• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.679-686
• /
• 2013

In this paper, the new stability conditions for discrete systems with time-varying delay time are proposed by Lyapuniv theory for the stability analysis of NCS(Networked Control System) having data communication. The proposed stability conditions are very simple and easily calculated compared to the previous conditions having complex numerical calculations. The proposed results can include several previous works on the same issue. From the simulation results, the proposed conditions show the better performance and less conservative on checking stability compared with previous results.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.76-79
• /
• 2001

This paper is concerned with a stability analysis of Madam Type fuzzy systems. It Introduces the canonical form of an unforced fuzzy system and its stability theorem suggested in the previous study. Then it gives new simplified stability conditions based on the Lyapunov function method. A common positive definite matrix in the stability conditions is searched by the LMI method.

• International Journal of Concrete Structures and Materials
• /
• v.11 no.2
• /
• pp.377-389
• /
• 2017

Tests of the lateral and torsional stability are quite sensitive to the experimental conditions, such as support conditions and loading system. Controlling all of these conditions in a full-size test is a very challenging task. Therefore, in this paper, an experimental measurement method that can control the experimental conditions using a small-scale model was proposed to evaluate the lateral and torsional stability of beams. For this, a loading system was provided to maintain the vertical direction of the load applied to the beam, and a support frame was produced to satisfy the in-plane and out-of-plane support conditions. The experimental method using a small-scale model was applied successively to the lateral and torsional behavior and stability of I-shaped beams. The proposed experimental methods, which effectively accommodate the changes in the geometry and length of the beam, could contribute to further experimental studies regarding the lateral and torsional stability of flexural members.

• Korean Journal of Plant Resources
• /
• v.21 no.6
• /
• pp.435-439
• /
• 2008

Due to the fact that tocopherols and tocotrienols have antioxidant and anticancer properties, the commercial utilization of unsaponifiable fractions in rice bran is increasing. These nutraceutical compounds, however, are fairly unstable and readily break down when exposed to oxygen or lighting conditions. To compare the relative sensitivity of vit E isomers to heat and oxygen, concentrated unsaponifiable fractions extracted from crude rice bran oil were exposed to various temperature, oxygen (nitrogen-balanced), and bathing solvent conditions and resultant concentration changes in ${\alpha}$- and ${\gamma}$-tocopherols (T) and tocotrienols (T3) were evaluated. Each isomer exhibited different heat stability. Among them, ${\alpha}$-T3 degraded more rapidly compared to other vit E isomers while ${\alpha}$-T was the most stable isomer. Oxygen level also showed significant impact on each isomer's stability where severe reductions of ${\gamma}$-T (by 20%) and ${\gamma}$-T3 (by 29%) were observed under 2% oxygen conditions, while under 0% oxygen conditions no degradation could be observed even after exposure to $95^{\circ}C$ for 4 hours. When various blending solvents were mixed with concentrated unsaponifiable fractions, organic solvents such as isooctane and hexane were more effective in maintaining the stability of ${\gamma}$- T3 compared to edible oils, among which com oil was more efficient than soybean and rice bran oils.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.410-415
• /
• 2001

An analytical and numerical examination of second-order fractional-step methods and boundary condition for the incompressible Navier-Stokes equations is presented. In this study, the compatibility condition for pressure Poisson equation and its boundary conditions, stability, and numerical accuracy of canonical fractional-step methods has been investigated. It has been found that satisfaction of compatibility condition depends on tentative velocity and pressure boundary condition, and that the compatible boundary conditions for type D method and approximately compatible boundary conditions for type P method are proper for divergence-free velocity for type D and approximately divergence-free for type P method. Instability of canonical fractional-step methods is induced by approximation of implicit viscous term with explicit terms, and the stability criteria have been founded with simple model problems and numerical experiments of cavity flow and Taylor vortex flow. The numerical accuracy of canonical fractional-step methods with its consistent boundary conditions shows second-order accuracy except $D_{MM}$ condition, which make approximately first-order accuracy due to weak coupling of boundary conditions.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2213-2214
• /
• 2011

It is important to consider power stability in case of design and construction of a substation at railroad because a train is operated by electricity and tains are drived simultaneous at the same section. This paper described stability of feeder system considering driving conditions and railroad conditions of train which is drived. Simulation tool, TOM(Train Operations Model) software is used to ensure stability of feeder system. As results of simulation, feeder voltage source is in limits on driving operation dia of trains.

• Food Engineering Progress
• /
• v.21 no.1
• /
• pp.49-56
• /
• 2017

Vegetable seed oils (VSOs) have been extracted and used not only as ingredients in food and as sources of dietary lipids, but also as sources of nutraceuticals used to overcome the various oxidative stresses that contribute to the development of diseases, including cancer and other chronic conditions. The chemical compositions and oxidative stabilities of various VSOs were therefore investigated; samples were stored for 35 d, with each oil having been tested under $O_2$ exposure, sealed from $O_2$ exposure and sealed from $O_2$ exposure while containing $O_2$ scavengers. Oxidative stability was evaluated by peroxide value (POV), p-anisidine value (p-AnV), iodine value (IV), and thiobarbituric acid (TBA) value. Perilla seed and flaxseed oil were mostly composed of linolenic acid (45.5% and 59.7%, respectively), whereas pine seed oil was mostly composed of linoleic acid (48.3%). Meanwhile, camellia seed and olive oils contained 80% oleic acid, which correlated strongly with oxidative stability. The POV, p-AnV, and TBA values were the highest under $O_2$ exposure, and the lowest in the presence of $O_2$ scavengers. These results indicate that VOS oxidative stability depends not only on storage conditions, but on unsaturated fatty acid profiles as well.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.1
• /
• pp.127-136
• /
• 2017

This paper investigates improved stability and stabilization criteria for sampled-data control systems. By using a suitable and newly constructed augmented Lyapunov-Krasovskii functional and some recent mathematic techniques such as auxiliary function-based integral inequalities, sufficient conditions for stability and stabilization conditions are derived within the framework of linear matrix inequalities(LMI) form. The superiority and validity of the proposed results are illustrated by three numerical examples.

• Geomechanics and Engineering
• /
• v.33 no.5
• /
• pp.463-475
• /
• 2023

Tunnel construction activity, conducted mainly in mountains and within urban centres, causes soil settlement, thus requiring the relevant management of slopes and structures as well as evaluations of risk and stability. Accordingly, in this study we performed a three-dimensional finite element analysis to examine the behaviour of piles and pile cap stability when a tunnel passes near the bottom of the foundation of a pile group connected by a pile cap. We examined the results via numerical analysis considering different conditions for reinforcement of the ground between the tunnel and the pile foundation. The numerical analysis assessed the angular distortion of the pile cap, pile settlement, axial force, shear stress, relative displacement, and volume loss due to tunnel excavation, and pile cap stability was evaluated based on Son and Cording's evaluation criterion for damage to adjacent structures. The pile located closest to the tunnel under the condition of no ground reinforcement exhibited pile head settlement approximately 70% greater than that of the pile located farthest from the tunnel under the condition of greatest ground reinforcement. Additionally, pile head settlement was greatest when the largest volume loss occurred, being approximately 18% greater than pile head settlement under the condition having the smallest volume loss. This paper closely examines the main factors influencing the behaviour of a pile group connected by a pile cap for three ground reinforcement conditions and presents an evaluation of pile cap stability.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.357.1-357.1
• /
• 2014

Superhydrophobic WOx nanowire (NW) arrays were fabricated using a thermal evaporation and surface chemistry modification methods by self-assembled monolayer (SAM). As-prepared non-wetting WOx NWs surface shows water contact angle of $163.2^{\circ}$ and has reliable stability in underwater conditions. Hence the superhydrophobic WOx NWs surface exhibits silvery surface by total reflection of water layer and air interlayer. The stability analysus of underwater superhydrophobicity of WOx NWs arrays was conducted by changing hydrostatic pressure and surface energy of WOx NWs arrays. The stability of superhydrophobicity in underwater conditions decreased exponentially as hydrostatic pressure applied to the substrates increased3. In addition, as surface energy decreased, the underwater stability of superhydrophobic surface increased sharply. Specifically, sueprhydrophobic stability increased exponentially as surface energy of WOx NWs arrays was decreased. Based on these results, the models for explaining tendencies of superhydrophobic stability underwater resulting from hydrostatic pressure and surface energy were designed. The combination of fugacity and Laplace pressure explained this exponential decay of stability according to hydrostatic pressure and surface energy. This study on fabrication and modeling of underwater stability of superhydrophobic W18O49 NW arrays will help in designing highly stable superhydrophobic surfaces and broadening fields of superhydrophobic applications even submerged underwater.