• The Journal of the Korea Contents Association
• /
• v.15 no.12
• /
• pp.572-585
• /
• 2015

The present study conducted in two parts toward employees in government office and state-owned companies, and financial companies. First, main impacts were demonstrated in the links between superior communication ability (SCA) and outcome variables (self-efficacy, and learning goal orientation). Second, mediating effects of self-efficacy and LGO were investigated in the relation SCA-Innovative behavior. The data which applied in analysis was collected from 318 employees who work at government office and state-owned companies, and financial companies in Jeju island. The results were as follows. First, SCA were positively associated with self-efficacy and LGO. Second, self-efficacy and LGO were fully mediated both relationships between SCA and innovative behavior. Findings were as follows. SCA is an important factor on self-efficacy and LGO. Such the results have meaningful implications in the research area of communication. The importance of self-efficacy and LGO were demonstrated when considering the both variable in the relations SCA-innovative behavior.

• Proceedings of the KIEE Conference
• /
• 2002.06a
• /
• pp.49-51
• /
• 2002

In this thesis, Josephson junction using high-Tc superconducting multi-layer thin film has been fabricated by on-axis RF magnetron sputtering method. And, the characterizations were performed by X-ray diffraction, SEM and the measuring system of critical current density. The physical properties of multi-layer superconducting thin films were also analyzed with the measured results. To fabricate the multi-layer superconducting thin films, the optimum partial pressure of Argon and Oxgen and the temperature of substrate were measured. Also, YBaCuO thin film was grown on MgO and $SrTiO_3$ substrates by rf-sputtering and LGO thin film of 30 A was epitaxially grown on the YBaCuO thin film as a josephson junction with the same condition. The schottky barrier at the contact surface between YBaCuO/LGO and YBaCuO/Au and the energy gap of 0.5 ${\sim}$ 0.6 mV in Nb were observed from the dI/dV-V of YBaCuO/LGO/Au/Nb and YBaCuO/Au/Nb.

• The Journal of the Korea Contents Association
• /
• v.18 no.1
• /
• pp.90-107
• /
• 2018

The purpose of this study is to specify a structural relationship among learning goal orientation(LGO), creativity, working smart, working hard, and work performance of salespersons, verify the direct and indirect effect of variables, and examine impacts of the five factors at the same time. Also, this carried out the study to understand the relationship between the salesperson's creativity and work performance. This study targeted for salespersons who were working in various industries and total 588 were participated via on-line. According to the study, the result is as follows. First of all, There are direct effects among LGO, creativity, working smart, and work performance. However, working hard didn't have any direct effect with any other variables. Creativity and working smart have indirect effects on the relationship between LGO and job performance. In addition, the mediating effect of the model with creativity was higher than that of the model without creativity. Therefore, creativity is an individual competency that should be continuously developed to improve the work performance of a salesperson.

• The Journal of the Korea Contents Association
• /
• v.19 no.5
• /
• pp.316-330
• /
• 2019

This study examines the effect of goal orientation (GO) on employee' self-esteem and organizational citizenship behavior (OCB). Also, this paper investigates the mediating effect of employee' self-esteem and the moderating effect of leader's ethical leadership. The results of this study targeted 1,656 employees working at company and public institution were as follows: First, we found that learning goal orientation (LGO) and performance prove goal orientation (PPGO) had a positive impact on employee' self-esteem. But performance avoid goal orientation (PAGO) was not directly related to self-esteem. Second, LGO and PPGO had a positive effect on employee' OCB. But PAGO was not related to OCB. Third, the mediating role of self-esteem in the relationship between GO variables (LGO, PPGO) and OCB was statistically significant. Finally, the interaction term of employee' GO (LGO, PPGO) and leader's ethical leadership was not related to OCB, whereas the positive link between PAGO and OCB was stronger when leader's ethical leadership was high. In particular, this study presented with implications for future research, limitations of this study.

• Progress in Superconductivity and Cryogenics
• /
• v.10 no.3
• /
• pp.5-8
• /
• 2008

On highly-textured IBAD-MgO templates, we have tried to find proper buffer layers among various candidate materials, including $LaMnO_3$ (LMO), $La_2Zr_2O_7$ (LAO), $LaAlO_3$ (LAO), $LaGaO_3$ (LGO), $NdGaO_3$ (NGO), and $BaZrO_3$ (BZO). All buffer layers were deposited on the IBAD-MgO templates by KrF pulsed laser deposition(PLD). LAO layer showed an armorphous phase. LZO, LGO, and NGO layers showed polycrystalline growth. Only LMO and BZO layers exhibited c-axis oriented biaxially textured films. Optimally processed LMO buffer layer at deposition temperature of $750^{\circ}C$ and $PO_2$ of 100mTorr exhibited ${\triangle}{\phi}$ value of ${\sim}-5.2^{\circ}$ and RMS roughness of 5.6nm. Interestingly, BZO buffer layers with ${\triangle}{\phi}$ values of ${\sim}-6^{\circ}$ could be routinely produced over a wide PLD processing condition.

• Korean Journal of Food Science and Technology
• /
• v.4 no.3
• /
• pp.200-205
• /
• 1972

Effects of several different petroleum fractions (LGO, HGO, VGO, Diesel oil, SP(E), HGO-wax, L/M-wax), stepwise addition of calculated amounts of HGO at defined intervals, recycling of spent media on cell growth of Candida tropicalis KIST 351 were studied using $2.5{\ell}$ fermenter by batch process. In addition, continuous cultivation of the yeast was also performed in the light of biomass production using $28{\ell}$ fermenter with LGO. 1) Cell concentration, yield on the basis of gas oil and n-paraffin with the petroleum fractions were in the range of $11{\sim}15g/{\ell}$, $10{\sim}12%$ and $77{\sim}82%$, respectively. 2) By stepwise addition of the gas oil, cell concentration and yield on the oil were increased up to 18.9 g/land 13%, respectively. 3) Spent medium slowed emulsifying ability of hydrocarbon and stimulating effect on the cell growth. Without additional supplementation of $Mg^{++}$ up to 20% of spent medium could be reused, while by adding of the $Mg^{++}$, 50% of medium could be recycled. 4) Optimum condition of continuous cultivation for biomass production was attained at the dilution rate of $D=0.1{\sim}0.125\;hr^{-1}$. Maximum yield coefficient on consumed n-paraffin was 0.94 at $D=0.1\;hr^{-1}$, however, 24% of supplied n-paraffin in the media was not utilized at this dilution rate.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.6
• /
• pp.761-768
• /
• 2009

GPS data acquired at CORS are widely and rapidly used in many application such as information technology industries. In acquisition of GPS data the establishment of standards of reliability and tolerance error range is necessary. This standards is regarded to contain the requirements of selection of using softwares, precise and broadcast ephemeris, duration of data acquisition, and etc. This study focused to present above standards of tolerance error. In long baseline GPS observation network the RMSE analysed in this study resulted little change when data acquired in 6-hour duration, but the less observation duration resulted less accuracy. Especially in 3-hour observation the accuracy of GPS data decreased rapidly. After analyses of data accuracy in the same observation condition using different computer program between academic and commercial purpose software, the RMSE of academic software resulted less than 1cm compared to 3 to 10cm from commercial software. RMSE analysis between precise ephemeris and broadcast ephemeris resulted similar quantity. Therefore this study regarded to present the reliable establishment of standards of error which can be used in required accuracy in GPS data observation.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.4
• /
• pp.473-482
• /
• 2013

The desulfurization ability of Sphingomonas subarctica T7b was evaluated using resting and immobilized cells with dibenzothiophene (DBT), alkyl DBTs, and commercial light gas oil (LGO) as the substrates. The resting cells of S. subarctica T7b degraded 239.2 mg of the initial 250 mg of DBT/l (1.36 mM) within 24 h at $27^{\circ}C$, while 127.5 mg of 2-hydroxybiphenyl (2-HBP)/l (0.75 mM) was formed, representing a 55% conversion of the DBT. The DBT desulfurization activity was significantly affected by the aqueous-to-oil phase ratio. In addition, the resting cells of S. subarctica T7b were able to desulfurize alkyl DBTs with long alkyl chains, although the desulfurization rate decreased with an increase in the total carbon number of the alkylated DBTs. LGO with a total sulfur content of 280 mg/l was desulfurized to 152 mg/l after 24 h of reaction. Cells immobilized by entrapment with polyvinyl alcohol (PVA) exhibited a high DBT desulfurization activity, including repeated use for more than 8 batch cycles without loss of biodesulfurization activity. The stability of the immobilized cells was better than that of the resting cells at different initial pHs, higher temperatures, and for DBT biodesulfurization in successive degradation cycles. The immobilized cells were also easily separated from the oil and water phases, giving this method great potential for oil biodesulfurization.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.9
• /
• pp.1021-1025
• /
• 1999

Near-infrared (NIR) spectroscopy has been successfully utilized for the rapid identification of six typical petroleum products such as light straight-run (LSR), naphtha, kerosine, light gas oil (LGO), gasoline, and diesel. The spectral features of each product were reasonably differentiated in the NIR region, and the spectral differences provided enough qualitative spectral information for discrimination. For discrimination, principal component analysis (PCA) combined with Mahalanobis distance was used to identify each petroleum product from NIR spectra. The results showed that each product was accurately identified with an accuracy over 95%. Most noticeably, LSR, kerosine, gasoline, and diesel samples were predicted with identification accuracy of 99%. The overall results ensure that a portable NIR instrument combined with a multivariate qualitative discrimination method can be efficiently utilized for rapid and simple identification of petroleum products. This is especially important when local at-site measurements are necessary, such as accidental petroleum leakage and regulation of illegal product blending.

• Journal of Yeungnam Medical Science
• /
• v.18 no.1
• /
• pp.123-137
• /
• 2001

Background: The purpose of this study is to evaluate the accuracy of measurements obtained from 3-dimensional computerized tomography and 3-dimensional cephalogram constructed by using the frontal and lateral cephalogram of six human dry skulls. Materials and Methods: After CT scans and each cephalograms were taken, 3-dimensional coordinates (X, Y, Z) of landmarks were obtained using computer programs. In this study, the accuracy of both methods were determined by means of 14 linear measurements compare with caliper measurements. Results: The standard deviation of landmarks of 3-dimensional CT and 3-dimensional cephalogram were 0.23 mm, and 0.30 mm in X axis, 0.27 mm and 0.25 mm in Y axis, and 0.27 mm and 0.31 mm in Z axis. In both methods, the standard deviation were less than 0.5 mm in all landmarks, and the most of landmarks showed less than 1 mm in range. Concerning the accuracy, the mean difference between 3-dimensional CT and manual measurements was 0.33 mm, and 1.13 mm between 3-dimensional cephalogram and manual measurements. The distance between RGo and LGo showed the largest difference (2.03 mm). There were highly significant, and large correlation with manual measurements in both methods (p<0.01). Conclusion: It is concluded that closeness of repeated measures to each skulls reveal the precision of both methods. Computerized tomography and cephalogram for 3-dimensional measurement of maxillofacial structure are equivalent in quality to caliper measurements.