• Journal of Plant Biotechnology
• /
• v.40 no.4
• /
• pp.210-216
• /
• 2013

Efficient regeneration methods and transformation system are a priority for successful application of genetic engineering to vegetative propagated plants such as grape (Vitis labrusca L.). This research is to establish shoot regeneration system from plant explants for 'Campbell Early', 'Tamnara', 'Heukgoosul', 'Heukbosek' using two types of plant growth regulators supplemented to medium. The highest adventitious shoot regeneration rate of 5% was achieved on a medium containing of Murashige and Skoog (MS) inorganic salts and Linsmaier and Skoog (LS) vitamins, 2 mg/L of TDZ and 0.1 mg/L of IBA. Leaf tissue of 'Campbell Early', was co-cultivated with Agrobacterium strains, LBA4404 containing the vector pBI121 carrying with CaMV 35S promoter, gus gene as reporter gene and resistance to kanamycin as selective agent, the other Agrobacterium strains, GV3101 containing the vector pB7 WG2D carrying with mPAP1-D gene. mPAP1-D is a regulatory genes of the anthocyanin biosynthetic pathway. 'Campbell Early' harboring mPAP1-D gene was readily able to be selected by red color due to anthocyanin accumulation in the transformed shoot. These results might be helpful for further studies to enhance the transformation efficiency in grape.

• Korean Journal of Dental Materials
• /
• v.44 no.2
• /
• pp.129-139
• /
• 2017

This study investigated the colors and mechanical properties of layered dental composites. Four nanocomposite resins (Aelite LS, Grandio, Tetric EvoCeram, Filtek Z350XT) and a silorane-based composite resin (P90) were used for overlying and underlying materials, respectively, with different thickness combinations. Colors, translucency parameter (TP), flexural and compressive properties were evaluated. All tested specimens had different color coordinates, although all were of A3 shade. Color coordinates and TP values of layered specimens better matched those of the corresponding overlying product as the thickness of the overlying product was increased. High TP values were related with high $b^*$ value differences between specimens (p<0.05). Both flexural strength and modulus, compressive strength and modulus of layered specimens with different thickness combinations were mostly lower than those of the corresponding overlying products, respectively, in their non-layered state.

• Radiation Oncology Journal
• /
• v.24 no.2
• /
• pp.96-102
• /
• 2006

Purpose: A retrospective study was performed to evaluate the efficiency and feasibility of twice daily radiation therapy plus concurrent chemotherapy for limited-stage small cell lung cancer in terms of treatment response, survival, patterns of failure, and acute toxicities. Materials and Methods: Between February 1993 and October 2002, 76 patients of histologically proven limited-stage small cell lung cancer (LS-SCLC) were treated with twice daily radiation therapy and concurrent chemotherapy. Male was in 84% (64/76), and median age was 57 years (range, 32-75 years). Thoracic radiation therapy consisted of 120 or 150 cGy per fraction, twice a day at least 6 hours apart, 5 days a week. Median total dose was 50.4 Gy (range, 45-51 Gy). Concurrent chemotherapy consisted of CAV ($cytoxan\;1000mg/m^2,\;adriamycin\;40mg/m^2,\;vincristine\;1mg/m^2$) alternating with PE ($cisplatin\;60mg/m^2,\;etoposide\;100mg/m^2$) or PE alone, every 3 weeks. The median cycle of chemotherapy was six (range, 1-9 cycle). Prophylactic cranial irradiation (PCI) was recommended to the patients who achieved a complete response (CR). PCI scheme was 25 Gy/10 fractions. Median follow up was 18 months (range, 1-136 months). Results: Overall response rate was 86%; complete response in 39 (52%) and partial response in 26 (34%) patients. The median overall survival was 23 months. One, two, and three year overall survival rate was 72%, 50% and 30%, respectively. In univariate analysis, the treatment response was revealed as a significant favorable prognostic factor for survival (p<0.001). Grade 3 or worse acute toxicities were leukopenia in 46 (61%), anemia in 5 (6%), thrombocytopenia in 10 (13%), esophagitis in 5 (6%), and pulmonary toxicity in 2 (2%) patients. Of 73 evaluable patients, 40 (55%) patients subsequently had disease progression. The most frequent first site of distant metastasis was brain. Conclusion: Twice daily radiation therapy plus concurrent chemotherapy produced favorable response and survival for LS-SCLC patients with tolerable toxicities. To improve the treatment response, which proved as a significant prognostic factor for survival, there should be further investigations about fractionation scheme, chemotherapy regimens and compatible chemoradiotherapy schedule.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.673-682
• /
• 2001

The use of resin composites has continued to increase over the last several years. In spite of their growing popularity, composites continue to exhibit a number of undesirable characteristics. One of the major deficiencies of composite restorative resins is their inadequate resistance to wear. Of the multitude of factors that have been associated with wear, subsurface degradation within the restoration is considered to be one. The aim of this study was to evaluate the resistance to degradation of four commercial composite resins in an alkaline solution. This solution with a high concentration of hydroxyl ions is a convenient medium for accelerated degradation of silane coupling and filler particles. The brands studies were Definite($Degussa-H\ddot{u}ls$ AG, Germany), Prodigy(Kerr, USA), Pyramid(Bisco, USA) and Synergy(Coltene, Swiss). Preweighed discs of each brand were exposed to 0.1N NaOH solution at $60^{\circ}C$. After 14 days they were removed, neutralized with HCl, washed with water and dried. Resistance to degradation was evaluated on the basis of following parameters : (a) mass loss(%)-determined from pre-and post-exposed specimen weights : (b) Si loss(ppm)-obtained from ICP-AE analysis of solution exposed to specimens; and (c) degradation $depth({\mu}m)$-measured microscopically (SEM) from polished circular sections of exposed specimens. The results were follows: 1. Mass loss of Synergy was $1.24{\pm}0.002%$, it was the highest, there was no significant difference among the materials. 2. The degree of degradation layer depth of Synergy was $107.83{\pm}2.52{\mu}m$, it was the highest, there was no significant difference among any other materials than Synergy. 3. There was no difference among the four materials in Si loss. 4. The correlation coefficient between mass loss and degradation depth was relatively high(r=0.06, p<0.05). 5. There was no coefficient correlation between Si loss and mass loss, the degree of degradation layer depth and Si loss. 6. When observed with SEM, destruction of bonding is observed between resin matrix and filler.

• Restorative Dentistry and Endodontics
• /
• v.38 no.1
• /
• pp.43-47
• /
• 2013

Objectives: The aim of this study was to determine an appropriate application duration of sodium ascorbate (SA) antioxidant gel in reducing microleakage of bonded composite restoration in intracoronally-bleached teeth. Materials and Methods: Eighty endodontically-treated human incisors were randomly divided into eight groups: control, no bleaching; IB and DB, immediate and delayed bonding after bleaching, respectively; S10m, S60m, S24h, S3d and S7d, bleaching + SA gel for 10 min, 60 min, 24 hr, 3 day and 7 day, respectively. For bleaching, a mixture of 30% hydrogen peroxide and sodium perborate was applied for 7 day. All access cavities were restored using One-Step adhesive (Bisco Inc.) and then Aelite LS Packable composite (Bisco Inc.). The bonded specimens were subjected to 500 thermal cycles, immersed in 1% methylene blue for 8 hr, and longitudinally sectioned. Microleakage was assessed with a 0 - 4 scoring system and analyzed using nonparametric statistical methods (${\alpha}$ = 0.05). Results: Group IB showed a significantly higher microleakage than the control group (p = 0.006) and group DB a statistically similar score to the control group (p > 0.999). Although groups S10m, S60m, and S24h exhibited significantly higher scores than group DB (p < 0.05), the microleakage in groups S3d and S7d was statistically similar to that in group DB (p = 0.771, p > 0.999). Conclusions: Application of SA gel for 3 day after nonvital bleaching was effective in reducing microleakage of composite restoration in intracoronally-bleached teeth.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.5
• /
• pp.643-649
• /
• 2011

The objective of this study was to determine the effect of feeding direct-fed microbials (DFM) on the growth performance and prophylaxis of calf diarrhea during the pre-weaning period as an alternative to antibiotics. A multi-species DFM was formulated including three lactic acid bacteria (Lactobacillus salivarius Ls29, Pediococcus acidilactia Pa175, and L. plantarum Lp177), three Bacillus strains (B. subtilis T4, B. polymyxa T1 and SM2), one yeast, Saccharomyces boulardii, and a nonpathogenic E. coli Nissle 1917. Lactic acid bacteria and Bacillus strains were selected based on the antibacterial activity against various animal pathogens, especially pathogenic E. coli using agar diffusion methods in vitro. Test and control groups were fed milk replacer and calf starter supplemented with DFM ($10^9$ cfu each of eight species/d/head, n = 29) or with antibiotics (0.1% neomycin sulfate in milk replacer and Colistin 0.08% and Oxyneo 110/110 0.1% in calf starter, n = 15), respectively. Overall fecal score and the incidence rate of diarrhea were reduced in the DFM group compared to the antibiotics one. About 40% of calves in antibiotic group suffered from diarrhea while in DFM group only 14% showed diarrhea. There was no difference in the average daily gain and feed efficiency of two groups. The hematological levels of calves were all within the normal range with no significant difference. In conclusion, the feeding of multispecies DFM during the pre-weaning period could reduce calf diarrhea and there was no difference in the growth performance between the groups, thus showing the potential as an alternative to antibiotics.

• Korean Journal of Plant Resources
• /
• v.32 no.6
• /
• pp.689-697
• /
• 2019

This study describes an efficient and widely applicable droplet-vitrification following cryopreservation for shoot tips of strawberry (Fragaria × ananassa Duch.) cvs. 'Wonkyo3114' and 'Gurumi40'. The shoot tips were precultured in Murashige and Skoog (MS) liquid medium supplemented with sucrose (0.3-0.5M). Precultured explants were osmoprotected with loading solution (LS, C4) containing 20% glycerol and 20% sucrose for 40 min and exposed to dehydration solution (B5) containing 40% glycerol and 40% sucrose for 40 min at 25℃, Subsequently, the explants were transferred onto droplets containing 2.5 μL PVS3 on sterilized aluminum foils (4 cm × 0.5 cm) prior to direct immersion in liquid nitrogen (LN) for 1 h. The highest regrowth rate (%) in both the cultivars was obtained when the shoot tips were precultured with MS + 0.3M sucrose for 40 h at 25℃. The cryopreserved shoots tips exhibited 55% regrowth rate by culturing in NH₄NO₃-free MS medium supplemented with 3% sucrose, 1.0 g/L casein, 1.0 mg/L GA₃, and 0.5 mg/L BA for 5 weeks and in MS medium supplemented with 0.5 mg/L GA₃ for 8 weeks. This result shows that droplet-vitrification could be employed as a promising method for cryostorage of strawberry germplasm.

• Earthquakes and Structures
• /
• v.10 no.2
• /
• pp.329-350
• /
• 2016

A parametric study was conducted to investigate the seismic deformation demands in terms of drift ratio, plastic base rotation and compression strain on rectangular wall members in frame-wall systems. The wall index defined as ratio of total wall area to the floor plan area was kept as variable in frame-wall models and its relation with the seismic demand at the base of the wall was investigated. The wall indexes of analyzed models are in the range of 0.2-2%. 4, 8 and 12-story frame-wall models were created. The seismic behavior of frame-wall models were calculated using nonlinear time-history analysis and design spectrum matched ground motion set. Analyses results revealed that the increased wall index led to significant reduction in the top and inter-story displacement demands especially for 4-story models. The calculated average inter-story drift decreased from 1.5% to 0.5% for 4-story models. The average drift ratio in 8- and 12-story models has changed from approximately 1.5% to 0.75%. As the wall index increases, the dispersion in the calculated drifts due to ground motion variability decreased considerably. This is mainly due to increase in the lateral stiffness of models that leads their fundamental period of vibration to fall into zone of the response spectra that has smaller dispersion for scaled ground motion data set. When walls were assessed according to plastic rotation limits defined in ASCE/SEI 41, it was seen that the walls in frame-wall systems with low wall index in the range of 0.2-0.6% could seldom survive the design earthquake without major damage. Concrete compressive strains calculated in all frame-wall structures were much higher than the limit allowed for design, ${\varepsilon}_c$=0.0035, so confinement is required at the boundaries. For rectangular walls above the wall index value of 1.0% nearly all walls assure at least life safety (LS) performance criteria. It is proposed that in the design of dual systems where frames and walls are connected by link and transverse beams, the minimum value of wall index should be greater than 0.6%, in order to prevent excessive damage to wall members.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.11 no.1
• /
• pp.63-69
• /
• 2005

While observing silkworm larval samples received from field, microsporidian spores formed within the haemocytes of silkworm haemolymph were observed. The spores of microsporidian sp. were purified and characterized for morphological characters viz., size, shape as well as serological affinity with different Nosema spp. (M$_{11}$ and M$_{12}$). The infectivity of the isolated spores to silkworm was also studied. The microsporidian sp. was found to be highly pathogenic to silkworm, B. mori. The isolated microsporidian sp. was designated as NIK-5hm, which formed ovocylindrical spore in the haemocytes of silkworm and differed in spore size (length, 4.55 $\mu$m & width, 2.10 $\mu$m) and shape from Nosema bombycis (NIK-ls), NIK-2r (Nosema sp. Mysore [3.6 & 2.8 $\mu$m]), NIK-3h (Nosema sp. M$_{11}$ [3.8 & 1.8 $\mu$m]), NIK-4m (Nosema sp. M$_{12}$ [5.0 & 2.1 $\mu$m]) and Lb$_{ms}$ (Nosema sp. in Lamerine breed of silkworm [4.36 & 2.14]). In immonological test (Latex agglutination test), the isolated microsporidian spores did not react with antibody sensitized latex particles of N. bombycis, M$_{11}$, M$_{12}$ and Lb$_{ms}$ and thus are different type of microsporidian sp., parasitic to silkworm, Bombyx mori L.

• Structural Engineering and Mechanics
• /
• v.63 no.1
• /
• pp.1-9
• /
• 2017

Shot peening is a cold surface treatment employed to induce residual stress field in a metallic component beneficial for increasing its fatigue strength. The experimental investigation of parameters involved in shot peening process is very complex as well as costly. The most attractive alternative is the explicit dynamics finite element (FE) analysis capable of determining the shot peening process parameters subject to the selection of a proper material's constitutive model and numerical technique. In this study, Ansys / LS-Dyna software was used to simulate the impact of steel shots of various sizes on an aluminium alloy plate described with strain rate dependent elasto-plastic material model. The impacts were carried out at various incident velocities. The influence of shot velocity and size on the plastic deformation, compressive residual stress and force-time response were investigated. The results exhibited that increasing the shot velocity and size resulted in an increase in plastic deformation of the aluminium target. However, a little effect of the shot velocity and size was observed on the magnitude of target's subsurface compressive residual stress. The obtained results were close to the published ones, and the numerical models demonstrated the capability of the method to capture the pattern of residual stress and plastic deformation observed experimentally in aluminium alloys. The study can be quite helpful in determining and selecting the optimal shot peening parameters to achieve specific level of plastic deformation and compressive residual stress in the aluminium alloy parts especially compressor blades.