• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.6
• /
• pp.183-189
• /
• 2003

The study of the automotive noise reduction has been concentrated on the reduction of the automotive engine noise because the engine noise is the major cause of automotive noise. However, many studies of automotive engine noise led to the interest of the noise reduction of the exhaust and intake system. Recently, the active control method is used to reduce the noise of an automotive exhaust and intake system. It is mostly used the LMS(Least-Mean-Square) algorithm as an algorithm of active control because the LMS algorithm can easily obtain the complex transfer function in real-time. Especially, Filtered-X LMS (FXLMS) algorithm is applied to an Active Noise Control system. However, the convergence performance of LMS algorithm went bad when the FXLMS algorithm was applied to an active control of the induction noise under rapidly accelerated driving conditions. So, in order to solve this problem, the modified FXLMS algorithm is proposed. In this study, the improvement of the control performance using the modified FXLMS algorithm under rapidly and suddenly accelerated driving conditions was identified. Also, the performance of an active control using the LMS algorithm under rapidly accelerated driving conditions was evaluated through the theoretical derivation using a chirp signal to have similar characteristics with the induction noise signal.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.3
• /
• pp.224-229
• /
• 2009

In this paper, an efficient signal interference control technique to improve the convergence speed of Adaptive transversal filter with LMS algorithm is introduced. The convergence characteristics of the proposed algorithm, whose coefficients are multiply adapted in a symbol time period by recycling the received data, are analyzed to prove theoretically the improvement of convergence speed. According as the step-size parameter ${\mu}$ is increased, the rate of convergence of the algorithm is controlled. Increasing the eigenvalue spread has the effect of controlling down the rate of convergence of the adaptive equalizer and also increasing the steady-state value of the average squared error and also demonstrate the superiority of signal interference control to the filter algorithm increasing convergence speed by (B+1) times due to the data-recycling LMS Algorithms.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.3
• /
• pp.28-36
• /
• 1995

In this paper, a double loop control model using leaky delay LMS algorithm are proposed for active noise control. The proposed double loop control model estimates the loudspeaker characteristic and the error path transfer function with on-line using only gain and acoustic time delay to reduce computation burden. The control of error signal through double loop control scheme makes the more robust cntrol system. The input signal of filter to estimate acoustic time delay is used difference between input signal of input microphone and adaptive filter output. And also, in nonstationary environments, the leaky delay LMS algorithm is employed to counteract parameter drift of delay LMS algorithm. For practical noise signal, the proposed double loop control model reduces noise level about 12.9 dB.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.3
• /
• pp.111-116
• /
• 2013

Noise problem that occurs on the road is raising a lot of problems in the economic, social and environmental aspects. The objective of this paper is to propose ANC(active noise cancellation)-based road traffic noise reduction algorithm-model which can reduce noise by generating frequency opposed to noise sources to improve and complement the problem that existing physical form of a noise barrier. In this paper, we measured the noise characteristic from collection of two difference car noise also ANC simulation has been performed by using road traffic noises input. In order to compare the control performance, we performed noise reduction simulation of ANC by filtered-X LMS algorithm and delayed control signal injection. As a result of this simulation, we confirmed that convergence performance and noise decrease effect to the filtered-X LMS algorithm by inputting the road traffic noise.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.1
• /
• pp.15-26
• /
• 2003

Ultrasonic inspection methods are widely used for detecting flaws in materials. The signal analysis step plays a crucial part in the data interpretation process. A number of signal processing methods have been proposed to classify ultrasonic flaw signals. One of the more popular methods involves the extraction of an appropriate set of features followed by the use of a neural network for the classification of the signals in the feature space. This paper describes an alternative approach which uses the least mean square (LMS) method and expectation maximization (EM) algorithm with the model based deconvolution which is employed for classifying nondestructive evaluation (NDE) signals from steam generator tubes in a nuclear power plant. The signals due to cracks and deposits are not significantly different. These signals must be discriminated to prevent from happening a huge disaster such as contamination of water or explosion. A model based deconvolution has been described to facilitate comparison of classification results. The method uses the space alternating generalized expectation maximization (SAGE) algorithm In conjunction with the Newton-Raphson method which uses the Hessian parameter resulting in fast convergence to estimate the time of flight and the distance between the tube wall and the ultrasonic sensor Results using these schemes for the classification of ultrasonic signals from cracks and deposits within steam generator tubes are presented and showed a reasonable performances.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.2 s.332
• /
• pp.49-59
• /
• 2005

An adaptive hybrid beamformer is proposed to improve the reception performance of the advanced television system committee (ATSC) digital television (DTV) in a mobile environment. Dynamic multipaths and Doppler shifts severely degrade the reception performance of the ATSC DTV receiver. Accordingly, a hybrid beamformer, called a Capon and least mean square (CLMS) beamformer, is presented that uses direction of arrival (DOA) information and the least mean square (LMS) beamforming algorithm. The proposed CLMS algerian efficiently removes dynamic multipaths and compensates for the phase distortion caused by Doppler shifts in mobile receivers. After the CLMS beamformer is operated, the subsequent use of an equalizer removes any residual multipath effects, thereby significantly improving the performance of DTV receivers. The performances of the proposed CLMS, Capon, and LMS beamformersare compared based on computer simulations. In addition, the overall performance of the CLMS beamformer followed by an equalizer is also considered.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.172-176
• /
• 2013

This paper presents a modified filtered-x least mean square (FxLMS) algorithm to improve the stability of active noise control (ANC) system in realistic environment. A real-time ANC system employing modified FxLMS is designed and implemented on digital signal processor (DSP) board. The ANC system is evaluated for cancelling various tonal frequency noises in the range from 100 to 500 Hz and the performance is measured in terms of sound pressure level (SPL) attenuation. Experiment results show that a quiet zone with maximum 20 dB SPL attenuation can be generated around the location of error microphone.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.508-511
• /
• 2003

For the purpose of equalisation of rapidly time variant channels, We derive a novel adaptive algorithm the amplitude Banded LMS(ABLMS), which implements a non-linear adaptation based on a coefficient matrix. Then we develop the ABLMS algorithm as the adaptation procedure for a linear transversal equalise.(LTE) and a decision feedback equaliser(DFE) where a parallel adaption scheme is deployed.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.760-762
• /
• 1999

본 논문에서는 기존의 적응필터인 LMS(Least Mean Square)와 RLS(Recursive Least Square)의 수렴속도의 향상과 안정성을 개선하기 위한 방안을 제안하였다. 제안된 알고리즘은 기존의 시간영역 LMS 알고리즘보다 상당히 빠른 수렴속도를 보일 수 있도록 설계하였다. RLS 알고리즘는 역행렬연산으로 인한 연산량이 많고 자기상관행렬이 positive definite 특성을 잃어버릴 경우 시스템이 수치적으로 불안정하게 되어 발산하는 단점이 있다. 이런한 단점을 보완하기 위해 제안된 알고리즘을 사용하였다. 기존의 알고리즘은 전력 정규화 과정에서 입력신호의 변환이 백색화가 완전히 이루어지지 않게 되어 자기상관행렬이 순수한 대각행렬이 되지 않는 단점을 지니고 있으나, 본 연구에서는 이러한 대각화 과정에서 좀더 많은 정보를 포함하도록 설계하였다. 아울러 제안된 알고리즘을 적응 등화기에 적용하여 수렴속도가 개선됨을 검증하였다.

• Transactions of the Society of Information Storage Systems
• /
• v.9 no.1
• /
• pp.5-9
• /
• 2013

Page-oriented holographic data storage (HDS) is very sensitive to the disturbances. However, vibration effect by disc imbalance can be ignored because data pages are recorded and retrieved with stop-go rotation. Therefore, just estimating de-track due to eccentricity of disc is enough to construct stable track servo system. In this paper, propose the spacing of track servo patterns optimization method using Least Mean Square (LMS) estimation algorithm. Through the patterns spacing optimization, storage density maximize can be achieved.