Contact forces generated by fallen debris
-
- Structural Engineering and Mechanics
- /
- v.50 no.5
- /
- pp.589-603
- /
- 2014
Expressions for determining the value of the impact force as reported in the literature and incorporated into code provisions are essentially quasi-static forces for emulating deflection. Quasi-static forces are not to be confused with contact force which is generated in the vicinity of the point of contact between the impactor and target, and contact force is responsible for damage featuring perforation and denting. The distinction between the two types of forces in the context of impact actions is not widely understood and few guidelines have been developed for their estimation. The value of the contact force can be many times higher than that of the quasi-static force and lasts for a matter of a few milli-seconds whereas the deflection of the target can evolve over a much longer time span. The stiffer the impactor the shorter the period of time to deliver the impulsive action onto the target and consequently the higher the peak value of the contact force. This phenomenon is not taken into account by any contemporary codified method of modelling impact actions which are mostly based on the considerations of momentum and energy principles. Computer software such as LS-DYNA has the capability of predicting contact force but the dynamic stiffness parameters of the impactor material which is required for input into the program has not been documented for debris materials. The alternative, direct, approach for an accurate evaluation of the damage potential of an impact scenario is by physical experimentation. However, it can be difficult to extrapolate observations from laboratory testings to behaviour in real scenarios when the underlying principles have not been established. Contact force is also difficult to measure. Thus, the amount of useful information that can be retrieved from isolated impact experiments to guide design and to quantify risk is very limited. In this paper, practical methods for estimating the amount of contact force that can be generated by the impact of a fallen debris object are introduced along with the governing principles. An experimental-calibration procedure forming part of the assessment procedure has also been verified.
Rehmannia glutinosa(Gaertn.) DC. is a herbaceous perennial plant and belonging to the Scrophulariaceae and used as roots for medicinal part and purpose. R. glutinosa is and usually used for fresh rehmannia root or prepared rehmannia root. However, it is very difficult to propagate using the seeds because of lack germination so it is propagated using the vegetative method as the rootstock. Currently, propagation and harvesting using the rootstock of R. glutinosa has difficulties about production of the high quality and quantity in R. glutinosa because of root rot disease. To optimize in vitro cultures and to improve the rootstock and seedling of R. glutinosa after morphological and genetical determination, 5 plant culture media (MS, DJ, LS, QL, and WPM) were used in this study then WPM was selected for better growth, for multiplication condition(WPM + IAA 1.0 mg/L + IBA 0.5 mg/L), and for root enlargement condition(WPM + NAA 0.1 mg/L) of R. glutinosa. Based on these results, in vitro seedlings of R. glutinosa were transferred to soil for acclimation with environment adaptation and shown the positive effects about root enlargement and root formation. Therefore, it can be used for high quality of R. glutinosa production and production of the rootstock based on propagation using in vitro seedlings of R. glutinosa.
The propose of this study was to quantify the changes of soft tissue profile following orthodontic treatment and to evaluate the relationship of those to the skeletal elements. Pre-and post-treatment lateral cephalometric head films of 40 cases(20 extraction cases, 20 non-extraction cases) were traced, and the changes following treatment were measured and quantified by digital subtraction method, and statisticall analyzed. The obtained results were as follows; 1. in extraction group, the change of upper lip area(UL) was
The objective of this study was to develop models for the predict of the milk properties (fat, protein, SNF, lactose, MUN) of unhomogenized milk using the visible and near-infrared (NIR) spectroscopic technique. A total of 180 milk samples were collected from dairy farms. To determine optimal measurement temperature, the temperatures of the milk samples were kept at three levels (
This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with
This study was conducted from July to December 1990, in order to diagnose nurses' educational need for home care. The study subjects consisted of 145 nursing educators, and the 3 groups of nurses, namely 250 senior nursing students of diploma and collegiate program, 235 health center nurses, 521 university' hospital nurses in Seoul. Four types of questionaires were formulated by Delphi method. Two questionaires for the nursing educators were designed to measure their expectations of nurses' knowledge and of their skill for home care, and another two questionaires for the nurses to measure their actual home care knowledge and skill. The results of the study were as follows : 1) The mean scores of educators' expectation for home care knowledge were 17.68 for the care of dependence on medical equipment, 17.44 for the care of mobility impairment patient, 16.56 for the care of cardiopulmonary impairment patient, 16.40 for the care of nutrition and elimination impairment patient, '1.20 for the care of psychiatric disorder patient and 9.03 for the care of cancer and terminally ill patient,. 2) The mean scores of nurses' home care knowledge tested by 20 items were 14.36 for the care of mobility impairment patient, 13.28 for the c8;re of dependence on medical equipment, 13.78 for the care of cardiopulmonary impairment patient, 12.92 for the care of nutrition and elimination impairment patient, and those of tested by 10 items were 7.08 for the care of psychologic disorder patient, 7.80 for the care of cancer and terminally ill patient. The sum of means marked 69.23. As for the nurses' home care knowledge categorized by tasks in terms of the group, significant difference were shown in the care of mobility impairment(P=0.00), cancer and terminally ill(P=0.03), nutrition and elimination impairment(P=0.00) and psychologic disorder patient(P=0.00). No significant difference were shown in the care of dependence on medical equipment and cardiopulmonary impairment patient. 3) Regard to educational need of nurses' home care knowledge categorized by task according to the group it was found that all sampled nurses had educational need in the care of mobility impairment, dependence on medical equipment, cardiopulmonary impairment, cancer and terminally ill patient. It was found that health center nurses had educational need in the care of psychologic disorder. No educational need were found in the health center nurses whose career less than 2 years, in the care of mobility impairment, cardiopulmonary impairment and psychologic disorder patient, and in those of career with 2-5 year in the care of psychologic disorder patient. No educational need were found in the hospital nurses whose career more than 15 years, in the care of cardiopulmonary impairment patient and in those of career with 11-15 year, in the care of cancer and terminally ill patient. 4) The mean scores of educators' expectation for home care skill measured by Likert 5 points scale were 4. 21 for assessing, 4.49 for planning, 4.29 for basic care, 4.42 for curative care, 4.40 for rehabilitative care, 4.36 for emergency care, 4.53 for medication, 4.31 for nutritional care, 4.32 for other means for care, and 4.38 for evaluation. 5) Regard to nurses' home care skill measured by Likert 5 points scale of self evaluation, there was a significant difference between the nurses' home care skill and group(P=0.00l). The higher scores reported by students were vital sign checking and basic care while the scores of below medium were curative care and emergency care. The higher scores reported by health center nurses were vital sign checking, other means for care and care of specimen while the scores below medium were curative, emergency and nutritional care. The higher scores reported by hospital nurses were vital sign checking, care of specimen and basic care, while the score below medium was emergency care. 6) Regard to educational need of nurses' home care skill by nursing process activity according to the group it was found that health center nurses had educational need in all nursing skills including vital sign checking, care of specimen, health assessment, socioeconomic assessment, nursing diagnosis, care plan, basic care, curative care, rehabiitative care, psychological care, emergency care, medication, nutritional care, other means for care and evaluation. And students had educational need in all nursing skills except vital sign checking, and hospital nurses had educational need in all nursing skills except vital sign checking, care of specimen and basic care. 7) In short, the result of this study suggests that the curriculum should be organized in accordence with nurses' educational background and their career for the education of nurses for home care. It should be considered to develop the short term educational program focused on curative and rehabilitative care for health center nurse or community health nurse practitioner and which was focused on family care for hospital nurse. Concerning about this field practice for home care nurse, they are required not only community practice but also . clinical practice including emergency, curative and rehabilitative care.
This studies were designed to improve the productivity of L-lysine by protoplast fusion and immobilized system of fusants using strains of Brevibacterium flavum ATCC 21528, Brevibacterium lactofermentum ATCC 21086 and Corynebacterium glutamicum 820. Mutants were isolated with concentration method of
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70