• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2009.03a
• /
• pp.159-159
• /
• 2009

Repeated pulling-out of a suture anchor in the lateral row despite repeated attempts at insertion during a rotator cuff repair is not uncommon with the suture-bridge technique, especially in patients with osteoporosis. We describe a simple procedure for dealing with the pull-out of a PushLock anchor in the lateral row using a suture anchor with a suture eyelet during rotator cuff repair applying the suture-bridge technique.

• Journal of the Korean Vacuum Society
• /
• v.5 no.2
• /
• pp.156-160
• /
• 1996

The purity dependence of the Curie point and the critical exponent of heat capaicty has been studied by measuring the resistvity of nickel samples with several different purities. The resistivity was measured by the 4-point ac method with a lock-in amplifier. The Curie points determined from in-phase and out-of-phase signals were found to be consisten twith each other . We found that the Curie point and the critical exponent of heat capacity did not depend on the purity of samples.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.8
• /
• pp.73-81
• /
• 2012

In this paper, a novel phase locked loop has been proposed using an analog band-selection loop. When the PLL is out-lock, the PLL has a fasting locking characteristic with the analog band-selection loop. When the PLL is near in-lock, the bandwidth becomes narrow with the fine loop. A frequency voltage converter is introduced to improve a stability and a phase noise performance. The proposed PLL has been designed based on a 1.8V $0.18{\mu}m$ CMOS process and proved by HSPICE simulation.

• International Journal of Automotive Technology
• /
• v.3 no.4
• /
• pp.165-170
• /
• 2002

For a vehicle Anti-lock Braking System (ABS), the control target is to maintain friction coefficients within maximum range to ensure minimum stopping distance and vehicle stability. But in order to achieve a directionally stable maneuver, tire side forces must be considered along with the braking friction. Focusing on combined braking and turning operation conditions, this paper presents a new control scheme for an ABS controller design, which calculates optimal target wheel slip ratio on-line based on vehicle dynamic states and prevailing road condition. A fuzzy logic approach is applied to maintain the optimal target slip ratio so that the best compromise between braking deceleration, stopping distance and direction stability performances can be obtained for the vehicle. The scheme is implemented using an 8-DOF nonlinear vehicle model and simulation tests were carried out in different conditions. The simulation results show that the proposed scheme is robust and effective. Compared with a fixed-slip ratio scheme, the stopping distance can be decreased with satisfactory directional control performance meanwhile.

• Fire Science and Engineering
• /
• v.27 no.1
• /
• pp.26-30
• /
• 2013

It is necessary to use pressure reducing valves to provide required water pressure in water-based fire suppression systems of the tall buildings. In many cases, however, pressure reducing valves lose their function due to the phenomenon of pressure equalization caused by valve leak. This study carried out performance evaluation of the recently developed pressure reducing valve to prevent pressure equalization and found it can maintain designed pressure reducing ratio within 11% variation and prevent pressure equalization by automatic self-lock function of the piston.

• Journal of Korea Water Resources Association
• /
• v.30 no.6
• /
• pp.649-659
• /
• 1997

The influence of polluted water discharged from the Saemankeum Lake is predicted by using two-dimensional finite element model. The simulation results show that influence of the Polluted water to the northern part of the Kckunsan Islands is small during flood time. The reason is because lock gates are located in the south of the Kokunsan Islands so that tidal current directing north is blocked by these Islands. However, during the ebb time, the influence of the polluted water is extended to the whole southern part of the Kokunsan Islands. When the amount of ten percent of the total volume of polluted water is discharged from the Saemankeum Lake, equi-concentration contour line of one tenth of initial discharge concentration includes the inner area surrounded by Sinsi Island, Munyeo Island, Bian Island, and Daehang-Li. In general, peak concentration near the lock gates is found out to be higher during the spring tide than the neap tide.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.12
• /
• pp.526-533
• /
• 2006

In this paper, we presented the synchronization module between RF shower system and RFID Reader to extend interrogating range on Mobile RFID system, Costas Loop and FPLL(Frequency/phase Lock Loop) were used. We achieved compromised range of 3MHz locking frequency, 1ms locking time and figured out remarkable Hopping frequency of the Reader. The prototype of the new designed RFID system has been tested with ISO18000-6 type-B Tag. The read range between designed RFID Reader and Tag has been measured, it increased triple times by adjusting the Shower system output level.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.8
• /
• pp.1558-1563
• /
• 2007

In this paper, phase-locked loop (PLL) of a combinational architecture consisting of an adaptive bandwidth and fractional-N is presented to improve performances and reduce the order of ${\Delta}{\Sigma}$ modulator while maintaining equivalent or better performance with fast locking. The architecture of adaptive bandwidth PLL was simulated by HSPICE using 0.35m CMOS parameters. The behavioral simulation of the proposed adaptive bandwidth fractional-N PLL with a ${\Delta}{\Sigma}$ modulator was carried out by using MatLab to determine if the architecture could achieve the objectives. The HSPICE simulation showed that this type of PLL was able to fast locking, and reduce fractional spurs about 20dB.

• Structural Monitoring and Maintenance
• /
• v.9 no.2
• /
• pp.201-220
• /
• 2022

Lateral vibrations of footbridges may induce synchronization between pedestrians and structure itself, resulting in amplification of such vibrations, a phenomenon identified by lock-in. However, investigations about accelerations and frequencies of the structural movement that are related to the occurrence of synchronization are still incipient. The aim of this paper is to investigate conditions that could lead to avoidance of synchronization among pedestrians themselves and footbridge, expressed in terms of peak acceleration. The focus is on the low acceleration range, employed in some guidelines as a criterion to avoid synchronization. An experimental campaign was carried out, employing a prototype footbridge that was set into oscillatory motion through a pneumatic exciter controlled by a fuzzy system, with controlled frequency and amplitude. Test subjects were then asked to cross the oscillating structure, and accelerations were simultaneously recorded at the structure and at the subject's waist. Pattern and phase differences between these signals were analysed. The results showed that test subjects tended to keep their walking patterns without synchronization induced by the vibration of the structure, for structural peak acceleration values up to 0.18 m/s², when frequencies of oscillation were around 0.8 to 0.9 Hz. On the other hand, for frequencies of oscillation below 0.7 Hz, structural peak accelerations up to 0.30 m/s² did not induce synchronization.

• The Korean Journal of Pain
• /
• v.10 no.1
• /
• pp.34-41
• /
• 1997

Background : Patient-controlled analgesia(PCA) is a safe and effective technique for providing postoperative pain relief. Studies that compare epidural vs intravenous routes of opiate administration show conflicting results. We designed a prospective, randomized, controlled study to evaluate the safety and efficacy of epidural(EPI-PCA) morphine-bupivacaine versus intravenous (IV-PCA) nalbuphine when administered with a PCA system. Methods : Forty healthy women were randomly assigned to receive an epidural bolus of morphine 3 mg and 0.5% bupivacaine 10 ml, followed by a EPI-PCA with 0.01% morphine and 0.143% bupivacane (basal infusion 1 ml/hr, bolus 1 ml, lock-out interval 30 min) or intravenous bolus of nalbuphine 0.1 mg/kg followed by a IV-PCA with nalbuphine(basal infusion 1 mg/hr, bolus 1 ml, lock-out interval 20 min) for pain relief after cesarean delivery. This study was conducted for 2 days after cesarean section to compare the analgesic efficacy, side effects, patient satisfaction either as EPI-PCA or as IV-PCA. Results : EPI-PCA group had significant lower visual analog pain scale(VAS) at immediate postoperative period, whereas no significant difference was observed when pain was assessed at other time sequence. Urinary retention and pruritus were more frequent with EPI-PCA group, although the incidence of other side effects were the same. Conclusions : Although EPI-PCA with morphine-bupivacaine was of significantly lower VAS at immediate postoperative period, IV-PCA with nalbuphine is a safe and effective alternative to EPI-PCA with morphine-bupivacaine for providing pain relief after cesarean delivery. Further studies about IV-PCA with nalbuphine are needed to control the immediate postoperative pain and to further improve effective pain management.