• 한국세라믹학회지
• /
• 제43권2호
• /
• pp.92-97
• /
• 2006

Dolomite type $BaSn(BO_3)_2$ ceramics with rhombohedral crystal structure has been synthesized via solid state reaction route. Dielectric properties were measured for the samples sintered at $1050\~1200^{\circ}C$ for 2 h in air. Dielectric constant, loss tangent, and temperature coefficient were increased with sintering temperature due to the evolution of $BaSnO_3$, secondary, phase. Optimum dielectric properties were obtained at the $BaSn(BO_3)_2$ ceramics sintered at $1100^{\circ}C.\;CuO/Bi_2O_3$ was added to $BaSn(BO_3)_2$ ceramics to lower the sintering temperature for LTCC application, then Co and Fe-based coloring agents were added for colorizing the LTCC tape. Typical dielectric properties of $BaSn(BO_3)_2$ ceramics with $5 wt\%\;CuO/Bi_2O_3\;and\;3wt\%$ Co-coloring agent that sintered at $900^{\circ}C$ were $\varepsilon_r=9.89,\;tan{\delta}=0.92\times10^{-3},\;and\;TCC=112ppm/^{\circ}C$. Thus obtained LTCC tape was co-fired with Ag paste for compatibility test and revealed no sign of Ag reaction with the ceramics.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2007년도 추계학술발표대회 및
• /
• pp.86.2-86.2
• /
• 2007

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권10호
• /
• pp.534-539
• /
• 2006

An integrated inductor using the low-temperature co-fired ceramics(LTCC) technology for low-power electronics was fabricated. In the inductor NiZn ferrite sheet$({\mu}_r=230)$, was embedded to increase inductance. The inductor has Ag spiral coil with 14 turns$(7turns{\times}2layers)$, a dimension of 0.6mm in width, 10um in thickness, and 0.15mm pitch. To evaluate the inductance, including the parasitic resistance, the fabricated inductor was calculated and measured. It was confirmed that calculated values were very close to the measured values. Finally as an application of the LTCC integrated inductor to low power electronic circuits, a LTCC boost DC/DC converter with 1W output power and up to 0.5MHz switching frequency using the inductor fabricated was developed.

• 마이크로전자및패키징학회지
• /
• 제7권1호
• /
• pp.13-18
• /
• 2000

금속기판 위에 결합된 저온 소성 세라믹(low temperature co-fired ceramics on metal, LTCC- M)은 소성 후에 x-, y- 방향으로의 수축을 1% 이하로 억제할 수 있어 수동 소자를 내장하는데 매우 유리하며, 금속 기판 전체를 접지로 사용함으로써 노이즈를 감소시킬 수 있다. 본 고에서는 내부 실장 수동 소자별 특성차에 대하여 소개하고, 이러한 내부 실장 소자를 이용하여 실제로 제작된 PAM(power amplifier module)을 소개하였다. 내장된 수동 소자는 테스트 패턴 상에서 10~20%의 변화값을 보였으며 실제 모듈에 적용하여도 목표치에 부합하는 소자 구성이 가능하였다. 수동 소자가 내부에 실장됨으로써 신호 처리 시간을 감소시킬 수 있고, 납점의 감소로 공정을 단순화시킬 수 있을 뿐만 아니라 신뢰성 또한 증가시킬 수 있으므로 향후 RF모듈 외에 파워 및 고기능 소자 등 다양한 분야에 응용이 가능할 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.939-940
• /
• 2006

An integrated inductor using the low-temperature co-fired ceramics(LTCC ) technology for low-power electronics was fabricated. In the inductor NiZn ferrite sheet(${\mu}_r=230$), was embedded to increase inductance. The inductor has Ag spiral coil with 14 turns($7turns{\times}2layers$), a dimension of 0.6mm in width, 10um in thickness, and 0.15mm pitch. To evaluate the inductance, including the parasitic resistance, the fabricated inductor was calculated and measured. It was confirmed that calculated values were very close to the measured values. Finally as an application of the LTCC integrated inductor to low power electronic circuits, a LTCC buck DC/DC converter with 1W output power and up to 0.5MHz switching frequency using the inductor fabricated was develop.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.611-615
• /
• 2003

The crystalline and dielectric properties on $Al_2O_3$ filled glass frit ($CaO-Al_2O_3-SiO_2-MgO-B_2O_3$) with admixtures of $TiO_2$ have been investigated. The dielectric constant value of $7.5{\sim}7.8$, quality factor value of 700 were obtained for glass frit : $Al_2O_3$ (50 : 50 wt%) ceramics. As the amount of $TiO_2$ increased, temperature coefficient of dielectric constant were decreased.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.760-763
• /
• 2003

Low Temperature Cofired Ceramics (LTCC) technology is a promising technology to integrate many devices in a module by embedding passive components. For the module substrate, most LTCC structures have dielectric constants below 10 to reduce signal delay time. Some components, which need high dielectric constants, have not been yet embedded in LTCC module. So, embedding capacitor with high capacitance by applying another dielectrics with high dielectric constants in LTCC is an important issue to maximize circuit density in LTCC module. In this study, electrical properties of embedded capacitor fabricated by dielectric paste of high dielectric constants (K-100) and co-firing behavior with LTCC were investigated. To prevent camber development of co-fired structure, constrained sintering process was tested. Dielectric properties of embedded capacitors were calculated from their capacitance and impedance value. Temperature coefficient of capacitance were also measured.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.322-322
• /
• 2008

Low-temperature co-fired ceramics (LTCC) have turned out to be very promising technology in accordance with the rapid developments in semiconductor technology. The demands for compact electrical assemblies, smaller power loss as well as high signal density can be fulfilled by LTCC. And for the multi-layered ceramic devices with embedded passive components such as high dielectric constant decoupling capacitor, LTCC materials require the several conditions to avoid delamination and internal cracks. For the present study, diopside-based glass is chosen as the LTCC substrate material in view of its high coefficient of thermal expansion (CTE). From the experimental resultsn the influence of each element on the CTE change can be revealed.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 춘계 기술심포지움 논문집
• /
• pp.130-133
• /
• 2002

Solder leaching resistance of the metal electrode is an important factor with regard to adhesion properties of ceramic substrate. In the Low Temperature Co-fired Ceramics (LTCC), Ag-Pd or Ag-Pt pastes are used instead of pure Ag paste to prevent leaching. Solder leaching behavior of the Ag-Pd paste in relation to LTCC raw material powder size was investigated. First fabrication of LTCC green tape with different particle size was done. LTCC substrates with Ag-Pd electrode were prepared using conventional multilayer ceramic process. Dipping test was performed to test solder leaching behavior of the electrode. Ag-Pd electrode on LTCC substrate with smaller particle size achieved higher solder leaching resistance.

• 한국세라믹학회지
• /
• 제41권6호
• /
• pp.444-449
• /
• 2004

BaO-Nd$_2$O$_3$-TiO$_2$계 마이크로파 유전체 세라믹스에 결정화유리를 첨가하여 세라믹-결정화유리 복합체 유전재료를 제작하여, 적층 일체형 RF수동소자 모듈 구현을 위한 저온소결 유전재료로서의 응용가능성에 대해 검토하였다. BaO-Nd$_2$O$_3$-TiO$_2$계 유전체 세라믹스에 PbO-TiO$_2$-Al$_2$O$_3$-SiO$_2$ 조성의 결정화 유리를 5∼30 wt% 범위로 첨가하여 소결온도를 130$0^{\circ}C$에서 105$0^{\circ}C$까지 낮출 수 있었으며, 첨가량의 증가에 따라 유리의 연화로 인한 소결밀도의 증가 및 입성장이 뚜렷하게 관찰되었다. 특히, 결정화 유리를 20 wt% 이상 첨가하였을 경우, 105$0^{\circ}C$의 소결온도에서 95% 이상의 상대밀도를 갖는 양호한 소결체를 얻을 수 있었고, 이 때 유전을($\varepsilon$$_{r}$)은 72, 품질계수(Q-f)는 1500이었고, 공진주파수 온도계수($ au$$_{f}$)는 22ppm/$^{\circ}C$을 나타내었다. 이러한 높은 유전율은 유리속의 결정상 PbTiO$_3$의 존재에 기인한 것이다.