• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.20 no.4
• /
• pp.217-224
• /
• 2010

The purity methods to determine LOD/LOQ using standard deviation of the residual, intercept and blank by IUPAC and ACS describe many of the pitfalls and pose significant challenges to analytical chemists. Therefore, the aim of this study is the development of the simple, easy, convenient and statistically significant method to determine LOD in quantitative analysis of organic solvents by GC. The new approaching method by linearization in the given concentration range used coefficient of variation ; ${\sigma}_{n-1}$/S(standard deviation, ${\sigma}_{n-1}$ and average, S) of sensitivity(Response/concentration). The comparison of results among the purity methods(IUPAC and ACS) and the linearization have been fulfilled the F-test for standard deviations and t-test for LOD range values. The results of F-test and t-test are satisfied within 95 % confidence level, respectably. The LOD values determined by the new procedure are n-Hexane 0.0116 mg/$m^3$, Toluene 0.0807 mg/$m^3$, and o-Xylene 0.0494 mg/$m^3$. Because the standard deviation of the residual, intercept and blank and the slope of calibration curve are not calculated and the new approaching method use the coefficient of variation of sensitivity by linearization, this new method is simple, easy, convenient and statistically significant. In future, many chemical analysts will expect to applicate and routinely use this method in the all quantitative analysis.

• Journal of Advanced Navigation Technology
• /
• v.18 no.5
• /
• pp.524-531
• /
• 2014

In this paper, we have proposed the processing and analyzing the linked open data (LOD), a kind of big-data, using resources of cloud computing. The LOD is web-based open data in order to share and recycle of public data. Specially, we defined the InfograaS (Info-graphic as a service), new business area of SaaS (software as a service), to support visualization technique for BA (business analytics) and Info-graphic. The goal of this study is easily to use it by the non-specialist and beginner without experts of visualization and business analysis. Data visualization is the process to represent visually and understand the data analysis easily. The purpose of data visualization is to deliver information clearly and effectively by chart and figure. The big data of public data are shared and presented in the charts and the graphics understood easily by various processing results using Hadoop, R, machine learning, and data mining of open source and resources of cloud computing.

• Journal of the Korean Society for information Management
• /
• v.30 no.3
• /
• pp.297-315
• /
• 2013

Anyone curious to easily access and learn Korean history has become interested in Korean history data bases, which will provide accurate and reliable historical information. Furthermore, user demands for information sharing and reusability, available through setting up a semantic web, have been increased, which have taken the shape of linked data. Efforts have been made to construct public data bases containing readily usable contents a user can understand and utilize with ease. They have been produced by several organizations, portal sites, and individuals, trying to deviate from existing mainstreams - expert-based text data bases. A problem with those data bases is that they have not considered such vital factors as the sharing and utilizing of information as a whole. This study suggests a LOD-based Korean history contents implementation system, providing rich information environment by way of multi-dimensional web-data connections. In doing so, this system has tried a historic information circulation service system which is based on information sharing and connecting.

• Spatial Information Research
• /
• v.21 no.5
• /
• pp.73-82
• /
• 2013

In recent years, according to the increase of interests in indoor space, various researches are being carried out for the construction and services of indoor spatial information. BIM data is very useful to build indoor spatial information. Accordingly, many studies for the use of BIM data on GIS part are in progress. In order to take advantage of BIM data on GIS part, the conversion technology for building indoor data and visualization techniques are required. However, most of the previous researches are focused on the conversion technology to construct indoor spatial information by importing BIM data into GIS applications while there is few research on visualization. In this study, an indoor LOD(Level of Detail) model is proposed to apply to on indoor facility management system when indoor data was constructed based on BIM data for the linkage between BIM and GIS.

• Journal of Korea Game Society
• /
• v.11 no.1
• /
• pp.131-138
• /
• 2011

Recently in terrain rendeing, most researches introduce mipmap-based out-of-core methods for handling large sized DEM data which does not fit in main memory of general computer. However, mipmap-based LOD(level-of-detail) methods occur geometric errors which appear in data simplifying the higher LOD level. These geometric errors cause geometric popping effects where LOD level changes when viewpoint moves. In this paper, we propose vertex cohesion map for reducing geometric error. In preprocessing step, we generate vertex cohesion map, which is a texture that stores the vectors. By these vectors, each vertex will be cohered into the position in which the difference of gradient value is bigger than others. Therefore in terrain rendering, using vertex cohesion map can dramatically reduce the geometry popping effects rather than using mipmap.

• Journal of the Korean Chemical Society
• /
• v.47 no.6
• /
• pp.559-568
• /
• 2003

A procedure based on liquid liquid extraction(LLE)-GC/MS has been developed for the simultaneous analysis of antioxidants and insecticides known as endocrine disrupters. The endocrine disrupters investigated in this study are butylated hydroxy anisole(BHA) and butylated hydroxy toluene(BHT), and the insecticides are allethrin and fenvalerate. The limit of detection(LOD) was 0.071~0.159 ng/ml with RSD of 1.41~5.34% for the standard sample. From water reservior of Han river, Geum river, Nakdong river and Sumjin river, these compounds were not detected. For the synthesized sample, the LOD is 0.051~0.132 ng/ml with RSD of 6.39~13.4%.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.2
• /
• pp.143-151
• /
• 2014

As the interest in indoor space increases, the demands for various services based on indoor space is increasing. With the demands, to construct spatial information for indoor space is also required, but there is not defined the LOD(Level of Detail) for indoor spatial data. Therefore, in this paper we classified data for indoor space data construction, and then we defined the accuracy and detail about the level of detail to provide suitable application services according to the type and representation method of each data. Most previous researches are focus on the geometrical representation, but in this paper we define a indoor LOD model based on type and representation method of data. In addition, we present applicable services with proposed LOD model and suggest a guideline for construction and application of indoor space.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.768-775
• /
• 2022

Current MEP designs are mostly applied by 2D-based design methods and tend to focus on simple modeling or geometry information expression such as converting 2D-written drawings into 3D modeling without taking advantage of the strength of BIM application. To increase the demand for BIM-based MEP design, geometric information, and property information of each member of the 3D model must be conveniently linked from the phase of the Design Development (DD) to the phase of Construction Document (CD). To conveniently implement a detailed model at each phase, the detailed level of each member of the 3D model must be specific, and an automatic generation of objects at each phase and automatic detailing module for each LOD are required. However, South Korea's guidelines have comprehensive standards for the degree of MEP modeling details for each design phase, and the application of each design phase is ambiguous. Furthermore, in practice, detailed levels of each phase are input manually. Therefore, this paper summarized the detailed standards of MEP modeling for each design phase through interviews with MEP design companies and related literature research. In addition, items that enable auto-detailing with DYNAMO were selected using the checklist for each design phase, and the types of detailed methods were presented. Auto-detailing items considering the detailed level of each phase were classified by members. If a DYNAMO algorithm is produced that automates selected auto-detailing items in this paper, the time and costs required for modeling construction will be reduced, and the demand for MEP design will increase.

• Journal of KIISE
• /
• v.43 no.6
• /
• pp.700-709
• /
• 2016

Recently, with the rapid growth of LOD (Linked Open Data) existing methods based on a single machine have limitation in performance. Existing solutions use distributed framework such as Mapreduce in order to improve the performance. However, the MapReduce framework for processing SPARQL queries involves multiple MapReduce jobs and additional costs incurred. In addition, the problem of unnecessary data processing arises. In this study, we proposed a method to reduce the number of MapReduce jobs during SPARQL query processing and join indexes based on Bitmap for minimizing the costs of processing unnecessary data.

• Journal of Mechanical Science and Technology
• /
• v.19 no.2
• /
• pp.549-557
• /
• 2005

The requirements of multi-resolution models of feature-based solids, which represent an object at many levels of feature detail, are increasing for engineering purposes, such as analysis, network-based collaborative design, virtual prototyping and manufacturing. To provide multi-resolution models for various applications, it is essential to generate adequate solid models at varying levels of detail (LOD) after feature rearrangement, based on the LOD criteria. However, the non-commutative property of the union and subtraction Boolean operations is a severe obstacle to arbitrary feature rearrangement. To solve this problem we propose history-based Boolean operations that satisfy the commutative law between union and subtraction operations by considering the history of the Boolean operations. Because these operations guarantee the same resulting shape as the original and reasonable shapes at the intermediate LODs for an arbitrary rearrangement of its features, various LOD criteria can be applied for multi-resolution modeling in different applications.