• 제목/요약/키워드: LED traffic light

검색결과 52건 처리시간 0.029초

Performance of CSK Scheme for V2I Visible Light Communication

  • Kim, Hyeon-Cheol;Kim, Byung Wook;Jung, Sung-Yoon
    • 한국통신학회논문지
    • /
    • 제40권3호
    • /
    • pp.595-601
    • /
    • 2015
  • These days, research related to Intelligent Transportation System (ITS) technology is being widely considered. ITS is inevitable for future transportation systems to reduce accidents, congestion, and offer a smooth flow of traffic. The use of Visible Light Communication (VLC) in ITS systems has been considered widely because of its EMC/EMI free and LED infrastructure reusable properties. Among the VLC schemes, this study analyzed the performance of the Color Shift Keying (CSK) scheme under a Vehicle-to-Infrastructure (V2I) downlink scenario to verify the capability of CSK as a communication tool for ITS. By modeling daylight noise using the modified Blackbody radiation model, this study examined the performance of V2I VLC under daytime conditions. The relationship between BER, the communication distance, and the amount of ambient-light noises under the pre-described V2I scenario were determined by simulations.

발광형 교통안전표지용 청색 OLED의 특성분석에 관한 연구 (A Study on the Characteristic Analysis of Blue OLED for the Luminous Traffic Safety Mark)

  • 강명구;김중연;오환술
    • 한국ITS학회 논문지
    • /
    • 제6권2호
    • /
    • pp.138-145
    • /
    • 2007
  • 발광형 교통안전표지는 안개가 잦은 곳, 야간 교통사고가 많이 발생하거나 발생가능성이 높은 곳, 도로의 구조로 인하여 가시거리가 충분히 확보되지 않은 곳 등과 같은 장소에서 제한적으로 사용하도록 규정 되었다. 현재 발광형 교통안전표지는 LED가 사용되고 있으나, 향후 새로운 교통안전표지용으로 유기발광다이오드를 제안하였다. 소자의 구조는 $ITO/2-TNATA(500{\AA})/{\alpha}-NPD(200{\AA})/DPVBi(300{\AA})/BCP(10{\AA})/Alq3(200{\AA})/LiF(10{\AA})/Al:Li(1000{\AA})$로 하였다. 인가전압 10 V에서 전류밀도는 $240.71mA/cm^2$, 휘도는 $10,550cd/m^2$, 발광효율은 3.53cd/A이었다. $N_2$ 가스가 주입된 플라즈마로 전처리한 ITO 표면을 갖는 소자가 플라즈마 전처리되지 않은 ITO 표면을 갖는 소자보다 특성이 향상되었다. EL 스펙트럼의 최대 발광 파장은 456nm이었고 색좌표값은 x=0.1449, y=0.1633으로 NTSC 색좌표 Deep blue 영역(x=014, y=0.08)에 근접한 순수한 청색에 가까운 값을 얻었다.

  • PDF

Automotive Adaptive Front Lighting Requiring Only On/Off Modulation of Multi-array LEDs

  • Lee, Jun Ho;Byeon, Jina;Go, Dong Jin;Park, Jong Ryul
    • Current Optics and Photonics
    • /
    • 제1권3호
    • /
    • pp.207-213
    • /
    • 2017
  • The Adaptive Front-lighting System (AFS) is a part of the active safety system, providing optimized vision to the driver during night time and other poor-sight conditions of the road by automatic adaptation of lighting to environmental and traffic conditions. Basically, an AFS provides four different modes of the passing beam as designated in an United Nations Economic Commission for Europe regulation (ECE324-R123): neutral state or country light (Class C), urban light (Class V), highway light (Class E), and adverse weather light (Class W). In this paper, we first present an optics design for an AFS system capable of producing the Class C/V/E/W patterns requiring only on/off modulation of multi-array LEDs with no need for any additional mechanical components. The AFS optics consists of two separated modules, cutoff and spread; the cutoff module lights a narrow central area with high luminous intensity, satisfying the cutoff regulation, and the spread module forms a wide spread beam of low luminous intensity. Each module consists of two major parts; the first converts a discretely positioned LED array into a full-filled area emitting light source plane, and the second projects the light source plane to a 25 m away target plane. With the combination of these two optics modules, the four beam patterns are formed by simple on/off modulation of multi-array LEDs. Then we report the development of a prototype that was demonstrated to provide the four beam patterns.

교통 신호등 자동 제어시스템 (Traffic Signal Automatic Control System)

  • 최덕규;윤승목;김태성
    • 한국컴퓨터정보학회:학술대회논문집
    • /
    • 한국컴퓨터정보학회 2020년도 제61차 동계학술대회논문집 28권1호
    • /
    • pp.163-164
    • /
    • 2020
  • 교통 신호등 자동 제어시스템 기술은 교통 체증 현상을 방지하고 횡단 보도를 건너는 보행자들의 안전을 목적으로 시작되었다. 이는 1가구당 2차량에 가까운 보급률을 보이고 있는 현대 사회에 불가피하게 생기는 문제인데 본 연구에서는 이러한 문제로 인한 교통 신호등 자동 제어시스템 기술을 적용하고자 한다. 사거리에서 운전을 하다 보면 차량이 많이 지나가는 차선이 있는 반면 비교적 차량이 많이 지나가지 않는 차선들을 볼 수 있다. 이런 경우 차량이 많은 차선은 신호시간 내 차량이 모두 지나가지 못해서 교통체증이 발생하게 된다. 교통 체증을 최소화하기 위해서 압력 센서를 설치하여 차량이 많이 정체 되고 있는 차선에 신호의 시간을 증가시켜주고 차량이 많이 없는 차선은 기본 신호의 시간을 주어 차량이 많이 있는 차선의 차들의 교통 체증을 해소시켜 준다. 그리고 차량이 많이 지고 스마트폰의 보급이 많아지다 보니 횡단 보도에서 스마트폰을 보고있다 횡단 보도에서 사고를 당하는 경우 증가하고 있다. 이러한 보행자들을 위해 횡단 보도의 신호가 초록불이 되었을 때 간단한 음악이 나오고 발 밑에 횡단 보도 신호등과 같은 색깔이 나오게 하는 LED를 설치한다. 이렇게 하여 초록불이 들어왔다는 것을 보행자들에 인식시켜 보행자들의 안전을 지킬 수 있다.

  • PDF

어린이 보호를 위한 전자제어 신호등의 구현 (Implementation of Electronically Controlled Traffic Light for Child Protection)

  • 박명철;박주렬;이동규;김명기;이기훈;유주영;이상협;박민우
    • 한국컴퓨터정보학회:학술대회논문집
    • /
    • 한국컴퓨터정보학회 2021년도 제63차 동계학술대회논문집 29권1호
    • /
    • pp.169-170
    • /
    • 2021
  • 기존 신호등은 보행자를 위한 별도의 안전장치가 없다. 이는 어린아이는 물론 성인들까지 차량의 위협으로부터 안전을 보장받을 수 없다. 본 연구에서는 어린이보호구역에서 사고 발생률을 감소시키는 것을 전제로 아두이노 액추에이터와 스위치를 이용한 전자제어 신호등을 적용하고자 한다. 현재의 신호등 시스템은 단순히 시간의 흐름에 따라 보행자 신호등과 차량용 신호등의 led가 자동으로 변화하여 차량과 보행자를 통제한다. 이러한 시스템은 어린아이들의 돌발행동과 운전자의 미숙한 작동으로 인한 사고를 방지하지 못한다. 본 논문은 이러한 문제점들을 개선하기 위해 기존의 신호등 시스템 대신 스위치와 액추에이터, 초음파 센서, 블루투스 모듈을 적용한 어린이용 보호 전자제어 신호등 기술을 제안한다. 기존의 신호등 시스템과는 다르게 보행자의 직접적인 개입을 통해 시스템을 제어하고, 원활한 교통환경을 만들 수 있다.

  • PDF

Formation of Plasma Damage-Free ITO Thin Flims on the InGaN/GaN based LEDs by Using Advanced Sputtering

  • Park, Min Joo;Son, Kwang Jeong;Kwak, Joon Seop
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.312-312
    • /
    • 2013
  • GaN based light emitting diodes (LEDs) are important devices that are being used extensively in our daily life. For example, these devices are used in traffic light lamps, outdoor full-color displays and backlight of liquid crystal display panels. To realize high-brightness GaN based LEDs for solid-state lighting applications, the development of p-type ohmic electrodes that have low contact resistivity, high optical transmittance and high refractive index is essential. To this effect, indiumtin oxide (ITO) have been investigated for LEDs. Among the transparent electrodes for LEDs, ITO has been one of the promising electrodes on p-GaN layers owing to its excellent properties in optical, electrical conductivity, substrate adhesion, hardness, and chemical inertness. Sputtering and e-beam evaporation techniques are the most commonly used deposition methods. Commonly, ITO films on p-GaN by sputtering have better transmittance and resistivity than ITO films on p-GaN by e-bam evaporation. However, ITO films on p-GaN by sputtering have higher specific contact resistance, it has been demonstrated that this is due to possible plasma damage on the p-GaN in the sputtering process. In this paper, we have investigated the advanced sputtering using plasma damage-free p-electrode. Prepared the ITO films on the GaN based LEDs by e-beam evaporation, normal sputtering and advanced sputtering. The ITO films on GaN based LEDs by sputtering showed better transmittance and sheets resistance than ITO films on the GaN based LEDs by e-beam evaporation. Finally, fabricated of GaN based LEDs by using advanced sputtering. And compared the electrical properties (measurement by using C-TLM) and structural properties (HR-TEM and FE-SEM) of ITO films on GaN based LEDs produced by e-beam evaporation, normal sputtering and advanced sputtering. As a result, It is expected to form plasma damage free-electrode, and better light output power and break down voltage than LEDs by e-beam evaporation and normal sputter.

  • PDF

Absorption properties and size distribution of aerosol particles during the fall season at an urban site of Gwangju, Korea

  • Park, Seungshik;Yu, Geun-Hye
    • Environmental Engineering Research
    • /
    • 제24권1호
    • /
    • pp.159-172
    • /
    • 2019
  • To investigate the influence of pollution events on the chemical composition and formation processes of aerosol particles, 24-h integrated size-segregated particulate matter (PM) was collected during the fall season at an urban site of Gwangju, Korea and was used to determine the concentrations of mass, water-soluble organic carbon (WSOC) and ionic species. Furthermore, black carbon (BC) concentrations were observed with an aethalometer. The entire sampling period was classified into four periods, i.e., typical, pollution event I, pollution event II, and an Asian dust event. Stable meteorological conditions (e.g., low wind speed, high surface pressure, and high relative humidity) observed during the two pollution events led to accumulation of aerosol particles and increased formation of secondary organic and inorganic aerosol species, thus causing $PM_{2.5}$ increase. Furthermore, these stable conditions resulted in the predominant condensation or droplet mode size distributions of PM, WSOC, $NO_3{^-}$, and $SO{_4}^{2-}$. However, difference in the accumulation mode size distributions of secondary water-soluble species between pollution events I and II could be attributed to the difference in transport pathways of air masses from high-pollution regions and the formation processes for the secondary chemical species. The average absorption ${\AA}ngstr{\ddot{o}}m$ exponent ($AAE_{370-950}$) for 370-950 nm wavelengths > 1.0 indicates that the BC particles from traffic emissions were likely mixed with light absorbing brown carbon (BrC) from biomass burning (BB) emissions. It was found that light absorption by BrC in the near UV range was affected by both secondary organic aerosol and BB emissions. Overall, the pollution events observed during fall at the study site can be due to the synergy of unfavorable meteorological conditions, enhanced secondary formation, local emissions, and long-range transportation of air masses from upwind polluted areas.

머신비전 기반 보행신호등 검출 기능을 갖는 보행등 구현 (Implementation of a walking-aid light with machine vision-based pedestrian signal detection)

  • 구지훈;이주성;조홍래;안호명
    • 한국정보전자통신기술학회논문지
    • /
    • 제17권1호
    • /
    • pp.31-37
    • /
    • 2024
  • 본 연구에서는 컴퓨팅 자원이 제한된 환경에서도 효율적으로 동작 가능한 머신비전 기반의 보행자 신호 검출 알고리즘을 제안하였다. 이 알고리즘은 제한된 자원에서도 높은 효율성을 발휘하며, 주변 조명 등의 영향을 최소화하기 위해 HSV 색공간 기반의 영상처리, 이진화, 모폴로지 연산, 라벨링 등의 단계를 순차적으로 적용하여 빛 번짐과 같은 현상에 대응할 수 있도록 설계되었다. 특히, 이 알고리즘은 비교적 단순한 형태로 구성되어 임베디드 시스템 환경에서 부담 없이 동작할 수 있도록 고려되었다. 이를 통해 낮은 컴퓨팅 자원을 보유한 환경에서도 안정적으로 작동할 수 있는 구조를 갖췄다. 또한, 제안된 보행등은 보행신호 검출 기능뿐만 아니라 IoT 기능을 탑재하여 무선으로 웹서버와 연동되는 기능을 갖췄다. 이에 따라 보행등 설치자 및 제어권자들은 웹 서버를 통해 신호등의 상태를 모니터링하고 제어할 수 있는 편의성을 제공받을 수 있다. 더불어, 50W급 LED 보행등을 효과적으로 제어할 수 있는 구현이 완료되었다. 이러한 제안된 시스템은 자원 제한 환경에서의 신속하고 효율적인 보행자 신호 검출 및 제어 시스템으로, 실제 도로 환경에서의 적용 가능성을 고려하고 있다. 이를 통해 보다 안전하고 지능적인 도로 교통 시스템의 구축에 기여할 것으로 기대된다.

신호등 인식 성능 향상을 위한 쿠버네티스 기반의 프레임워크: YOLOv5와 Visual Attention을 적용한 C-RNN의 융합 Vision AI 시스템 (Kubernetes-based Framework for Improving Traffic Light Recognition Performance: Convergence Vision AI System based on YOLOv5 and C-RNN with Visual Attention)

  • 조형서;이민정;한연지
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2022년도 추계학술발표대회
    • /
    • pp.851-853
    • /
    • 2022
  • 고령화로 인해 65세 이상 운전자가 급증하며 고령운전자의 교통사고 비율이 증가함에 따라 시급한 사회 문제로 떠오르고 있다. 이에 본 연구에서는 객체 검출, 인식 모델을 결합하고 신호등을 인식하여 Text-To-Speech(TTS)로 알리는 쿠버네티스 기반의 프레임워크를 제안한다. 객체 검출 단계에서는 YOLOv5 모델들의 성능을 비교하여 활용하였으며 객체 인식 단계에서는 C-RNN 기반의 attention-OCR 모델을 활용하였다. 이는 신호등의 내부 LED 영역이 아닌 이미지 전체를 인식하는 방식으로 오탐지 요소를 낮춰 인식률을 높였다. 결과적으로 1,628장의 테스트 데이터에서 accuracy 0.997, F1-score 0.991의 성능 평가를 얻어 제안한 프레임워크의 타당성을 입증하였다. 본 연구는 후속 연구에서 특정 도메인에 딥러닝 모델을 한정하지 않고 다양한 분야의 모델을 접목할 수 있도록 하며 고령 운전자 및 신호 위반으로 인한 교통사고 문제를 예방할 수 있다.

초경량 무인비행장치 조종자의 교육환경 만족도가 안전의식에 미치는 영향 : DREEM 모형을 포함하여 (The Effect on Safety Perception with Ultra Light UAV Pilot's Educational Environment Satisfaction : Including the DREEM Model)

  • 정형훈;김기웅;최연철
    • 한국항행학회논문지
    • /
    • 제23권2호
    • /
    • pp.114-124
    • /
    • 2019
  • 2016년 1월 다보스포럼에서 발표된 4차 산업혁명에 대한 다양한 기술 적용 분야의 하나로서 무인비행장치인 드론 시장은 미래의 교통체계의 커다란 변화와 관련된 중요한 분야로 급속하게 확대 발전되고 있다. 한국의 경우 드론에 대한 관심은 국가자격증의 폭발적인 수요로 연계되고 있으며 드론조종자 수도 2015년 400여명에서 2018년 기준 17,000여명을 초과하면서 교육환경과 안전의 중요성이 강조되고 있다. 따라서 본 연구에서는 드론교육 현황과 함께 교육환경 평가를 위해 설계된 DREEM(Dundee ready educational environment measure) 모형에 근거하여 조종자의 안전의식을 분석하였다. 연구결과 교육 환경에 대한 만족도가 절차 준수를 포함한 전반적인 안전의식에 영향을 주므로 이에 대한 개선이 요구된다는 결론을 도출하였다.