• Korean Journal of Poultry Science
• /
• v.27 no.3
• /
• pp.227-233
• /
• 2000

Preset study was carried out to evaluate characteristics of lactic acid producing bacteria(LAB) in hen's cecum as probiotics value. Distribution of LAB in intestinal tracts was investigated using 5∼25 weeks - old hens. So, 12 strains to LAB with different morphology were isolated purely. Acid tolerance of LAB tested at pH 1, 2, 3, and 4, and bile resistant also tested at 0, 0.3% and 0.5% bile salt concentration. Growth pattern of LAB observed to 60h. All strains of cecal LAB couldn't survive at pH 1, and decreased linearly survival colony after incubation at pH 2 although some strains could survive for 2h. Most of LAB maintained constant number at pH 3 and 4. The bacterial action could increase linearly at 0% bile salt concentration in all of tested strains. However, only one strain could multiply at 0.3% bile salt, others were influenced by bile salt. That tendency was similar at 0.5% bile salt. Growth was peaked at 12 to 18 h after innoculation. After peak, the decreasing pattern of colony was different to strains which some strains decreased rapidly or maintained for long time. The LAB of hen's cecum was similar to intolerance acidity, but different to resistant to bile salt and growth pattern by strain. So, we choose three strains which have probiocs value, and identified as Lactobacillus amylovorus LLA7, Lactobacillus crispatus LLA9 and Lactobacillus vaginalis LLA11.

• Journal of Communications and Networks
• /
• v.12 no.5
• /
• pp.475-479
• /
• 2010

The clipping value, defined as the log-likelihood ratio (LLR) in the case wherein all the list of candidates have the same binary value, is investigated, and an effective method to estimate it is presented for iterative tree search detection. The basic principle behind the method is that the clipping value of a channel bit is equal to the LLR of the maximum probability of correct decision of the bit to the corresponding probability of erroneous decision. In conjunction with multilevel bit mappings, the clipping value can be calculated with the parameters of the number of transmit antennas, $N_t$; number of bits per constellation point, $M_c$; and variance of the channel noise, $\sigma^2$, per real dimension in the Rayleigh fading channel. Analyses and simulations show that the bit error performance of the proposed method is better than that of the conventional fixed-value method.

• Journal of Korean Society of Rural Planning
• /
• v.23 no.4
• /
• pp.61-74
• /
• 2017

In recent years, various policies have been conducted for the activation of the value chain for 6th industrialization of agriculture, which is aligned with creating job opportunities and start-up as well as value added enhancement. For this reason, this study seeks measures to kick-start application and development of a model to raise the success rate of startups and reduce the risk of market throughout surveying 168 6th industrialization management bodies about their start-up and business, and benchmarking of best practices, a case consistent with the value chain system of 6th industrialization of agriculture. Main findings are three-folds: First, it is necessary to raise the success rate of startups by means of the compatibility of the capital scale, low cost and life cycle of ideas. Second, the living lab for sharing ideas and collaboration is needed in the value chain system. Third, the living lab model is promoting rural community development and farm household income.

• Korean Chemical Engineering Research
• /
• v.47 no.5
• /
• pp.599-607
• /
• 2009

This study was conducted to derive the five correlations which could predict specific gravity(or heating value), compression factor, density, etc., if we know heating value or specific gravity only. To make a sufficient number of raw data for regression, SGERG EOS was modified into equation of heating value. Based on these raw data, five correlations were obtained and the uncertainties of the correlations were evaluated. The results showed that the uncertainties were near 0.1% in most conditions of natural gas and so the correlations could be used in natural gas industry and academic fields.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.2
• /
• pp.821-824
• /
• 2013

The aim of this study was to investigate the diagnostic value of superoxide dismutase (SOD) in tuberculous pleural effusions (TPEs) and malignant pleural effusions (MPEs). Pleural effusion (PE) samples from 100 patients were classified on the basis of diagnosis as TPE (n=57) and MPE (n=43). The activity of SOD was determined by pyrolgallol assay. A significant difference was observed in SOD activity (P<0.01) between TPE and MPE, levels of being significantly higher in TPE compared to MPE. With a threshold value of 41 U/L, the area under the ROC curve was 0.653, SOD had a sensitivity of 61.4% and a specificity of 61.0% for differential diagnosis. Thus, SOD activity in PE was not a good biomarker in differentiating TPE and MPE. To the best of our knowledge, five SOD isoforms may be present in PE. Identification of which SOD contributes to the difference of SOD level between TPE and MPE is very important for illustrating mechanisms and improving the differential diagnostic value.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1300-1302
• /
• 1998

Residual resistance ratio ( RRR ) of Cu/Nb-Ti Superconductor wire was evaluated by fixed point method. Our measured value of RRR showed good consistency with the average value obtained from round robin test conducted by IEC/TC 90. Our test results showed that the coefficient of variation ( COV ) was kept within 2 %

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.929-931
• /
• 2006

In this experiment, we have investigated that the transported space charge between sub-pixels in AC-plasma cell discharge. The test pulse 30 V, $5{\mu}s$ was applied to the address electrodes of neighbor cells of discharge occurred cells. And we have measured the transported space charge between sub-pixels in accordance with the various last sustain pulse widths t(time gap between the rising edges of sustain and test pulses) of 0.2 to $3{\mu}s$. It was observed that the peak value of transported space charge has been shown to be 21.5pC at $1.0{\mu}s$. And the IR peak value have been occured after $0.51{\mu}s$ with respect to sustain voltage.

• Journal of Dairy Science and Biotechnology
• /
• v.40 no.1
• /
• pp.23-34
• /
• 2022

In this study, to determine the importance of lactic acid bacteria (LAB) in Kombucha fermentation, biological functions, such as organic acid production and anti-inflammatory and antibacterial activities, of Kombucha, with or without LAB inoculation, were evaluated. Lactobacillus paracasei DK215, Saccharomyces cerevisiae C3, and Acetobacter pasteurianus P2 were selected as the inoculants. Organic acids were measured every 3 days from the end of fermentation using HPLC; the organic acid content of LAB-inoculated Kombucha was relatively high. Samples with or without LAB inoculation showed high antibacterial activity against Escherichia coli. The MTT assay results indicated no significant difference in concentration difference and cell death. In the NO production test, compared with the uninoculated Kombucha sample, the LAB-inoculated Kombucha sample exhibited a value similar to that of the group without LPS treatment. The levels of cytokine (IL-1α, IL-6, TNF-α) production were significantly lower than those of the LPS(+) group, indicating the anti-inflammatory activity potential of the Kombucha sample. This improvement in the biological function of the LAB-inoculated Kombucha further verifies the value of LAB in the fermented food and beverage industry.

• International Journal of Highway Engineering
• /
• v.20 no.1
• /
• pp.77-85
• /
• 2018

PURPOSES : The purpose of this study was to develop an urgent road-repair system and perform a field applicability test, as well as discover the optimum mix design for machine applications compared to the optimum mix design for lab applications. METHODS : According to reviews of the patent and developed equipment, self-propelled and mix-in-place equipment types are suitable for urgent pavement repair, e.g., potholes and cracks. The machine-application mix design was revised based on the optimum lab-test mix design, and the field application of a spray-injection system was performed on the job site. The mixture from the machine application and lab application was subjected to a wet-track abrasion test and a wheel-tracking test to calibrate the machine application. RESULTS and CONCLUSIONS : This study showed that the binder content could differ for the lab application and the machine application in the same setting. Based on the wet-track abrasion test result, the binder contents of the machine application exceeded the binder contents of the lab application by 1-1.5% on the same setting value. Moreover, the maximum dynamic stability value for the machine application showed 1% lower binder contents than the maximum lab-application value. Collectively, the results of the two different tests showed that the different sizes and operating methods of the machine and lab applications could affect the mix designs. Further studies will be performed to verify the bonding strength and monitor the field application.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.55 no.4
• /
• pp.202-206
• /
• 2006

In this paper, an auto detection method of stator winding fault of small induction motor is suggested. The Park's vector pattern which is obtained from 3-phase current signal by d-q transforming, is very good to detect winding fault. Comparing the Park's vector pattern of testing motor with its of healthy motor, the Park's vector pattern of fault motor is became an ellipse and the asymmetry is increased by the winding fault series. So for detecting the dis-symmetry, id-filtered function, Min-value, and Max-value are suggested for auto detecting. Using LabVIEW programing, 3-phase healthy motor and several kind of winding fault motors are tested and the test results are shown that the suggested method can gives us a possibility of an auto detecting winding fault.