• 한국도로학회지:도로
• /
• 제15권1호
• /
• pp.14-20
• /
• 2013

• 소성∙가공
• /
• 제28권3호
• /
• pp.159-166
• /
• 2019

Electromagnetic forming (EMF) simulations consider 3-dimensionally coupled electromagnetic-mechanical phenomenon using LS-DYNA, therefore the calculation cost is normally expensive. In this study, a sensitivity analysis in regard to the simulation variables affecting the calculation time was carried out. The EMF experiments were conducted to form an elliptically protruding shape on a high-strength steel sheet, and it was predicted using LS-DYNA simulation. In this particular EMF simulation case, the effect of several simulation variables, viz., element size, contact condition, EM-time step interval, and re-calculation number of the EM matrices, on the shape of elliptical protrusion and the total calculation time was analyzed. As a result, reasonable values of the simulation variables between the simulation precision and calculation time were proposed, and the EMF experiments with respect to the charging voltages were successfully predicted.

• 한국전산구조공학회논문집
• /
• 제27권2호
• /
• pp.95-102
• /
• 2014

이 논문에서는 경계반력법을 이용한 비선형 지반-구조물 상호작용 해석을 위해 LS-DYNA나 MIDAS/Civil 등의 유한요소해석 프로그램과 연계하는 방법을 제시하였다. 경계반력법 적용시 유한요소프로그램에서 구조물과 지반은 선형 또는 비선형 유한요소를 이용하여 모델링하였다. 유한요소의 해석모델 외부의 무한영역으로 전달되는 탄성파를 최대한 흡수하기위해 유한요소 모델의 외측에 LS-DYNA의 경우에는 PML(Perfectly Matched Layer) 요소를, MIDAS/Civil의 경우에는 점성감쇠-스프링 요소를 적용하였다. 비선형 유한요소는 구조물영역에만 적용되는 것으로 가정하였다. 이 연구에서는 입사지진파에 의한 경계반력은 KIESSI-3D 프로그램을 이용하여 계산하였다. 선형 지반-구조물 상호작용 문제에 대해 일반적인 KIESSI-3D의 해석결과와 BRM해석결과를 비교하여 제시된 방법의 효율성을 제시하였다. 또한 수치적 비교를 통해 비선형 구조에 대해 보수적인 응답을 보이는 선형 SSI문제에 대하여 얻은 경계반력이 비선형 지반-구조물 상호작용해석에 효과적으로 적용 가능함을 알 수 있었다.

• 동력기계공학회지
• /
• 제13권3호
• /
• pp.53-58
• /
• 2009

The importance of cost reduction has grown bigger to ensure the competetive power of products in the electric home appliances industry. Thus, it is necessary to assess the reliability due to drop-impact happenning in process of distribution of microwave ovens with the panel and cavity of thinner thickness for cost reduction. In the present study, the drop/impact simulation using the explicit code LS-DYNA3D has been carried out for improving the impact resistance of a microwave oven. This CAE-based design approach can be successfully applied to enhance the deteriorated dynamic behavior under the impact conditions of dropping height 70cm according to ISTA procedure 2A.

• 한국안전학회지
• /
• 제17권3호
• /
• pp.36-42
• /
• 2002

Structural integrity of either a passenger car or a light truck is one of the basic requirements for a full vehicle engineering and development program. The results of the vehicle product performance are measured in terms of ride and handling, durability, noise/vibration/harshness(NVH), crashworthiness and occupant safety. The level of performance of a vehicle directly affects the marketability, profitability and, most importantly, the future of the automobile manufacturer. In this study, we used the virtual proving ground(VPG) approach for obtaining the dynamic characteristics. VPG approach uses a nonlinear, dynamic, finite element code(LS-DYNA3D) which expands the application boundary outside the classic linear, antic assumptions. VPG approach also uses realistic boundary conditions of tire/road surface interactions. To verify the predicted dynamic results, a single lane change test has been performed. The prediction results were compared with the experimental test results, and the feasibility of the integrated CAE analysis methodology was verified.

• 한국도로학회논문집
• /
• 제14권4호
• /
• pp.113-124
• /
• 2012

PURPOSES : In This study two different concrete barrier systems have been proposed to be established at the small vehicle driveway. One is for median barrier, and the other is for roadside barrier. METHODS : In order to determine the suitable shape of barrier, the impact parameters including vehicle weight, impact angle, impact velocity and impact level have been analyzed. The real crash test has been carried out with 0.9 ton and 2.5 ton vehicles, respectively by using the 2m segment type concrete barriers connected by steel plates that are totally 40m barrier systems. RESULTS : The numerical results obtained by LS/DYNA-3D software are compared with real crash tests from the viewpoints of vehicle stability, vehicle trajectory, occupant risk, etc. CONCLUSIONS : From the above results, the dynamic performance of proposed barrier systems satisfies the specification of Korean Code for roadside safety structures.

• 한국자동차공학회논문집
• /
• 제7권7호
• /
• pp.195-201
• /
• 1999

In Rollover crashes, the development of bus structure to ensure the maintenance of survival space for passengers is very important . So, this paper focuses on understanding the possibility of efficient structural development considering rollover strength through computer simulation using the commercial code, LS-DYNA3D at the initial stage of vehicle development structural members, and impact boundary conditions required by ADR59(Australian Design Rule 59)were applied. In order to confirm the validity of the computational results, the test results. After the usefulness of this method of analysis was confirmed , we have proposed the effective modificationfor rollover strength.

• 한국생산제조학회지
• /
• 제20권5호
• /
• pp.598-604
• /
• 2011

In guard rail crashes, the development of guard rail structure to ensure the maintenance of safety for passengers is very important. So, this paper focuses on understanding the possibility of efficient structural development considering crash strength of guard rail through computer simulation using the commercial code, LS-DYNA3D at the initial stage of guard rail development. For this study, guard rail structure was modeled using shell elements to represent major structural members and passenger car was modeled using plate elements of simple shape to do not have the drawing, and impact boundary conditions required by regulation was applied. In order to confirm the validity of the computational results, they were compared with the test results.

• 한국항해항만학회지
• /
• 제31권3호
• /
• pp.213-221
• /
• 2007

최근의 선박은 설계 단계부터 그 수명을 다할 때 까지 여러 가지 환경적인 측면이 중요하게 고려되어 제작되고 있다. 이 중 유조선의 좌초충돌에 의한 기름 유출사고는 심각한 해양오염의 일으키는 주요한 원인이 된다. 따라서 본 논문에서는 선박의 층돌해석코드를 이용한 시뮬레이션을 수행하여 선박이 어떠한 손상을 입게 되는지 알아보고자 하였다. 이를 위해서 105k 탱커모델을 구성하고 일련의 시리즈해석을 LS-Dyna3D로 해석을 수행하였다. 연구수행은 먼저, 요소크기의 수렴성을 확인하여 요소크기를 결정하였고, 좌초시나리오를 구성하여 해석한 후, 결과를 분석하여 나타내었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.348-348
• /
• 2005