• Korean Journal of Construction Engineering and Management
• /
• v.5 no.2 s.18
• /
• pp.47-54
• /
• 2004

Recently, many high-rise buildings have been constructed, and are under construction. And a high-rise building with more than 100 floors is under planning. From site logistics management point of view, it is very important to manage vertical transportation of resource (e.g., material, equipment and construction labors) in high-rise building construction. The higher the building is constructed, the more important it is to manage for vertical transportation of it. In case of labors, vertical movement needs longer time in high-rise building construction than in low-rise. This results in low productivity and work efficiency of the construction. Therefore, this study presents a process of a vertical movement plan for labors using discrete-event simulation. And then the process applies to MT 130 project, which is a virtual high-rise building construction project.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.869-875
• /
• 2009

Safety is a big issue in the construction sites. For safe and secure management, tracking locations of construction resources such as labors, materials, machineries, vehicles and so on is important. The materials, machineries and vehicles could be controlled by computer, whereas the movement of labors does not have fixed pattern. So, the location and movement of labors need to be monitored continuously for safety. In general, Global Positioning System(GPS) is an opt solution to obtain the location information in outside environments. But it cannot be used for indoor locations as it requires a clear Line-Of-Sight(LOS) to satellites Therefore, indoor location monitoring system could be a convenient alternative for environments such as tunnel and indoor building construction sites. This paper presents a case study to investigate feasibility of Wi-Fi based indoor location monitoring system in construction site. The system is developed by using fingerprint map of gathering Received Signal Strength Indication(RSSI) from each Access Point(AP). The signal information is gathered by Radio Frequency Identification (RFID) tags, which are attached on a helmet of labors to track their locations, and is sent to server computer. Experiments were conducted in a shield tunnel construction site at Guangzhou, China. This study consists of three phases as follows: First, we have a tracking test in entrance area of tunnel construction site. This experiment was performed to find the effective geometry of APs installation. The geometry of APs installation was changed for finding effective locations, and the experiment was performed using one and more tags. Second, APs were separated into two groups, and they were connected with LAN cable in tunnel construction site. The purpose of this experiment was to check the validity of group separating strategy. One group was installed around the entrance and the other one was installed inside the tunnel. Finally, we installed the system inner area of tunnel, boring machine area, and checked the performance with varying conditions (the presence of obstacles such as train, worker, and so on). Accuracy of this study was calculated from the data, which was collected at some known points. Experimental results showed that WiFi-based indoor location system has a level of accuracy of a few meters in tunnel construction site. From the results, it is inferred that the location tracking system can track the approximate location of labors in the construction site. It is able to alert the labors when they are closer to dangerous zones like poisonous region or cave-in..

• Journal of the Korean Society of Safety
• /
• v.2 no.3
• /
• pp.29-35
• /
• 1987

This study as a series of the previous study, "A Study on the Methodology for Planning Safety Prevention, " is to find out what method will be the best for efficient safety instruction using a questionware with the five questions. Based on the answers from directly working labors, this study has been processed with procedures as follows； 1) Review on general safety instruction. 2) Distribute questionwares to only on-the-job labors. 3) Analyze the results from questionwares. 4) Conclude efficient method from the results analyed.

• KIEAE Journal
• /
• v.7 no.2
• /
• pp.39-46
• /
• 2007

A high-rise building construction in Korea has some problems in engineering, construction and management technologies although the high-rise building construction is recently booming. In addition, the lack of skilled construction labors is increasing, so the development for methods is needed to reduce the labors by prefabrication and mechanization. A re-bar work is one of very important works with regard to cost and schedule management in the high-rise building construction. Nevertheless, the re-bar work has some problems that it is needed many re-bars for joints linking and much time for lifting due to high-rise buildings, and it is difficult to level the skill of labors. So, in this study, the pre-fabrication of three-story height in column re-bars is proposed and the results of an implementation are analyzed and explored by a case study. As the results of case study, the pre-fabrication of three-story heights in column re-bars could reduce the cost in the re-bar work and accelerate the time in the structural frame work. In addition, the pre-fabrication of three-story height in column re-bars could solve the problems such as the waste of many re-bars for joints linking, and the lack of the skilled labors.

• Journal of Digital Convergence
• /
• v.14 no.10
• /
• pp.129-136
• /
• 2016

This study aims to explore the influence of the social support services that have an effect on the organizational commitment and service quality of the labors working in the convergence service industry. Data for this study were collected from 233 labors working in the convergence service industry;20 smaller businesses located in Seoul and the metropolitan area. Structural equation modeling analysis method was performed for analyzing key data. As a study result, support of seniors and colleague, which is regarded as the variable of social support, had a significant positive effect on organizational commitment of the labors working in the convergence service industry. It also had a significant positive effect on the service quality that organizational commitment went through the support of the seniors and colleagues. I discussed theoretical and empirical implications with these findings and described the future research.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.2
• /
• pp.83-93
• /
• 2010

Recently there has been a trend of hiring more foreign labors in the Korean construction sites after the introduction of the government policy for foreign workers since 2007, called Employment Permit System(EPS). With the trend in the sites, the skilled and unskilled foreign workers would have become a main resource in the construction site workforce. This study aims to analyzing the effectiveness and the reality of working status for the foreign workforce. In doing so, both mail questionnaire survey and face to face interview with site managers and foreign labors in 38 apartment construction sites around Seoul region have been performed. The results of survey has been compared to the former research, which has been done for foreign labors hired under the old government policy, called Industrial Trainee System. This study found that there still exist many problems in reality of utilizing foreign workers in the sites, and proposed various recommendations for the effective use of foreign labors in the Korean construction industry.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.2
• /
• pp.147-159
• /
• 2011

In this paper the demand and supply of labor are forecasted over the next 10 years for customized nurturing human resource focused on Manufacturing Industry in Chung-Nam Province. Despite that the industrial structure is rapidly changing, industrial labors are nurturing on the basis of past industrial structure. This research is conducted for reducing mismatched labors throughout forecasting human resources until 2020. As a practical approach, the BLS Methodology is partially utilized. And the previous researches and official statistics data are reviewed. In conclusion, this study presents that more human resources on Manufacturing Industry than other Industries will be needed in Chung-Nam province. In details, it shows that there will be required more Industrial labors for strategic industries for examples, Audio and Video related industry, and Car related industry which is propelling by overall local government. In additions, policy implications are developed by analyzing current status and forecasting the labor demand and supply in the Chung-Nam Manufacturing sector.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.4
• /
• pp.76-82
• /
• 2017

I studied existing research and thesis which are relating emotional labor, job-related stress, and service level to set up the structural model and potential factors that form this structural model. The result showed that emotional labor is affecting job-related stress, service delivery level and customer-oriented activities. And service delivery level is affecting customer-oriented activities under 95% confidence levels. Also from the analysis of group survey by working group, check-in agent's emotional labor is affecting on job-related stress, service delivery level and customer-oriented activities. And service level is affecting on customer-oriented activities. By the result of how emotional labor and customer-oriented activities are related, I strongly believe it contributed the study of emotional labor theory.

• Journal of the Korean Society of Safety
• /
• v.22 no.5
• /
• pp.57-64
• /
• 2007

In the field of domestic construction demolition works, work process management system is left behind compared with that of several advanced countries such as US, Japan and UK. Especially, the problems regarding safety management are more serious in terms of the availability of safety manuals and law system. The analysis results fiom the questionnaire survey and interviews with demolition engineers indicated that current safety management practices in demolition works lack systematic approach and inappropriate in securing labors' safe working environment. In addition, field labors and managers strongly requested the improvement of safety educational system. Grounded upon the analyses results and investigations, suggestions were drawn for the establishment of advanced safety educational system.

• Journal of architectural history
• /
• v.11 no.3 s.31
• /
• pp.53-68
• /
• 2002

Since the 17th century, the finance for the government construction was demanded unlike the early chosun dynasty. It was consequent upon a transition in the supply method of materials and labors for the construction. The government construction being enforced in chronic financial difficulties had to undergo lack of funds. Especially, a rising construction cost by purchasing lots of materials including wood, and by employing labors weighted the difficulties. In order to put forward a construction, new and various efforts besides diversification in sources of finance ad been looked for. The efforts were driven in three parts which were to be the management of labor and materials, and the way of construction execution. As a result of spending a great effort to save cost, an extinguished improvement in the way of construction execution came out with 'Injungjeon-yeongkweon' in the year 1805.