• Korean Journal of Food Science and Technology
• /
• v.36 no.2
• /
• pp.239-245
• /
• 2004

Storage quality of minimally processed onion as influenced by hot-water dipping was investigated to examine feasibility of mild heat treatment as efficient post-processing method. fresh onions were peeled, trimmed, and dipped in hot water at various temperatures ($50-80^{\circ}C$) for 1 min. Heat-treated onions were cooled, de-watered, packaged in low density polyethylene (LDPE) film pouches ($63\;{\mu}m\;thickness$), and stored at $10^{\circ}C$. Samples treated at higher temperatures ($70-80^{\circ}C$) showed significant increases in flesh weight loss and discoloration during storage as compared to others. Hot-water dipping remarkably reduced initial microbial load of prepeeled onions, with over 1 log cycle decrease in aerobic bacterial count. After 7 days storage, no significant differences in viable aerobe count were observed among treated and untreated samples, with both showing $10^{6}-10^{7}\;CFU/g$. For sensory attributes including discoloration, wilting, decay, and visual quality, onions treated with hot-water dipping at $60^{\circ}C$ scored highest. Results suggested hot-water dipping at specific condition as practical post-processing treatment could effectively prolong shelf life of minimally processed onion.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.4
• /
• pp.73-80
• /
• 2007

As BTL(Build-Transfer-Lease) private investment business benchmarking PHI(Private Finance Initiative) of USA and Japan is introduces to Korea since 2005, as a part of supplying high leveled public service and early expanding required facilities for SOC, Value for Money on private investment business from treasury investment business at the beginning gets to be needed. Accordingly, this survey has been conducted in order to analyse BTL projects status, propriety of economic analysis method(VFM analysis, calculation of estimated business expenses, valuation of bidding price, etc.) by business advance phases from the viewpoint of person in charge, necessity of improvement and alternative plants. As the result of conducting cross tabulation analysis and correlation analysis by occupational group, BTL project advance phases and alternative plans for improvement, it is necessary ye prepare standardized service level against business expense and basis for calculating and evaluation operation expenses. Based on the necessity of quantitative analysis (LCC analysis) of VFM, standard for calculating management, maintenance and administration expenses is required. In addition, reliable economic valuation system considering domestic BTL environment should be setup, for business efficiency.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.3
• /
• pp.43-51
• /
• 2018

Facility Management (FM) phase in building lifecycle management is the most crucial phase concerning building value and life cycle cost management. Nevertheless, systematic and rational FM process is not yet constructed, leading to failure of facility value and cost management from accurate and proactive FM. This is because there has been minimal approach regarding construction of optimal FM process based on rational FM data analysis. The purpose of this study is to provide optimal FM process with quantitative FM data analysis method using spatial data. This study investigated existing FM data structure and derive the limitation of it from both expert interview and practical FM material analysis. As a solution for this limitation, this study provided optimal FM process with MTBF (Mean Time Between Failure), which is quantitative FM data analysis method. The effect of the provided process was validated with a case study. It is expected that this process allows rational and objective FM data analysis, resulting in accurate and proactive FM. And it is expected that it can be used as a useful basic data for developing an effective system for the FM process.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4B
• /
• pp.332-345
• /
• 2011

As weapon systems are evolving into more advanced and complex ones, the role of the software is becoming heavily significant in their developments. Particularly in the war field of today as represented by the network centric warfare(NCW), the reliability of weapon systems is definitely crucial. In this context, it is inevitable to develop software reliably enough to make the weapon systems operate robustly in the combat field. The reliability engineering activities performed to develop software in the domestic area seem to be limited to the software reliability estimations for some projects. To ensure that the target reliability of software be maintained through the system's development period, a more systematic approach to performing software reliability engineering activities are necessary from the beginning of the development period. In this paper, we consider the software reliability in terms of the development of a weapon system as a whole. Thus, from the systems engineering point of view, we analyze the models and methods that are related to software reliability and a variety of associated activities. As a result, a process is developed, which can be called the software reliability engineering process for weapon systems (SREP-WS), The developed SREP-WS can be used in the development of a weapon system to meet a target reliability throughout its life-cycle. Based on the SREP-WS, the software reliability could also be managed quantitatively.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.4
• /
• pp.218-220
• /
• 1999

The performance of the Electric Vehicle and Hybrid Electric Vehicle depends on that of the battery pack composed of series connected batteries. And thermal property is one of the main factors which decide the performance of the battery pack. So heat generation rate from the battery under the various driving mode must be measured as precise as possible because thermal characteristics of the battery affect the driving performance and battery pack's life cycle. Besides, to design and develop the battery thermal management system for the EV and HEV, the measurements of the thermal properties of the batteries are needed. However, the established calorimeter is not adequate to test an EV's battery because its cavity is too small to accommodate the EV's battery. Therefore we developed the calorimeter to test the thermal property of the EV's battery. Its cavity size is 120mm long, 75mm wide and 200mm high. The calorimeter is calibrated by the dummy cell which generates the heat rate from zero to 200W. The measuring accuracy of the calorimeter is within $2\%$ and its voltage stability is 2.5mV in the constant temperature bath.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.5
• /
• pp.911-918
• /
• 2014

Over the past few years, security breaches have been consistently reported around the world. Especially, people's personal information are at risk of being breached as the firms gather and utilize the information for their marketing purposes. As an effort to revamp their data infrastructures, companies have rebuilt their system that almost every data, including the personal information, are stored within the digital database. However, this migration provides easier access to the database but it has also increased the system vulnerability. As the data can be easily exposed to the unauthorized personnel both intentionally and unintentionally, it is necessary for companies to establish a set of security protocol and operate the personal information protection system. There are two major certified security system in South Korea; PIMS from KISA and PIPL from NIA. This paper analyzes the preferences of SMEs and small business using conjoint attributes of PIMS and PIPL. The study shows that the business owners take post certification rewards as the most important factor. It also shows that the attributes that have the highest utility rates are the following; 1) KISA certification, 2) 79 points of protection counter measurements, 3) 28 items of life cycle, 3) 50 percent discount on certification fee, and 4) Reduced amount of fine for personal information leakage incident.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.2
• /
• pp.468-474
• /
• 2017

A test service for the weapon systems evaluation is one of the most important processes during the weapon systems acquisition or development life cycle. Before completion of weapon systems development, the appropriate evaluation test can reduce risk and expense which might be expected during weapon systems development procedure. In this paper, it is suggested that a probabilistic prediction method based on Monte Carlo simulation for how much the annual weapon systems evaluation test excution ratio can be reached compared to the yearly initial planned test quantity. And then a weapon systems evaluation test quantitative management scheme is suggested to assist decision making for the test schedule manager who can arrange monthly test schedule based on the prediction result of annual test excution ratio. And the proposed method is applied for the weapon systems evaluation firing test data of the 8th directorate, Agency for Defense Development(ADD). And also the application result is examined.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.2
• /
• pp.401-408
• /
• 2017

Recently, the environment at littoral sea has been contaminated and damaged by submarine deposits, e.g. the fishing nets. To solve this problem, the government pushes the policies such as management plan of the fishing nets in whole life cycle of them. The representative causes are dumping and drifting away of the fishing nets, and shed new light on technological methods for tracking and management of the fishing nets. To prevent this drawbacks, this paper covers a development of tracking and management system for the fishing nets. To do this, we analyzed the existing products, and figured out performance improvement points. Also we proposed additional enhancement techniques which connects with a smartphone application and displays the positions and state information of the fishing nets, and so on. To adopt the proposed methods, we design and implement a tracking and management system based on ENC with the smartphone application, and verified the usefulness of the system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.367-373
• /
• 2016

The construction of National Spatial Data Infrastructure (NSDI) started from 2008 and was completed at 2012, with the aim of co-utilizing public agencies' national spatial information by integrating and linking. Despite the existence of the NSDI, an update of spatial data is not fully reflected because the spatial information has not been updated simultaneously by NSDI and public agencies. By examining the public agencies' services using the spatial information, a national budget is wasted because the re-usable similar services are duplicated. These issues could be solved by adopting a cloud system, whose concept is co-utilizing IT resources, to the NSDI. This study examined the service cloud based expansion and development plan for NSDI. The plan included an implementation strategy for a spatial information service cloud system and an establishment plan for a governance system. The service scenarios, concept diagram, and service functions for the system were derived in a system implementation plan. For the service functions, the unit functions of two modules were proposed and specific functions were derived. In the establishment of a governance system, the business roles and business processes were defined for organizations managing service cloud based NSDI. The business role and process were defined and derived by each service life-cycle step. With the proposed system implementation plan, a detail system design and composition of the organization could be possible, and a service cloud-based NSDI system could be implemented.

• Journal of Embryo Transfer
• /
• v.29 no.3
• /
• pp.283-287
• /
• 2014

Sexed semen is commonly used for the production of calves of the desired gender. Gender selection is important in animal production industries. For example, female cattle are required for the dairy industry while males are preferred in the beef cattle industry. The present study was to assess the in vivo embryo production efficiency using the semen separated according to sex during superovulation in Hanwoo. Seventy Hanwoo donor cows were flushed on day 7 of estrus cycle with same FSH and artificial insemination by the same technicians. Embryos were recovered on 7 days after the third insemination by flushing the uterus with embryo collection medium. KPN semen straws used artificial insemination contained 20 million sperm (total number 60 million per donor). Sex-sorted semen straws contained 4 million sperm (total number 12 million per donor). The results obtained were as follows: No differences were observed in the efficiency of superovulation rates on KPN semen 87%, and sexed semen 100%, respectively. The mean numbers of total embryos are each $12.58{\pm}8.31$ and $13.25{\pm}7.86$. The mean numbers of transferable embryos, sexed semen were significantly lower than KPN semen ($3.75{\pm}1.98$ vs. $8.23{\pm}6.07$, P<0.05). The rates of unfertilized embryos from superovulation using sexed semen were significantly higher than KPN semen (50% vs. 15%, P<0.05). The rate of degenerated 2-cell embryos from sexed and KPN semen was 60.87% and 11.11%, respectively (p<0.05). In conclusion, these results indicate that superovulation using sexed semen was useful, but efficient embryo production was important to reducing the damage caused by the Flowcytometer-based sperm sorting procedure.