• Journal of Environmental Health Sciences
• /
• v.37 no.3
• /
• pp.201-208
• /
• 2011

Objective: Emissions of volatile organic compounds (VOCs) from municipal wastewater treatment plants and industrial wastewater are often overlooked as sources of exposure to toxic chemicals. VOCs from such sources evaporate readily into the air and may have significantly adverse impacts on public health. The present study aimed to establish the concentration of VOCs released from Jangrim-sinpyoeng Municipal and Industrial Wastewater Treatment plant (JWTP) in Busan, South Korea and assess the causes of the odor/stench in the surrounding residential facilities. Stench intensity, frequency and release time, and wind direction were also monitored. Methods: Onsite data were collected on a daily basis from a laboratory located on the JWTP premises through a period spanning 2006 to 2010. A second set of data was obtained in 2006 by conducting a questionnaire survey with 210 respondents living near JWTP. The experimental and survey data were analysed statistically using the SPSS package. Results: The survey results showed that people residing around JWTP strongly perceive a stench from the plant. The intensity of the stench was influenced significantly by wind direction and the location of the apartments facing the JWTP. Public participation formed a significant step in determining the quality of the study environment. Conclusion: Onsite data and survey data obtained in 2006 indicate that the nature of the odor experienced by residents is due to the intensity of total VOCs released by JWTP. However, additional research is needed to determine the effects of the VOC pollution on public health and quality of life.

• Journal of Environmental Health Sciences
• /
• v.44 no.1
• /
• pp.24-30
• /
• 2018

Objectives: Based on the amount of amalgam, the duration of exposure, and the water pH, this study aims to investigate the change patterns in the mercury concentrations in water after amalgams have been introduced into sewage water. It is expected that the study results will be useful in improving the system for regulating the amount of mercury that is introduced into the environment. Methods: During the study, a glass test-tube with a cap was washed and disinfected using the glass laboratory device washing method. Then, 1, 2, 3, and 4 tabs were placed into a 10 mL pH 4 solution and 10 mL pH 7 distilled water. Each specimen was prepared in duplicate. The mean of the two mercury concentrations was used as the representative value, and the mercury concentration was measured using a mercury measurement device (DMA-80, Milestone, Italy) a total of eight times at one-week intervals. Results: The results show that the lower was the pH, the higher was the amount of amalgam. Also the longer was the duration, the more significant was the increase of mercury concentration in the water. Conclusions: Dental clinics are collected separately from dental clinics that used them. Given this, dental clinics in Korea must have the necessary facilities to separately collect mercury at their level. In addition, proper disposal systems and social attention to the proper management of dental wastes are required to prevent environmental pollution from mercury.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.513-520
• /
• 2018

Since Paris Climate Change Conference in 2015, many policies to reduce the emission of greenhouse gas have been accelerating, which are mainly related to renewable energy resources and micro-grid. Presently, the technology development and demonstration projects are mostly focused on diversifying the power resources by adding wind turbine, photo-voltaic and battery storage system in the island-type small micro-grid. It is expected that the large-scaled micro-grid projects based on the regional district and town/complex city, e.g. the block type micro-grid project in Daegu national industrial complex will proceed in the near future. In this case, the economic cost or the carbon emission can be optimized by the efficient operation of energy mix and the appropriate construction of electric and heat supplying facilities such as cogeneration, renewable energy resources, BESS, thermal storage and the existing heat and electricity supplying networks. However, when planning a large residential town or city, the concrete plan of the energy infrastructure has not been established until the construction plan stage and provided by the individual energy suppliers of water, heat, electricity and gas. So, it is difficult to build the efficient energy portfolio considering the characteristics of town or city. This paper introduces an energy mix optimization(EMO) method to determine the optimal capacity of thermal and electric resources which can be applied in the design stage of the real large-scaled residential town or city, and examines the feasibility of the proposed method by applying the real heat and electricity demand data of large-scale residential towns with thousands of households and by comparing the result of HOMER simulation developed by National Renewable Energy Laboratory(NREL).

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.270-272
• /
• 2013

In order to protect coastal facilities mainly from wave and current actions, the self-locking bio blocks constituting component elements of protecting structures against scouring were designed. These blocks are adapted to the sloping bottom, coastal dunes, and submerged coastal base counteracting the destructive and erosive impulse action. A series of laboratory experiments is necessary to investigate the reflection of water waves over and against a train of protruded or submerged shore structures and compare the reflecting capabilities of incident waves including wave forces. In this study the hydraulic model experiment was conducted to identify the performance of newly designed water affinity bio blocks to keep the coast slope and bottom mound from scouring by reduction of the reflection coefficient and to convince stability of the placements. Revised design of each element of blocks were also tested for field conditions. From the result of experiment, the field applicability of the developed blocks and placement is to be discussed afterward.

• Journal of environmental and Sanitary engineering
• /
• v.4 no.2 s.7
• /
• pp.61-90
• /
• 1989

The purpose of this study was to identify and name clusters of school health program, and to describe some of the characteristics of administrative supports. The literature, materials and public documents were analysed by the chronological events from 1945 to 1989. The result of this study is as follows : 1. A brief summary of the history of school health program was included as an introduction to the analysis of the current programs of school health. Five current school health-program clusters were identified from findings of a study of programs ; 1) Physical assessment, laboratory examination and health services for the students, 2) health insturction 3) healthful living condition(environmental health), 4) health clinic management 5) administrative supports. 2. The earliest school-based efforts focused on communicable disease prevention by the ministry of health and social affairs. Annual medical inspection(health assessment) for school children for eyes, ears, nose, and throat were mandated nation-wide in 1951 by physical Assessment Act. 3. In 1979, the health instruction of schools to improve the health status of students was improved by health department in the Ministry of Education. 4. Experiences in healthful environment were basic components of the school health program. However, without careful planning and supervision these experiences were not contributed to the goal of school health. The formal program of school health environment were initiated in 1979. 5. In 1980, the guidelines of school health clinic management were prepared by Ministry of Education such as guidance of essential degrees and facilities in school health clinic. 6. Two patterns of administration of school health programs existed in Korea. In one the school health department operated its own health program and in the other the physical education department operated the health program within the school system. The school health department was established in Ministry of Education from 1979 to 1982. Improved school health programs will be a key element in the comprehensive national child health policy whic I will ask the Ministry of Education to develop for the Department.

• Pediatric Infection and Vaccine
• /
• v.22 no.3
• /
• pp.131-135
• /
• 2015

Since April 2012, more than 1,600 laboratory-confirmed human infections with Middle East Respiratory Syndrome Coronavirus (MERS-CoV) have been reported, occurring primarily in countries in the Arabian Peninsula; the majority in Saudi Arabia. The MERS outbreak in Korea, which began in May 2015 through the importation of a single case who had recently traveled to Bahrain, the United Arab Emirates, Saudi Arabia, and Qatar. As of November 28th, 186 secondary and tertiary cases had been reported; 38 deaths, mainly associated with underlying chronic illnesses, were reported. One case was exported to China and has been recorded as the first MERS case in China. Thirty-seven confirmed cases were associated with the index case, who was hospitalized from May 15 to May 17. Emergency room at one of the nation's largest hospitals had been affected by hospital-to-hospital and intra-hospital transmissions of MERS-CoV, resulting in an outbreak of 90 infected patients. The vast majority of 186 confirmed cases are linked to a single transmission chain associated with health facilities. The median age of patients is 55 years, with a range of 16 to 87 years. The majority (61%) of patients are men. Twenty-five (14%) of the cases involve healthcare workers. The overall median incubation period was six days, but it was four days for secondary cases and six days for tertiary cases. There has been no evidence of airborne transmission and sustained human-to-human transmission in communities. Intensified public health measures, including contact tracing, quarantine and isolation of all contacts and suspected cases, and infection prevention and control have brought the MERS-CoV under control in Korea. Since 4 July no new cases have been reported.

• Journal of Animal Science and Technology
• /
• v.62 no.6
• /
• pp.884-892
• /
• 2020

Corticosterone is known as a biological stress index in many species including birds. Feather corticosterone concentration (FCC) has increasingly been used as a measure for chronic stress status in broiler chickens. As sample preparation is the first step of analytical process, different techniques of feather matrix disruption need to be validated for obtaining better result in analysing corticosterone extraction. The current study was a validation of pulverizing the feather by bead beater (BB) and surgical scissors (SS) processing prior to corticosterone extraction in feather of broiler chickens. The type of feather processing prior to the hormone extraction may alter the final output. Thereby, finding a standard method according to laboratory facilities is pivotal. This study carried out to determine the effects of feather pulverization methods on the extraction amount of corticosterone in broiler chickens. Feathers were sampled from four weeks old Ross 308 broiler chickens (n = 12 birds). All broiler chickens were kept under the same environmental condition and had access to feed and water. Feather samples were assigned to one of the following processing methods 1) using a BB for pulverizing and 2) using a SS for chopping into tiny pieces. Each sample was duplicated into two wells during enzyme immunoassay (EIA) analysis to improve the accuracy of the obtained data. The results showed lower standard errors and constant output of FCC by using the BB method compared with the SS method. Overall comparison of FCC showed a significantly higher (p < 0.001) amount of the FCC in the BB compared with the SS. Overall, using the BB method is recommended over the SS method for feather processing due to the ability to homogenize a large number of samples simultaneously, ease of use and greater extraction of feather corticosterone.

• Korean Journal of Veterinary Service
• /
• v.44 no.1
• /
• pp.51-59
• /
• 2021

Various infectious diseases have threatened swine industries in Korea. One of the major risk factors of disease spread is livestock transport vehicle. For this reason, all abattoirs are required by law to have vehicle washing and disinfection facilities. However, detailed guidelines for cleaning and disinfection procedures were not provided. So in this study, assessment by visual observation was conducted to evaluate how well the cleaning and disinfection procedures of livestock transport vehicles have been performed in four different abattoirs in Jeonbuk, Korea. The observation included length of car washing time, the number of washing bay, type of washperson, type of disinfectant application, length of disinfection time, and compliance of driver's hygienic procedure. Every vehicle in all abattoirs conducted washing and disinfection procedure. However, there were procedural differences for each abattoirs and defects in the washing and disinfection procedures. In addition to that, the compliance of driver's hygienic procedure was not sufficient. Hence, detailed manuals on washing and disinfection procedures for involved people are required and it is necessary to establish an inspection and evaluation system.

• Advances in aircraft and spacecraft science
• /
• v.9 no.3
• /
• pp.195-215
• /
• 2022

The increasing interest in CubeSat platforms ant their capability of enlarging the frontier of possible missions impose technology improvements. Miniaturized electrical propulsion (EP) systems enable new mission for multi-unit CubeSats (6U+). While electric propulsion systems have achieved important level of knowledge at equipment level, the investigation of the mutual impact between EP system and CubeSat technology at system level can provide a decisive improvement for both the technologies. The interaction between CubeSat and EP system should be assessed in terms of electromagnetic emissions (both radiated and conducted), thermal gradients, high electrical power management, surface chemical deposition, and quick and reliable data exchanges. This paper shows how a versatile CubeSat Test Platform (CTP), together with standardized procedures and specialized facilities enable the acquisition fundamental and unprecedented information. Measurements can be taken both by specific ground support equipment placed inside the vacuum facility and by dedicated sensors and subsystems installed on the CTP, providing a completely new set of data never obtained before. CTP is constituted of a 6U primary structure hosting the EP system, representative CubeSat avionics and batteries. For the first test campaign, CTP hosts the ambipolar plasma propulsion system, called Regulus and developed by T4I. After the integration and the functional test in laboratory environment, CTP + Regulus performed a Test campaign in relevant environment in the vacuum chamber at CISAS, University of Padua. This paper is focused on the test campaign description and the main results achieved at different power levels for different duration of the firings.

• Biomedical Science Letters
• /
• v.28 no.4
• /
• pp.334-339
• /
• 2022

African swine fever virus (ASFV) is a highly contagious and lethal pathogen that poses a threat to the global pork industry. The World Organization for Animal Health (WOAH) has placed strict surveillance measures for ASFV. The possibility of long-term survival of ASFV in raw meat or undercooked pork has been reported. Accordingly, the problem of secondary infection in food waste from households or waste disposal facilities has emerged, raising the need for ASFV monitoring of food waste. However, most of the previously reported ASFV gene detection methods are focused on clinical monitoring of pigs. There are very few cases in which their application in waste has been verified. Since ASFV diagnosis requires rapid monitoring and immediate action, loop-mediated isothermal amplification (LAMP) may be suitable, but this requires conformity assessment for LAMP to be used as a diagnostic technique. In this study, six LAMP methods were evaluated, and two methods (kit and manual) were recommended for use in diagnosing ASFV in food waste.