• Nuclear Engineering and Technology
• /
• 제12권4호
• /
• pp.267-273
• /
• 1980

Quasistatic 근사법을 이용한 2군 2차원 노심 동특성 코드 HEXKIN은 정육각형 격자 노심 계산용으로 특별히 개발되었다. 이 코드는 최대 15지발중성자군, 279격자점과 각 격자점마다 따로 입력시킬 수 있도록 500가지의 서로 다른섭동 유도함수를 취급할 수 있다. 연료 온도 변화로 인한 반응도 궤환은 출력상태에 좌우되도록 모형화하였다. 이 코드의 정확성을 점검하기 위하여 Savannah River Laboratory에서의 측정자료로 수치실험을 수행하였다. 위의 실험은 특히 지발 중성자의 지연 효과를 강조하기 위해 계획되었다. 계산된 중성자속 틸트는 측정오차 이내에서 측정치와 잘 일치한다.

• 디자인학연구
• /
• 제16권2호
• /
• pp.301-310
• /
• 2003

The interface design of mobile products has become a hot issue recently as a variety of products are being developed for extended usages. There have been two different views on interface design of mobile products like PDAs(personal digital assistants) or cellular phone. One 치aims that the current interface design of PC cannot be directly applied because mobile products have their own specific functions and requirements. On the meantime, the other argues that an extended application of PC metaphors to mobile products can have advantages because users'PC experiences can reduce the learning efforts and thus contribute to intuitive understanding mobile products. In this research, two types of PDAs, developed according to the aforementioned conflicting philosophies were compared and evaluated, based on laboratory-based usability testing conducted by novice users. The experiment consists of asking subjects to perform identical tasks for the two different types of products. The interaction data collected during usability testing were analyzed in terms of time taken, rate of success of tasks and errors. The experiment shows that there were some meaningful effects of users'experience of PC on the usability of PDAs.

• Computers and Concrete
• /
• 제19권1호
• /
• pp.19-31
• /
• 2017

This paper uses modelling and experiment to perform a quantitative analysis for the gypsum and ettringite formations in cement pastes subjected to sulfate attack. Firstly, based on Fick's law and chemical reaction kinetics, a diffusion model of sulfate ions in cement pastes is proposed, and then the model of the gypsum and ettringite formations is established to analyze its contents in cement pastes with corrosion time. Secondly, the corrosion experiment of the specimens with cement pastes immersed into 2.5%, 5.0% and 10.0% $Na_2SO_4$ solutions are carried out, and by using XRD-Rietveld method, the phases of powder samples from the specimens are quantitatively analyzed to obtain the contents of gypsum and ettringite in different surface depth, solution concentration and corrosion time. Finally, the contents of gypsum and ettringite calculated by the models are compared with the results from the XRD experiments, and then the effects of surface depth, corrosion time and solution concentration on the gypsum and ettringite formations in cement pastes are discussed.

• Structural Engineering and Mechanics
• /
• 제62권5호
• /
• pp.631-642
• /
• 2017

Accurate actuator tracking plays an important role in real-time hybrid simulation (RTHS) to ensure accurate and reliable experimental results. Frequency-domain evaluation index (FEI) interprets actuator tracking into amplitude and phase errors thus providing a promising tool for quantitative assessment of real-time hybrid simulation results. Previous applications of FEI successfully evaluated actuator tracking over the entire duration of the tests. In this study, FEI with moving window technique is explored to provide post-experiment localized actuator tracking assessment. Both moving window with and without overlap are investigated through computational simulations. The challenge is discussed for Fourier Transform to satisfy both time domain and frequency resolution for selected length of moving window. The required data window length for accuracy is shown to depend on the natural frequency and structural nonlinearity as well as the ground motion input for both moving windows with and without overlap. Moving window without overlap shows better computational efficiency and has potential for future online evaluation. Moving window with overlap however requires much more computational efforts and is more suitable for post-experiment evaluation. Existing RTHS data from Network Earthquake Engineering Simulation (NEES) is utilized to further demonstrate the effectiveness of the proposed approaches. It is demonstrated that with proper window size, FEI with moving window techniques enable accurate localized evaluation of actuator tracking for real-time hybrid simulation.

• 한국방재학회 논문집
• /
• 제10권1호
• /
• pp.65-72
• /
• 2010

본 연구에서는 댐 붕괴로 인한 홍수파에 영향을 미치는 도시지역의 효과에 대해 두 가지 수리모형실험에 근거하여 수치적으로 분석되었으며, 계산된 지점별 수심은 측정결과와 비교적 잘 일치하였다. 첫 번째 수리모형실험에 대해 도시지역 전반부에서 상대적으로 높은 수심영역과 흐름의 지체현상이 발생하였으며, 홍수파의 원활한 전파에 큰 장애요소가 됨을 알 수 있었다. 두번째 수리모형실험에 대해서는 유입량의 증가에 따라 도시지역의 전반부에서 후반부로 전파될 때 수심은 급격히 감소하는 구간과 느리게 감소하는 구간으로 구별되며, 도시지역 전반부에 도달하는 홍수파의 최초시간은 유입량이 증가함에 따라 감소되는 경향을 나타내었다.

• 한국수산과학회지
• /
• 제22권6호
• /
• pp.415-423
• /
• 1990

In a laboratory model the response of the boundary layer flow over topography is studied in a rotating sliced cylinder by employing the source-sink analogy with Ekman layer dynamics. The boundary layer flow is produced by two different fluid. In the first experiment homogeneous fluid is used both for the source and the working fluid of the container. In the second experiment a denser fluid is used for the source with the same working fluid. For the homogeneous western boundary layer flow both the northward and the southward flow were affected by the topography(ridge) to produce a cyclonic motion near the ridge. When woughward moving heavy boundary flow of slower speed and the northward moving faster flow were present at the same time, the splitting of southward flow and the separating of the northward flow were observed with a cyclonic motion at the ridge. The most important factor that influence production of the cyclonic motion has been turned out to be the presence of the topography in the western boundary layer. In particular the role of the southward moving heavy flow over the interior flow pattern was found to be very significant.

• Asian-Australasian Journal of Animal Sciences
• /
• 제10권1호
• /
• pp.15-19
• /
• 1997

An experiment was conducted to clarify the effects of dietary supplementation of monensin or salinomycin on mineral utilization of growing goats. Six goats weighing 10.54 kg initially were randomly assigned to treatments in a replicated $3{\times}3$ Latin square design. Treatments were a basal diet, basal plus 30 ppm monensin and basal plus 20 ppm salinomycin on a DM basis. The basal diet was a mixture of Italian ryegrass wafer, soybean meal, ground maize and $CaCO_3$ with DM proportions of 50, 13.76, 36 and 0.24%, respectively. Each period lasted for 21 days, and the apparent absorption and retention of minerals were measured during the last 7 days of each period. Salinomycin supplementation improved NDF digestibility and plasma glucose. The apparent absorption and retention of Ca, P, Mg, Na and K were not influenced by the treatments. The concentrations of plasma Ca, P, Mg, Na, K and Cl were similar in all treatments. The ionophore supplementation had no significant effect on acid excretion. The results suggest that 30 ppm monensin or 20 ppm salinomycin supplementation is not effective in improving the utilization of Ca, P, Mg, Na and K in growing goats fed a diet composed of the 50% concentrate.

• 한국수정란이식학회지
• /
• 제27권3호
• /
• pp.171-174
• /
• 2012

Various small molecules can be used to control major signaling pathways to enhance stemness and inhibit differentiation in murine embryonic stem cell (mESC) culture. Small molecules inhibiting the fibroblast growth factor (FGF)/ERK pathway can preserve pluripotent cells from stimulation of differentiation. In this study, we aimed to evaluate the effect of pluripotin (SC-1), an inhibitor of the FGF/ERK pathway, on the colony formation of outgrowing presumptive mESCs. After plating the zona pellucida-free blastocyst on the feeder layer, attached cell clumps was cultured with SC-1 until the endpoint of the experiment at passage 10. In this experiment, when the number of colonies was counted at passage 3, SC-1-treated group showed 3.4 fold more mESC colonies when compared with control group. However, after passage 4, there was no stimulating effect of SC-1 on the colony formation. In conclusion, SC-1 treatment can be used to promote mESC generation by increasing the number of early mESC colonies.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권8호
• /
• pp.1989-2009
• /
• 2013

How to discover router vulnerabilities effectively and automatically is a critical problem to ensure network and information security. Previous research on router security is mostly about the technology of exploiting known flaws of routers. Fuzzing is a famous automated vulnerability finding technology; however, traditional Fuzzing tools are designed for testing network applications or other software. These tools are not or partly not suitable for testing routers. This paper designs a framework of discovering router protocol vulnerabilities, and proposes a mathematical model Two-stage Fuzzing Test Cases Generator(TFTCG) that improves previous methods to generate test cases. We have developed a tool called RPFuzzer based on TFTCG. RPFuzzer monitors routers by sending normal packets, keeping watch on CPU utilization and checking system logs, which can detect DoS, router reboot and so on. RPFuzzer' debugger based on modified Dynamips, which can record register values when an exception occurs. Finally, we experiment on the SNMP protocol, find 8 vulnerabilities, of which there are five unreleased vulnerabilities. The experiment has proved the effectiveness of RPFuzzer.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.844-849
• /
• 2008

In recent semiconductor manufacturing clean rooms, in order to improve clean room air quality, air washers are used to remove airborne gaseous contaminants such as $NH_3$, SOx and organic gases from outdoor air introduced into clean room. Meanwhile, there is a large quantity of exhaust air from clean room. From the energy saving point of view, heat recovery is useful for the reduction of air conditioning energy consumption for clean room. Therefore it is desirable to recover heat from the exhaust air and use it to reheat the outdoor air. However, so far there have not been sufficient studies of analyzing the comparison of the amounts of energy consumption and saving. In the present study, an experiment was conducted to investigate the energy consumption and heat recovery of a fin-coil type air washer system for semiconductor manufacturing clean rooms.