implications for this after estimating the efficiency of the Korean apparel companies with Data Envelopment Analysis. Data Envelopment Analysis(DEA) is a methodology based in non-parametric analysis and linear programming. It was developed for measuring the relative efficiency of a set of firms that use inputs to produce outputs. Data used fer input and output variables in the analysis are drawn from financial statement recorded by the Korean Financial Supervisory Service. The initial input data comprise the number fo the employees, fixed assets, general management and selling expenses, and cost of sales. The initial outputs are the operating profit and the gross margin. To summary the results, the efficiencies of the Korean apparel companies has increased yearly in spite of being overabundance of investment in Labour and Capital. According to correlation between input and output variables, the Korean apparel industry has been revamping gradually from labor intensive industries to the capital. The companies need to reduce costs in the results from the number of employees, fixed asset and cost of sales to transform into an efficiently enterprise. The companies owning or obtaining a brand had bitter establish an outsourcing strategic in production, while OEM corporations are called far setting up a manufactory in domestic or abroad. Although the paper is derived some implications with production efficiencies, the relation between apparel companies and brand power, consumption level of consumer, and social trend is remained on a limitation to the study. The next research necessitates a topic with Fashion industry or examining the correlation between brand value, social propensity and profit margin.

• Journal of Mushroom
• /
• v.12 no.1
• /
• pp.17-23
• /
• 2014

pH of oriental medicine sludge was 5.3, which was similar to 5.2 of the main ingredient, corncob. Its sugar content, however, was 4.8 mg/g, which was 2.5 times higher than concorb's 1.9 mg/g. According to the addition content analysis of oriental medicine sludge by using blood agar plate, the experimental group showed much more robust growth than the control group. 10% of oriental medicine sludge was added to corncob and pine tree sawdust for test-tube culture. Then they were cultivated at $25^{\circ}C$ for 6 days after inoculating Flammulina velutipes liquid spawn. The control group and experimental group showed 2.2~3.4 and 5.8~6.4 cm hypae growths respectively. At the field test for 10% herbal medicine refuse, mushroom yield dropped by 5% compared to the control group. However, it had distinctively lower number of deformity and the 2nd grade products. An economic analysis was conducted based on the cultivation facility that produces 160,000 mushrooms per day. The analysis demonstrated that the facility can save 50,000,000 won in the starting year and 130,000,000 won in the following years from the unit cost of production excluding labour and operation cost.

• Korean Journal of Animal Reproduction
• /
• v.19 no.2
• /
• pp.147-152
• /
• 1995

The purpose of this study was to examine the estrus synchronization and superovulation of pigs with hormone treatments. Three different kinds of procedures for synchronization and superovulation were used as follow: I) gilts in natural estrus behavior (control): 2) gilts synchronized with 20mg altrenogest for 9 days regardless of the estrus cycle; 3) gilts received PG600 (400IU PMSG + 200 IU hCG) in 15 day of the estrus cycle; and then gilts administrated with PMSG (1,500 IU) and hCG (750 IU) after altrenogest and PG600 treatment for superovulation. Estrus was checked daily with a boar, in estrus synchronization, the intervals from hormone treatment to estrus were different between PG600 (43/47) and altrenogest (13/53) within 6 days. The percentage of animals displaying a estrus response were not different by hormone treatments. The average number of corpora lutea (C.L) and ovulated embryos were similar between PG600 25.4${\pm}$13.1, 19.0$\pm$12.8 and altrenogest 25.5${\pm}$0.7, 15.0${\pm}$4.2, respectively, but was increased (P<0.05) by hormone treatment compared to that 12.9${\pm}$1.8, 12.7${\pm}$3.9 in the control. The number of normal embryos after ovulation was higher in the control than hormone treatment. Therefore, these results suggest that altrenogest and PG600 treatment could be a valuable for cut down the labour and cost by synchronization.

• Journal of Bio-Environment Control
• /
• v.4 no.1
• /
• pp.32-42
• /
• 1995

Cultivation using rain shelter is very popular in summer because rain shelter has a simple structure using less materials than any other regular greenhouse. Although it has a main advantage of easy construction in terms of labour, time and cost, it has some disadvantage of poor ventilation and rain fall inflow. Therefore, the rain shelters being able to overcome the problems, to some extent, are necessary to propagate for practical purpose. Three characteristic types of rain shelter were analyzed using measured and simulated environment data. Type 1 was a conventional type with an arched roof, and Type 2 and Type 3 were improved ones which were designed to have three arched roofs and three sawtooth like roofs with the openings for ventilation, respectively. The distribution of inside temperature measured was relatively uniform in Type 2 and 3 by the natural ventilation through the openings of the roof compared to Type 1 which had no openings. The relative light transmittance measured in Type 2 and 3 showed lower than that in Type 1, which suppressed the rise of inside temperature, For more accurate comparison, the differences between inside and outside temperatures to various wind speeds were calculated by the model. The difference in Type 1 was the greatest at lower wind speed below 1 ㎧, that is, the highest in inside temperature, but decreased rapidly as wind speed increased above 1 ㎧. Measured temperatures generally showed the same trends as calculated ones by the model. As a whole, the improved rain shelters(Type 2 and 3) showed better performance than the conventional one in ventilation as well as inside temperature.

• Current Research on Agriculture and Life Sciences
• /
• v.19
• /
• pp.23-29
• /
• 2001

This study was carried out to develop a seedling raising method without nursery soils in automatic raising facility of rice seedlings for machine transplanting. Pre-germinated seeds were sowed on the seed trays with three different seats such as paper seat, corrugated board, and polyethylene film instead of nursery soils. The growth characteristics of the seedlings for 20 days after sowing were compared with that of a conventional standard raising method with nursery soils. There was no difference in plant height of 10-day old seedlings among the different nursery methods, but the plant height of seedlings grown for 15 days after sowing in the trays with fivefold newspaper and nursery soils was significantly taller than those on other nursery conditions. Dry weight of seedlings grown in the tray with fivefold newspaper bottom was heavier than those in nursery trays with a corrugated board and a piece of polyethylene film. The seedlings grown in a nursery tray with fivefold newspaper showed better seedling quality and root-mat formation compared with the other nursery trays. This result suggests that the healthy seedlings for machine transplanting can be raised in the paper-sheet tray without nursery soils. The labour hours and cost required for the soil-free method using paper was reduced by about 49.3% and 26.6%, respectively, compared with the semi-adult seedling on nursery soils.