• 한국구조물진단유지관리공학회 논문집
• /
• 제13권1호통권53호
• /
• pp.88-96
• /
• 2009

본 연구에서는 FBG 센서 및 PDA를 이용하여 새로운 안전관리 시스템인 무선 계측 시스템을 개발하기 위해 FBG 센서를 이용하여 광섬유 변위(FBG-LVDT) 센서, 광섬유 변형률(FBG-STRAIN) 센서, 광섬유 온도(FBG-TEMP) 센서 그리고 광섬유 가속도(FBG-ACC) 센서를 특별 제작하였다. 또한, 신호처리 시스템에는 적용된 FBG 센서들의 무선송신 시스템이 가능하도록 신호처리 시스템을 구성하였으며, PDA를 이용하여 원격 거리에서도 display가 가능할 수 있도록 프로그램을 개발하였다. 개발된 FBG 센서들과 무선계측 모니터링 시스템의 현장 적용성, 정확성 및 활용 가능성을 검증하고자 현장 교량에서 정적, 동적 재하시험을 실시하였다. 또한, FBG-LVDT 센서, FBG-ACC 센서에 의하여 측정된 동적 데이터들은 Meister의 진동등감각 곡선에 적용시킴으로서 교량의 진동에 대한 사용성 평가를 실시하였고 교량의 진동 사용성을 고려하여 진동 제한 기준을 제시하여 대상 교량의 진동 평가를 위한 방법을 마련하였다.

• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.151-159
• /
• 2015

In this study, we developed an automated contact-type thickness measurement machine that continuously and precisely measures the thickness of a PCB module product using multi-LVDT sensors. The system contains a measurement part to automatically measure the thickness in real time according to the set conditions with an alignment supply unit and unloading unit to separate OK and NG products. The sensors were calibrated before assembly in the measuring machine, and precision and accuracy performance tests were also performed to reduce uncertainty errors in the measurement machine. In the calibration test, the precision errors of the LVDT sensor were determined to be $1-3{\mu}m$ as 0.1% at the measuring range. A measurement error of 0.8 mm and 1.0 mm thickness test standards were found to be $1{\mu}m$ and $4{\mu}m$, and the standard deviations of two 1.0 mm products were measured as $14{\mu}m$ and $8{\mu}m$, respectively. In the measurement system analysis, the accuracies of test PCB standards were found to be $2{\mu}m$ and $3{\mu}m$, respectively. From the results of gage repeatability and reproducibility (R & R) crossed, we found that the machine is suitable for the measurement and process control in the mass production line as 7.92% of total gage R & R and in seven distinct categories. The maximum operating speed was limited at 13 pcs/min, showing a value good enough to measure.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권6호
• /
• pp.829-834
• /
• 2011

본 논문에서는 대형 선박용 디젤 엔진의 실린더 라이너의 마모량을 측정하는 새로운 시스템의 개발에 관하여 소개한다. 제안된 시스템은 LVDT, 온도센서, 실린더 내부의 밝기조절용 LED 및 카메라가 각각 1개씩 부착된 측정부, 계측명령전달 및 측정데이터 모니터링을 담당하는 컴퓨터기반 모니터링부, 측정부의 제어 및 측정데이터의 모니터링부로의 전송을 담당하는 주 제어부로 구성된다. 개발된 시스템의 정도는 1/100 mm 의 측정정도를 갖는 내경게이지의 것과 비교되어진다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권3호
• /
• pp.11-22
• /
• 2012

본 연구는 RTK-GPS (Real Time Kinematic-Global Positioning System) 측위법을 이용한 변위 계측 결과, 가속도계를 이용한 변위계측 결과, 그리고 LVDT(Linear variable differential transformer)의 변위계측 결과를 비교하여 RTK-GPS와 가속도계 센서를 구조물에 적용할 때의 문제점들을 파악하였다. 또한, 관측빈도와 측위 정확도를 향상시킨 RTK-GPS와 가속도계를 이용한 변위계측 결과를 통합 계산하여 절대변위인 LVDT와 비교를 통해 생성된 통합 변위의 정확도와 타당성을 확인하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.509-512
• /
• 2015

본 논문에서는 유압 실린더내의 피스톤 위치를 측정하기 위한 정전용량 센서(Capacitive Sensor) 구조를 연구하였다. 기존에 유압 실린더 내 피스톤 위치 측정을 위해 인덕티브(Inductive) 방식을 응용한 LVDT(Linear Variable Differential Transformer) 센서가 사용되고 있으며, 높은 정확도를 갖지만, 고가이며 구조적으로 복잡하다는 단점이 있다. 본 논문에서는 이러한 단점을 극복하기 위한 방법으로 유압실린더 내 최적화된 구조를 바탕으로 여러 가지 비접촉 정전용량 센서 구조 방식을 연구하였다. 실험을 통하여 본 논문의 제안구조를 사용하면 유압 실린더 내 피스톤 위치측정이 가능함을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1198-1205
• /
• 2003

Most domestic fossil power plant have exceeded 100,000 hours of operation with the severe operating condition. Among the critical components of fossil power plant, high temperature steam pipe system have had a many problems and damage from unstable displacement behavior because of frequent start up and shut down. In order to prevent the serious damage and failure of the critical pipe system in fossil power plant, 3-dimensional displacement measurement system were developed for the on-line monitoring system. 3-D Measurement system was developed with using the LVDT type sensor and rotary encoder type sensor, this system was installed and operated on the real power plant successfully. In the future time, network system of on-line diagnosis for critical pipe will be designed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.291-292
• /
• 2006

Currently A demand of high precision workpiece is increasing in industry. At present, roundness measuring machine using Air bearing, coordinate measuring machine that are used from measurement station. but these machines will not be able to apply to In-line process. because of like these machine's price are very expensive and measurement time is long. also, the complexity of conventional roundness measurement method based on fourier transform, it makes difficult to development analysis program. This work present new architecture of a Out-diameter measuring system fur analysis of roundness of product. In this system, the influence of table motion errors is minimize by using two LVDT sensor and knife edge contact tip. We are produce a test machine and make an experimenter on Out-diameter of test bearing. The measurement result compared with roundness measuring machine.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.483-488
• /
• 2003

Calibration and gauge factor readjustment process made for the health monitoring system installed in the railway bridges is reviewed and some findings are explained in this study: specifically, the calibrators made for this purpose are illustrated and the regression processes of the calibration on long-term displacement using water level sensor, longitudinal displacement using LVDT sensor, instantaneous displacement using LVDT sensors and accelerometer are described in details. Based on the regression results, new gauge factors are obtained from regression equation and another verification is made by performing another calibration again with new factors. From the second calibration, it was found that the suggested regression curves and their factors are appropriate and much better results are expected. Future work will be concentrated on the long-term analysis of the measurement data and on the database structures so that the assessment of the structure such as damage detection and remaining life estimation is possible.

• 한국철도학회논문집
• /
• 제5권3호
• /
• pp.148-157
• /
• 2002

A health monitoring system becomes a useful tool to obtain information on long term behavior of the important railway structures such as very long span and special type bridges. The health monitoring system not only gives the direct measurement data of the railway bridges but also provides the basic data on the maintenance of the structures. Therefore, periodic calibrations of the health monitoring system will be a necessary step toward precise and accurate assessment of the railway bridges. In this study, the calibration and gauge factor readjustment process made for the health monitoring system installed in the railroad bridges is reviewed and some findings are explained in detail: specifically, the calibrators made for this purpose are illustrated and the regression processes of the calibration on long-term displacement using water level sensor, longitudinal displacement using LVDT sensor, instantaneous displacement using LVDT sensors and accelerometer are described in full length. Based on the regression results, it was found that the gauge factors need to be readjusted according to the regression equation but, since the deviation or shift is not serious so far, long-term observation on each sensor is also recommended. Future work will be concentrated on the long-term analysis of each sensor and on the database creation so that the assessment of the structures is possible.

• 대한의용생체공학회:의공학회지
• /
• 제32권2호
• /
• pp.177-184
• /
• 2011

In this study, the system for application of the bone stimulation was implemented using high frequency and low strain method. The whole system consists of the high frequency and low strain vibration stimulation system 177 for stimulating bone, LVDT sensor, and wireless sensor based on tri-axial accelerometer. To evaluate the usefulness of the system, the frequencies and accelerations from function generator were applied to the vibration stimulation system. The range of frequency was 17 Hz, 30 Hz, 45 Hz, 50 Hz and the range of acceleration was set 0.3 g, 0.6 g, 1g, and 2 g. The measured frequencies and acceleration using LVDT (linear variable difference transformer) sensor and 3-axial accelerometer were estimated and compared. The range of frequencies average difference was from 0.0 to 0.004 Hz. As the standard deviation of frequencies estimated by LVDT sensor and accelerometer was below 0.03 Hz and the output frequencies of function generator were similar: Also the results of t-test were satisfied with conditions of p > 0.05. And the acquired frequencies and acceleration from vibration measuring device module were estimated and analyzed. As the mean of accelerations was similar to the acceleration applied from function generator. And the standard deviation of acceleration estimated from vibration measuring device module was ranged from 0.019 g to 0.038 g. Also the results of t-test were satisfied with conditions of p > 0.05. Therefore, these results were airy similar to the acceleration applied from function generator. As a result, the usefulness of the system was confirmed. n a further study, clinical experiment will be carried out with the authorization of IRB (institutional review board) so that appropriate frequency and strain would be investigated in clinical field.