• Fashion & Textile Research Journal
• /
• v.13 no.3
• /
• pp.425-431
• /
• 2011

The purpose of this study was to investigate washing effects according to the rinsing conditions and the characteristics of soiled fabrics. In this study rinsing conditions including rinsing cycle, time, temperature, and bath ratio were examined. The foamability of rinsing bath was also examined. The quantity of LAS in the rinsing bath and extracts of test fabrics was analyzed after washing and rinsing, respectively. The results of these experiments were as follows: The washing effects of soiled fabrics were varied from the kinds of soils and rinsing conditions. The removal of soils from fabrics was increased by the first rinsing after washing effectively. The priorities of rinsing conditions were rinsing temperature> rinsing time > rinsing cycles> references. Foamability was result from residual LAS in rinsing bath and fabrics extracts after rinsing. The residual quantity of LAS was references > rinsing cycles> rinsing time> rinsing temperature, which shown rinsing temperature was the most efficient factor of the rinsing performance.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.198-202
• /
• 2008

Refrigeration plants using absorption principles have been around for many years with initial development taking place over 100 years ago. Although the majority of absorption cycles are based on water-LiBr cycle, many applications exist where ammonia-water can be used, especially where lower temperatures are desirable. In both systems water is used as working fluid, but in quite different ways: as a solvent for the ammonia system, and as refrigerant for the lithium bromide system. This explains that the lithium bromide absorption system is strictly limited to evaporation temperatures above $0^{\circ}C$. The main industrial applications for refrigeration are in the temperature range below $0^{\circ}C$, the field for the binary system ammonia-water.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2015.11a
• /
• pp.80-80
• /
• 2015

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.5
• /
• pp.437-447
• /
• 2015

In this paper, implementation of an integrated transformer applicable to power supply units (PSUs) for a 150-W LED with a wide range of output voltage is presented. The transformer is comprised of a PFC inductor and an LLC resonant transformer, each of which is placed and integrated on an E-I-E-type magnetic core. Integrated transformers with two different air gap topologies (i.e., the side and center gap topologies) are considered in the design phase to investigate their applicability. The design consideration on the LLC resonant converter used for the wide-output-voltage control ranges is described, and the overall performance of the proposed system is verified through realization of it onto a 150-W LED PSU board.

• Journal of the Korean association of regional geographers
• /
• v.8 no.4
• /
• pp.529-541
• /
• 2002

This paper aims to provide a context-specific interpretation on the shifting process of in-house R&D spaces in a large Korean firm in the context of rapidly changing markets and technology. Drawing on the case study of LG Electronics Company, one of the Korea's flagship companies, I examine the causes and mechanisms leading to a shift in domestic R&D spaces and the nature of learning processes between R&D teams and between R&D and other organizational units, particularly manufacturing. It appears that the current reshaping processes of domestic R&D spaces in LGE focus more on the clustering of core R&D laboratories than the geographical integration of conception and execution. However, it should not simply be viewed that such a move would be reduced to the linear model of innovation and organizational learning. Instead, it involves the firm-specific mode of regulating organizational competences. As contextual variables to induce such a firm-specific mode of organizational change, I consider the spatial form of organization, the spatial sources of knowledge and learning, and the powers of relational learning that can be made between distanciated actors and teams.

• Journal of Communications and Networks
• /
• v.13 no.3
• /
• pp.257-265
• /
• 2011

In this paper, a cooperative relaying protocol called soft-decision-and-forward (SDF) with multiple antennas in each node is introduced. SDF protocol exploits the soft decision source symbol values from the received signal at the relay node. For orthogonal transmission (OT), orthogonal codes including Alamouti code are used and for non-orthogonal transmission (NT), distributed space-time codes are designed by using a quasi-orthogonal space-time block code. The optimal maximum likelihood (ML) decoders for the proposed protocol with low decoding complexity are proposed. For OT, the ML decoders are derived as symbolwise decoders while for NT, the ML decoders are derived as pairwise decoders. It can be seen through simulations that SDF protocol outperforms AF protocol for both OT and NT.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.483-490
• /
• 2019

Assessing the effect of forest fires and measuring the gas concentration around a fire has received little attention. Therefore, the concentrations of various gases in areas surrounding a fire need to be measured by the development of a suitable device. Unlike conventional portable devices, the AQS (Air Quality System) proposed in this paper is a portable instrument that measures five types of gases simultaneously, including CO, CO2, NOx, VOCs, and NH3, and has high durability through sensor protection algorithms. A PC-based program with an AQS connection was developed to monitor the real-time changes in the gas concentration. The reliability of the developed device was proven through a comparison of the results with other commercial gas analyzers. Measurements of the concentration due to indoor and outdoor fires were performed around a fire area to review the applicability and the predicted results were obtained.

• Journal of IKEEE
• /
• v.15 no.2
• /
• pp.129-133
• /
• 2011

A spread spectrum clock generation is an efficient way to reduce electro-magnetic interference (EMI) radiation in modern mixed signal chip systems. The proposed circuit generates the spread spectrum clock by directly injecting the modulation voltage into the voltage-controlled oscillator (VCO) current source for SATA II. The resulting 33KHz modulation profile has a Hersey-Kiss shape with a rounded peak. The chip has been fabricated using $0.18{\mu}m$ CMOS process and test results show that the proposed circuit achieves 0.509% (5090ppm) down spreading at 1.5GHz and peak power reduction of 10dB. The active chip area is 0.36mm ${\times}$ 0.49mm and the chip consumes 30mW power at 1.5GHz.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.7
• /
• pp.81-88
• /
• 2002

A new pattern generator of BIST based on the pattern clustering is developed. The proposed technique embeds a pre-computed deterministic test set with low hardware overhead for test-per-clock environments. The test control logic is simple and can be synthesized automatically. Experimental results for the ISCAS benchmark circuits show that the effectiveness of the new pattern generator compared to the previous methods.

• ETRI Journal
• /
• v.34 no.1
• /
• pp.35-43
• /
• 2012

This paper presents a delay-locked-loop-based clock and data recovery (CDR) circuit design with a nB(n+2)B data formatting scheme for a high-speed serial display interface. The nB(n+2)B data is formatted by inserting a '01' clock information pattern in every piece of N-bit data. The proposed CDR recovers clock and data in 1:10 demultiplexed form without an external reference clock. To validate the feasibility of the scheme, a 1.7-Gbps CDR based on the proposed scheme is designed, simulated, and fabricated. Input data patterns were formatted as 10B12B for a high-performance display interface. The proposed CDR consumes approximately 8 mA under a 3.3-V power supply using a 0.35-${\mu}m$ CMOS process and the measured peak-to-peak jitter of the recovered clock is 44 ps.