• 한국전기전자재료학회논문지
• /
• 제16권8호
• /
• pp.681-687
• /
• 2003

The syntheses of LaNiO$_3$Perovskite crystalline phase from mixtures of La$_2$O$_3$and NiO via it mechanochemical(used planetary mill) and a wet ball mill process were investigated. A single and stable LaNiO$_3$perovskite crystalline phase was successfully prepared by using a heat free mechanochemical process which produced a fine amorphous powder, while that phase was not formed in a wet ball mill process which needed heat treatment ranging from 500 to 150$0^{\circ}C$ and produced a coarse powder. It was shown that the LaNiO$_3$ceramics made of the mechanochemically synthesized powder possesed a good metallic characteristic.

• 공업화학
• /
• 제30권6호
• /
• pp.757-761
• /
• 2019

고정층 상압 유통식 반응기를 사용하여 M(1)-Ni(5)/AlCeO₃ (M = La, Ce, Y) 촉매상에서 메탄의 부분 산화 반응을 수행하여 수소의 수율을 조사하였다. XRD 분석으로 반응 전과 반응 후의 환원된 La(1)-Ni(5)/AlCeO₃ 촉매의 결정상 특성피크를 조사하였고 FESEM과 EDS 분석으로 La, Ni, Ce 금속 입자가 촉매 표면상에 균일하게 분포하고 있음을 조사하였다. XPS 분석으로 촉매 표면상에 O^2-, O₂^2-의 산소와 Ce³⁺, Ce⁴+, La³⁺, Ni²⁺ 등의 이온이 존재함을 알 수 있었고, Ni(5)/AlCeO₃ 촉매에 1 wt%의 La를 첨가하면 Ni2p_3/2과 Ce3d_5/2의 원자가 각각 52.7과 6.3%로 증가하였다. La(1)-Ni(5)/AlCeO₃ 촉매상에서 수소의 수율은 89.1%이었으며, M(1)-Ni(5)/AlCeO₃ (M = Ce, Y)보다 매우 우수하였다. AlCeO₃이 산소와 반응하여 만들어진 CeO₂의 Ce⁴⁺ 이온이 La³⁺로 치환됨으로서 격자에 산소 빈자리를 만들고 strong metal-support interaction (SMSI) 효과로 Ni 원자의 분산을 증가시켜 수소 수율를 향상시켰다.

• 한국수소및신에너지학회논문집
• /
• 제32권1호
• /
• pp.41-52
• /
• 2021

NiO and Co3O4-doped porous La(CoNi)O3 perovskite oxides were prepared from excess Ni addition by a hydrothermal method using porous silica template, and characterized as bifunctional catalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) for Zn-air rechargeable batteries in alkaline solution. Excess Ni induced to form NiO and Co3O4 in La(CoNi)O3 particles. The NiO and Co3O4-doped porous La(CoNi)O3 showed high specific surface area, up to nine times of conventionally synthesized perovskite oxide, and abundant pore volume with similar structure. Extra added Ni was partially substituted for Co as B site of ABO3 perovskite structure and formed to NiO and Co3O4 which was highly dispersed in particles. Excess Ni in La(CoNi)O3 catalysts increased OER performance (259 mA/㎠ at 2.4 V) in alkaline solution, although the activities (211 mA/㎠ at 0.5 V) for ORR were not changed with the content of excess Ni. La(CoNi)O3 with excess Ni showed very stable cyclability and low capacity fading rate (0.38 & 0.07 ㎶/hour for ORR & OER) until 300 hours (~70 cycles) but more excess content of Ni in La(CoNi)O3 gave negative effect to cyclability.

• 한국수소및신에너지학회논문집
• /
• 제29권5호
• /
• pp.419-426
• /
• 2018

$Ni-La_2O_3-Ce_{0.8}Zr_{0.2}O_2$ catalysts with various $La_2O_3$ loading were investigated for hydrogen production from steam reforming of methane (SRM). The $La_2O_3$ loading influenced the physicochemical properties of $Ni-La_2O_3-Ce_{0.8}Zr_{0.2}O_2$ catalysts such as BET surface area, Ni dispersion, Ni size and reducibility. Among the prepared catalysts, $Ni-70La_2O_3-Ce_{0.8}Zr_{0.2}O_2$ catalyst showed the highest activity and stability at a very high gas hourly space velocity (GHSV) of $932,556h^{-1}$. This is mainly due to high Ni dispersion, small Ni size and high reducibility.

• Korean Chemical Engineering Research
• /
• 제53권2호
• /
• pp.145-149
• /
• 2015

LiCl 용융염에서 희토류 금속을 포함한 $Nd_2O_3-La_2O_3-NiO$ 복합산화물의 전해환원을 통한 $La_{0.5}Nd_{0.5}Ni_5$ 합금제조에 대한 연구를 수행하였다. $Nd_2O_3-La_2O_3-NiO$ 복합산화물은 $1100^{\circ}C$에서 소결시에 $NiNd_2O_4$ (스피넬)과 $LaNiO_3$ (페로브스카이트) 구조가 생성되었다. 스피넬 및 페로브스카이트 구조는 복합산화물의 전해환원 반응속도를 증가시켰다. LiCl 용융염에서 전해환원 반응 동안 $Nd_2O_3-La_2O_3-NiO$ 복합산화물은 Ni, $NiLa_2O_4$ 등의 다양한 중간생성물을 거쳐 $La_{0.5}Nd_{0.5}Ni_5$ 합금으로 환원됨을 확인할 수 있었다. XRD 분석결과를 통해 최종 생성물인 $La_{0.5}Nd_{0.5}Ni_5$의 생성 메카니즘을 제시하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.406-409
• /
• 2001

The conductivity properties and synthesis of $LaNiO_{3}$ ceramics from $La_{1+\delta}NiO_{3}(\delta=-0.06,0,0.06)$ were investigated. A single perovskite phase was realized at $800^{\circ}C$. $La_{2}NiO_{4}$ and other unexpected oxide were observed at $1000^{\circ}C$. The Microstructure was showed clearly that it is a low density porous material. $LaNiO_3$ ceramic showed a metallic conductivity. The conductivity of La rich samples had a higher value than the La poor samples.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.406-409
• /
• 2001

The conductivity properties and synthesis of LaNiO$_3$ ceramics from La$\sub$1+$\delta$/NiO$_3$($\delta$=--0.06, 0, 0.06) were investigated. A single perovskite phase was realized at 800$^{\circ}C$. La$_2$NiO$_4$ and other unexpected oxide were observed at 1000$^{\circ}C$. The Microstructure was showed clearly that it is a low density porous material. LaNiO$_3$ ceramic showed a metallic conductivity. The conductivity of La rich samples had a higher value than the La poor samples.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계합동학술대회 논문집
• /
• pp.218-223
• /
• 2002

Low temperature synthesis of $LaNiO_3$ crystalline phase composited from mixtures of $La_2O_3$ and NiO via the ball mill and mechanochemical process were investigated. By the ball mill, 20% of $LaNiO_3$ crystalline phase was formed in the samples sintered at $900^{\circ}C$ due to the lack of reactivity of NiO. However, the mechanochemical process yielded about 93% of $LaNiO_3$ crystalline phase in room temperature.

• 청정기술
• /
• 제5권2호
• /
• pp.63-68
• /
• 1999

The activities of Ni(20wt%)/$La_2O_3$, Ni(20wt%)/${\gamma}-Al_2O_3$, and Ni(20wt%)/$SiO_2$ catalyst for $CO_2$ reforming of $CH_4$ were investigated in a fixed bed flow reactor under atmospheric condition. Catalyst characterization using XRD, TEM, SEM, BET analysis were also conducted. The catalytic activity of Ni(20wt%)/$La_2O_3$ catalyst has relatively superior to that of Ni(20wt%)/${\gamma}-Al_2O_3$ and Ni(20wt%)/$SiO_2$ catalyst. The good activity of Ni(20wt%)/$La_2O_3$ catalyst seems to depend on reduced $Ni^{\circ}$ phases of NiO($\rightarrow$ Ni + O), $LaNiO_3$($\rightarrow$ $Ni+La_2O_3$), Ni crystalline phases, and decoration of Ni phases by lanthanum species is also an important factor. Ni(20wt%)/${\gamma}-Al_2O_3$ and Ni(20wt%)/$SiO_2$ catalyst due to surface acidity resulted in the deposition of wisker type and encapsulate carbon on the surface of catalyst, but Ni(20wt%)/$La_2O_3$ catalyst did not show carbon on the surface of catalyst up to 8.5hr reaction.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.621-624
• /
• 2002

Lanthanum nickel oxide$(LaNiO_3)$ powders have been prepared via a mechanochemical processing without any additional heat treatment. When a mixed lanthanum and nickel oxide was mechanically activated for 6 hours with 450 rpm, a stable and single phase perovskite powder was successfully synthesized and its crystallite size of about 90 nm is calculated by using the Scherrer equation.