• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.78-85
• /
• 2020

The scaffolding system, which is a construction workbench of the cargo containment for a membrane LNG carrier, is a large truss structure composed of various members. To shorten the installation period and process of the scaffolding system, it is effective to enlarge the mounting unit from the existing two stages to eight stages. Owing to the increase in lifting load according to the large size of the module, the stresses around the pin and hole will be increased significantly. In this study, a tensile strength test and contact stress analysis were performed to confirm the structural safety. The relatively large hole deformation was observed visually near the average load generated in the vertical pipe at the top through tensile strength tests. A contact stress calculation confirmed the stress distribution around the hole. The contact problem was dealt with in terms of the Herzian contact stress. The possibility of 8-stage loading was examined by comparing the yield strength and contact stresses of failure critical locations. As a result, the 8-stage loading method of the existing scaffolding material was inadequate, and a new loading method with proper safety is proposed.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.175-176
• /
• 2006

러시아의 북극해(Northern Sea) 연안은 석유와 천연 가스등 자원이 대규모로 매장된 곳이어서 근래에는 해상을 통한 수송 방법이 적극적으로 추진되고 있다. 최근 쇄빙기능을 가진 컨테이너, 유조선이 발주되었으며 향후 쇄빙 LNG 운반선도 발주될 예정이다. 국내에서는 2005년 말 최초로 러시아 Sovcomflot 에서 발주한 쇄빙유조선 70K Arctic Shuttle Tanker 를 수주하였으며 Ambient air temperature $-40^{\circ}C$(Extreme low temperature $-40^{\circ}C$) 에 적용한 Winterization 에 대해 설명하고자 한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.2
• /
• pp.75-84
• /
• 1997

The up-to-date fatigue strength assessment system for ship structures was developed based on the spectral analysis method and numerical calculation for a membrane type LNG carrier was carried out to verify the effectiveness of the developed system. The wave induced loads acting on the ship's hull were calculated based on strip theory. And introducing the concept of influence factor and 3-D fine mesh structural analysis, direct calculation of long-term distribution of wave induced stress components was realized. Using the derived long term distribution of stress components and Miner-Parmgren's linear damage accumulation rule, fatigue strength of structural components were investigated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.868-875
• /
• 2000

이 연구의 목적은 당사에서 제작한 멤브레인형 $130,000M^3$와 $135,000M^3$ LNG 운반선의 진동특성을 파악하고, 거주구역의 진동수준을 예측하기 위함이다. 우선 공진 회피의 관점에서 최적의 프로펠러를 선택하기 위해 간단한 계산을 수행한 후, 주변 해수를 고려한 선박 전체를 모델링하여 3차원 유한요소해석을 수행한다. 이 계산은 보다 정확한 고유진동수를 결정하고, 프로펠러 기진의 주파수 범위에서 관련된 모드 형상을 결정하며, 선박 거주구에서 기대되는 진동수준은 잘 예측할 수 있다. 다음으로 선박이 진수되고 전체구조가 조립된 후 안벽에서 불평형 가진기를 이용해 가진기테스트를 실시하고, 해상시운전 중에도 동일한 방법으로 테스트를 실시한다. 시험은 고유진동수의 항으로 선박의 실제진동응답과 계산결과와의 좋은 비교를 가능하게 한다. 추가적으로 실제 엔진을 구동해 RPM을 최저에서 최고까지 천천히 변경하면서 실제 운항 중 진동응답을 계측함으로서 고유진동수를 예측하여 해석결과 및 가진기 시험결과와 비교한다.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2005.06a
• /
• pp.76-83
• /
• 2005

Membrane type LNG Carriers are characterized by their special structures such as trunk deck above upper deck. It is necessary to introduce an appropriate structure arrangement taking into account transition of the trunk deck to the upper deck or deckhouse in fore and aft parts. The transition area at aft part -from trunk deck to the deckhouse - is to be specially considered because of high longitudinal stresses applied at the area. This study has been carried out to tackle the transitional structure problem in design stage This paper deals with not only mesh size of FE models for scantling evaluation and fatigue assessment but also technical issues regarding fatigue assessment.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.2
• /
• pp.213-220
• /
• 2008

The aim of this paper is to build up the design model using ASMOD(Adaptive Spline Modeling of Observation Data) for the optimum scale of fleet, ship particulars and ship speed, etc. ASMOD, which define membership functions of fuzzy rule as B-spline basis function, represents a whole system as the sum of the sub-model. As it reduces the number of division of the space generated by the fuzzy set of input variables, it has a advantage of simplification to model structure and is efficient to represent the non-linear model.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.698-703
• /
• 2014

Currently, demand of liquefied natural gas as an alternatice energy inceases because of depletion of fossil fuels. it is accompanied by inceasing demand of LNG ship. Consequentially, it is expected that demand of bellows for LNG ship increase. The material used for LNG vessels's bellows is an alloy of INCOLOY 825 and STS316L, which are strong against low-temperature brittleness and seawater corrosion. This study establishes the welding condition of LNG vessel's bellows material in extremely low temperature, and analyzes the formability of weld through Erichsen Test. When welding was conducted at optimal condition, tensile strength of weld presneted strength value up to 90% compared with base metal. As results of formalbility through Erichsen test, very good weld that failure occrued in base metal was gotten.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.3 s.153
• /
• pp.296-304
• /
• 2007

The objective of this paper is to investigate the dynamic strength characteristics of LNG carriers cargo containment system under impact loads experimentally. The material properties were experimentally obtained for individual components of MARK III insulation system. A series of impact tests was performed using a custom-built drop experiment facility as varying heights and weights of the drop object. Crack initiation and propagation were measured during the cyclic dry drop experiment. The quantitative relationship between impact load and crack initiation as well as the cycle number and crack propagation were reported.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.5 s.143
• /
• pp.448-457
• /
• 2005

The experiment was performed at the large wind tunnel of the Chungnam National University to measure the velocity distribution around the stern of a Liquefied Natural Gas Carrier model. The data, mean velocity vectors of turbulent shear flows at the stern and near-wake including the propeller plane, were obtained by a five-hole Pilot tube for the double body model fixed inside the wind tunnel test section. The present result of the double body model shows a close agreement with the result of the lowing tank experiment performed by the KRISO for the same ship model. The characteristics of the LNG stern flow are discussed based on the measured velocity distribution. The data can be very useful for the validation of some numerical methods in computational fluid dynamics.

• Information and Communications Magazine
• /
• v.25 no.11
• /
• pp.29-35
• /
• 2008

조선 IT기반 융합산업은 차세대 신산업의 발원지로서 막대한 가치창출이 기대되는 블루오션 산업이며, 한국의 최대 강점인 IT/통신 기술과 세계1위인 조선 산업의 융합을 통하여 최고의 부가가치 산업으로 업그레이드가 가능하게 된다. 현재 글로벌 조선 산업은 고부가 가치 선박인 크루저/레저선과 LNG선과 같은 청정에너지 운반선, 선박과 물동량증가에 따른 대형 SuperSeaCat 선박의 출현으로 인해 기존 기계 조선 기술분야에 첨단 IT 융합기술의 접목이 절실히 요구되고 있다. 이에 본고에서는 선박통신 네트워크 기술개발 및 표준화, e-Navigation 추진방향, IT-선박 융합부품 기술개발 등에 대해 살펴보고 IT-조선 융합화 현황을 분석하여 비전과 목표제시를 통해 추진방향을 제시하고자 한다.