• 한국세라믹학회지
• /
• 제44권5호
• /
• pp.148-150
• /
• 2007

A process to synthesize $La_{0.8}Sr_{0.2}CrO_3$ (LSC), which is a promising material for use as a separator in a soild oxide fuel cell, is investigated in this study. LSC powders without secondary Phases could be synthesized with ultrasonic spray pyrolysis and a heat treatment at $1200^{\circ}C$ for 20 h; however, it showed an average diameter of $0.6{\mu}m$ with a wide particle size distribution. On the other hand, LSC powders synthesized with spray pyrolysis at $800^{\circ}C$, heat-treated at $900^{\circ}C$ for 5 h, ball-milled and finally heat-treated again at $1200^{\circ}C$ for 20 h showed a smaller average diameter of $0.3{\mu}m$ and narrower size distribution. Very few particles above $0.5{\mu}m$ were found. Thus, a proper combination of the heat treatment and milling process after spray pyrolysis it determined to be very important in synthesizing fine and uniform LSC perovskite powders.

• 한국전기전자재료학회논문지
• /
• 제25권5호
• /
• pp.392-397
• /
• 2012

In the $(La_{0.8}Ca_{0.2})(Cr_{0.9}Co_{0.1})O_3$ (LCCC), which has been using as interconnector materials in SOFC, Al ions were substituted for Co because ionic radius of Al is similar to that of Co. Because of the almost identical ionic radius of Al and Co, the substitution was not thought to be affect the tolerance factor of LCCC, and the densification behavior, high temperature electrical conductivity and thermal expansion coefficient were examined as a function of Al concentration. In the cases of the x= 0 and x= 0.02 in $(La_{0.8}Ca_{0.2})(Cr_{0.9}Co_{0.1-x}Al_x)O_3$ (x= 0~0.1), the samples showed the relative densities above ${\geq}95%$ when those were sintered at ${\geq}1,350^{\circ}C$. In the case of the $x{\geq}0.06$ the sintered density deteriorated greatly at lower sintering temperatures. High temperature electrical conductivity of the samples decreased as the content of Al increased. Since the valence state of Al ion is unchangeable, while Cr or Co ions contribute to the electrical conduction by changing those valence states, Al substitution resulted in the decreased electrical conductivity. Al doping of LCCC was an effective way of decreasing the thermal expansion coefficient (TEC).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.909-912
• /
• 2001

Lanthanide orthochromite materials have been widely studied as refractory conducting ceramics because of their electrical conductivity, oxidation resistance and high melting points. In this paper theoretical and experimental analysis about electric conductivity of the SHS prepared ceramics was carried out. The usefulness of the Seebeck-coefficient measurements as a function of P(O$_2$) is emphasized. Electronic conduction was found to be n-type in the lower P(O$_2$) range, and p-type in the higher P(O$_2$) range. The carrier concentrations were calculated as a function of P(O$_2$) and defect structure.

• 한국전기전자재료학회논문지
• /
• 제19권12호
• /
• pp.1085-1091
• /
• 2006

The microstructure, electrical properties, and its stability of (Pr, Co, Cr, La)-doped ZnO varistors were investigated at different sintering temperatures in the range of $1230{\sim}1300^{\circ}C$. As the sintering temperature increased, the sintered density increased from 5.50 to $5.77g/cm^3$, the varistor voltage decreased from 777.9 to 108.0 V/mm, the nonlinear coefficient decreased from 77.0 to 7.1, and the leakage current increased from $0.4{\mu}A\;to\;50.6{\mu}A$. On the other hand, the donor concentration increased from $0.90{\times}10^{18}\;to\;2.59{\times}10^{18}/cm^3$ and the barrier height decreased from 1.89 to 0.69 eV with increasing temperature. The stability of nonlinear electrical properties was obtained from sintering temperature of $1260^{\circ}C$. The varistors sintered at $1260^{\circ}C$ marked the high electrical stability, with $%{\Delta}V_{1mA}=+1.9%,\;%{\Delta}a=10.6%,\;and\;%{\Delta}I_L=+20%$ for DC accelerated aging stress state of $0.95V_{1mA}/150^{\circ}C/24h$.

• Korean Chemical Engineering Research
• /
• 제49권2호
• /
• pp.168-174
• /
• 2011

La을 기반으로 하는 다양한 페롭스카이트 촉매를 페치니(Pechini)법에 따라 제조하고, 이 촉매를 음식물 처리 과정에서 발생하는 악취 성분의 저온 산화 반응에 적용하여 효과적인 탈취가 이루어지도록 하였다. 배출 가스의 정량 및 정성 분석을 통하여 음식물 처리 시간에 따른 주요 악취 성분의 양을 조사하였다. 그리고 주요 악취 성분들로 구성된 표준 악취 시료는 산화 반응기의 반응물로 도입하였다. 먼저, 다양한 전이 금속 M이 치환된 La 기반 페롭스카이트 촉매($LaMO_{3}$: M=Cr, Mn, Fe, Co 및 Ni)를 제조하고 전이 금속 M의 영향을 알아보기 위해 악취 성분의 산화 반응에 적용한 결과, 테스트한 촉매 중에서 $LaNiO_3$ 촉매가 가장 우수한 촉매 활성을 보였다. 또한 촉매 활성을 증진시키기 위하여 Pt가 치환된 페롭스카이트 촉매($LaNi_{1-x}Pt_{x}O_{3}$: x=0, 0.03, 0.1 및 0.3)를 제조하였고, 이로부터 $LaNi_{0.9}Pt_{0.1}O_{3}$ 촉매가 가장 효율적인 촉매인 것을 알 수 있었다. 끝으로 저온 산화 반응에서의 페롭스카이트 촉매의 활성을 극대화하기 위하여 담지된 페롭스카이트 촉매($XLaNi_{0.9}Pt_{0.1}O_{3}/Al_{2}O_{3}$: X=페롭스카이트 함량(wt%), 0, 10, 20, 30, 40, 50 및 100)를 적용하였다. $XLaNi_{0.9}Pt_{0.1}O_{3}/Al_{2}O_{3}$ 촉매의 활성은 페롭스카이트 함량에 따라 화산형(Volcano-shaped) 곡선을 나타내었으며, 이 때 $20LaNi_{0.9}Pt_{0.1}O_{3}/Al_{2}O_{3}$ 촉매가 $180^{\circ}C$의 반응 온도에서 88.7%의 가장 높은 전환율을 보였다.

• Transactions on Electrical and Electronic Materials
• /
• 제14권4호
• /
• pp.193-198
• /
• 2013

The effects of additives (Cr, Nb, Dy, and Bi) on microstructure, electrical properties, dielectric characteristics, and aging behavior of $ZnO-V_2O_5-MnO_2-Co_3O_4-La_2O_3$ (ZVMCL) ceramics were systematically investigated. The phase formed in common for all ZVMCL ceramics modified with various additives consisted of ZnO grain as a main phase, and $Zn_3(VO_4)_2$ and $ZnV_2O_4$ as the secondary phases. The sintered density and average grain size were in the range of $5.4-5.54g/cm^3$ and $3.7-5.1{\mu}m$, respectively. The ZVMCL ceramics modified with Cr exhibited the highest breakdown field (6,386 V/cm) and the ZVMCL ceramics modified with Nb exhibited the lowest breakdown field (3,517 V/cm). All additives enhanced the nonlinear coefficient (${\alpha}$), by a small or large margin, in particular, additives such as Bi and Nb noticeably increased the nonlinear coefficient, with ${\alpha}=25.5$ and ${\alpha}=23$, respectively. However, on the whole, all additives did not improve the stability against a DC stress, compared with ZVMCL ceramics.

• Transactions on Electrical and Electronic Materials
• /
• 제15권5호
• /
• pp.284-289
• /
• 2014

The effects of additives (Nb, Bi and Cr) on the microstructure, varistor properties, and aging behavior of V/Mn/Co/ La/Dy co-doped zinc oxide ceramics were systematically investigated. An analysis of the microstructure showed that all of the ceramics that were modified with various additives were composed of zinc oxide grain as the main phase, and secondary phases such as $Zn_3(VO_4)_2$, $ZnV_2O_4$, and $DyVO_4$. The $Bi_2O_3$-modified samples exhibited the lowest density, the $Nb_2O_5$-modified sample exhibited the largest average grain size, and the $Cr_2O_3$-modified samples exhibited the highest breakdown field. All additives improved the non-ohmic coefficient (${\alpha}$) by either a small or a large margin, and in particular an $Nb_2O_5$ additive noticeably increased the non-ohmic coefficient to be as large as 36. The $Bi_2O_3$-modified samples exhibited the highest stability with variation rates for the breakdown field and for the non-ohmic coefficient (${\alpha}$) of -1.2% and -26.3%, respectively, after application of a DC accelerated aging stress of 0.85 EB/$85^{\circ}C$/24 h.

• 공업화학
• /
• 제17권5호
• /
• pp.483-489
• /
• 2006

희토류 화합물인 $La_{2}O_{3}$ 및 $CeO_{2}$ 시약과 이들을 함유하는 희토류 광석을 이용하여 제철 폐수 중의 불소 및 유해 중금속 제거에 대하여 연구하였다. 용액 중 불소에 대한 희토류 원소의 제거 반응기구는 $La^{3+}$ 및 $Ce^{4+}$ 등의 양이온이 불소 이온과 불용성 화합물을 형성하는 것으로 알려져 있다. 기존의 불소 제거에 사용되고 있는 소석회와 비교한 결과 $La_{2}O_{3}$ 및 $CeO_{2}$ 의 불소제거 효율이 높았다. HF 용액에서의 제거 효율은 $CeO_{2}$ 광석 < $CeO_{2}$ 시약 < $Ca(OH)_{2}$ < $La_{2}O_{3}$ 광석 < $La_{2}O_{3}$ 시약의 순서였고, 제철 폐수에서는 $Ca(OH)_{2}$ < $CeO_{2}$ 광석 < $CeO_{2}$ 시약 < $La_{2}O_{3}$ 광석 < $La_{2}O_{3}$ 시약의 순서였다(pH의 영향은 소석회인 경우 pH가 증가할수록 불소제거율이 감소하였다. 세륨화합물과 란탄화합물인 경우는 pH 증가에도 불구하고 불소제거 효율이 증가하는 경향을 보였으나 방류 시 수질조건과 불소제거율을 함께 고려할 때 용액의 적정 pH는 7이 적당하다고 판단된다). 망간제거의 경우, pH 7 이하에서는 소석회가 희토류 화합물보다 우수한 망간제거율을 보였고 pH 10에서는 모든 처리제에 대해서 거의 완벽한 제거특성을 보였다. 총크롬 제거의 경우는 산성 조건에서는 란탄화합물이 가장 높은 불소 제거율을 보였으며 pH 7이상에서는 모든 처리제가 좋은 효율을 보였다.

• 대한화학회지
• /
• 제59권6호
• /
• pp.493-498
• /
• 2015

The reductive amination of cyclohexanone with ammonia over Cu-Cr-a/γ-Al₂O₃ was investigated. It was found that a proper solvent with high solubility of ammonia and 4Å molecular sieves for the elimination of generated water contributed to the formation of cyclohexylamine in the premixing process. In addition, the addition of ammonia in the fixedbed reactor could obviously improve the conversion of cyclohexanone to cyclohexylamine. Finally, reaction conditions including reaction temperature, hydrogen pressure and charging rate of the premix were optimized. Under the optimized conditions, cyclohexylamine was obtained in 83.06% yield.

• 한국세라믹학회지
• /
• 제48권3호
• /
• pp.246-250
• /
• 2011

Effects on sintering and electrical properties of $La_{0.7}Ca_{0.3}Cr_{0.9}Co_{0.1}O_{3-{\delta}}$ system, a interconnect material for cylindrical and flat tubular solid oxide fuel cells (SOFC), have been investigated by Ca-source when using $CaCO_3$ and $CaF_2$. When using $CaCO_3$ and $CaF_2$ was mixing as Ca-source, single phased perovskite solid solution was observed for each sample. The sintering temperature was decreased by $CaF_2$ contents was increased. When using 0.1 mole $CaF_2$ was densely sintered at $1400^{\circ}C$ and relative density was 93.8%. Also, electrical conductivity in oxidation and reducing atmosphere was 47, 4.3 S/cm, respectively, due to $F^-$ ion enhance the electrical conductivity in reducing atmosphere.