• 한국광학회지
• /
• 제24권1호
• /
• pp.29-38
• /
• 2013

본 논문에서는 점광원을 기준으로 설계된 자유 형상 렌즈(freeform lens)의 조명 성능과 LED 광원 크기와의 관계 및 공차 특성을 살펴보았다. 비교를 위해 발산 조명 모델(divergent illumination model)을 적용한 두 가지 렌즈와 중첩 조명 모델(overlapped illumination model)을 적용한 한가지 렌즈를 설계하였다. LED 광원이 커짐에 따라 평균 조도에 비해 조도 균일도가 상대적으로 크게 감소하였으며, 정렬 오차에 의한 성능 저하는 거의 발생하지 않았다. 하지만 LED 광원의 방출 특성 변화는 LED 광원 크기에 관계없이 조명 성능에 영향을 미치는 것으로 확인하였다. 발산 조명 모델로 설계된 렌즈가 전반적으로 우수한 성능을 보였지만, LED 방출 특성 변화에 대해서는 중첩 조명 모델로 설계된 렌즈의 성능이 상대적으로 적게 변화함을 알 수 있었다.

• 한국버섯학회지
• /
• 제12권4호
• /
• pp.375-378
• /
• 2014

양송이버섯 재배지에서 LED 광원의 파장에 따른 큰검점버섯파리(Lycoriella ingenua)의 유인력을 조사하였다. 시험은 용인과 부여의 양송이 재배지에서 수행되었으며, LED 광원은 백색광, 녹색광, 적색광, 청색광, 황색광을 이용하였다. LED 광원 파장별 버섯파리 유인수는 용인과 부여에서 백색광 132.9마리, 3,272.5마리, 녹색광 120.3마리, 3,109.5마리, 적색광 105.5마리, 1,910.1마리, 청색광 88.3마리, 2,708.3마리, 황색광 46.7마리, 2,465.6마리였다. LED 광원들은 무처리와 비교하여 2.7~3.5배 더 많은 큰 검정버섯파리가 유인되었다.

• 한국수산과학회지
• /
• 제39권6호
• /
• pp.480-486
• /
• 2006

The radiation characteristics of a high-luminance light-emitting diode (LED) light source were studied to evaluate its potential as an energy-saving light source for fishing lamps. The angle of the LED light source with 50% illuminance was $8-15^{\circ}$, and it had strong directional characteristics. The wavelengths at which the radiance and irradiance were maxima were 709, 613, 473, 501, 525, and 465 nm for red, orange, blue, peacock blue, green, and white light, respectively. The underwater transmission characteristics of the LED light source were superior in the order blue, white, peacock blue, and green in optical water type I: blue, peacock blue, white, and green in optical water type II; and blue, peacock blue, green, and white in optical water type III. Setting the underwater transmission characteristics of the LED light source in optical water type I at 100%, the transmission of water types II and III decreased to 67 and 17%, respectively. Based on the underwater transmission characteristics calculated in optical water types I-III, the blue and peacock blue LED light sources can be used as an energy-saving light source for fishing lamps.

• 한국생산제조학회지
• /
• 제20권4호
• /
• pp.452-457
• /
• 2011

The internal temperature of an operating room had to keep within $20^{\circ}C$. However, the doctor who is wearing operating gown and mask caused to rise temperature because of the thermal occurrence of dental LED light source. At first, the surgery environment is getting worse. And then last, it would increase bleeding rate by the expansion of patient's exposured blood vessel. A surgical operator can distribute the patient's tissue through such surgery environment, exactly. It can do accurate surgery. So, it gave to effect that surgical operator's eye condition is getting better and it could keep a mutual assistance system. For this research, we develop the LED dental light source module of high color rendition. It performed simulation for replacing established the method of Halogen lamp and Plazma lamp of light source. We analyzed intensity of illumination and the change of viability by changing the height of light source module.

• 청정기술
• /
• 제16권2호
• /
• pp.88-94
• /
• 2010

참다래(‘헤이워드’) 과실을 저온 및 상온 저장 중에, 여러 다른 파장의 light emitting diode (LED) 광원을 조사한 후 과실의 경도, 당도 및 산함량의 변화를 분석하였다. 과실 경도는 $4^{\circ}C$보다 $25^{\circ}C$에서 크게 감소하였고, 1주 동안 LED 파장을 조사했을 때, 440 nm와 660 nm의 LED 광원을 처리한 참다래가 암실처리 보다 경도가 높게 유지되었고 380 nm UV등과 470 nm 백색 LED를 처리한 과실은 암실의 조건에 비하여 경도가 낮게 조사되었다. 밀봉을 한 참다래는 공기 중에 개방된 참다래보다 모든 처리구에서 경도가 더 높았다. 당도는 $25^{\circ}C$에서 공기 중에 개방한 경우, 470 nm 백색 LED 처리구에서는 낮게 나타났으나 암조건과 380nm UV등 처리에서는 $15^{\circ}$Brix 이상을 나타내었다. 참다래 과실의 산함량은 660 nm 적색 LED 처리구에서 52% 감소하였다. 밀봉된 참다래에서 440 nm 청색 LED, 470 nm 백색 LED, 660 nm 적색 LED 광원을 처리하였을 때, 암실에 놓여진 참다래보다 산함량이 각각 52.6, 55.6 및 52.8% 감소하였다. 참다래에 대한 다양한 파장의 LED 조사효과 중에서, 산함량의 감소는 향후 참다래 과실의 수확 후 후숙기간을 조절하는데 활용될 수 있을 것이다. LED 광원은 정확하고 매우 좁은 영역의 파장을 적은 용량의 전력 소모량으로 구현하기 때문에 대표적인 청정 기술로 분류되며, 이러한 LED 광원을 이용한 참다래 과실의 산도 조절은 기존의 에틸렌 등의 화학물 처리보다 안전한 친환경 과실을 생산할 수 있는 청정기술이라 평가된다.

• 한국전기전자재료학회논문지
• /
• 제26권2호
• /
• pp.158-163
• /
• 2013

In this paper, thermal analysis of heatsink for 30 W class Chip-on-Board (COB) LED light source is performed by using SolidWorks Flow Simulation package. In order to increase the convection heat transfer, number of fin and shape of the heatsink is optimized. Furthermore, a copper spread is applied between the COB LED light source and the heatsink to mitigate the heat concentration on the heatsink. With the copper spread, the junction temperature between the COB LED light source and the heatsink is $50.9^{\circ}C$, which is $5.4^{\circ}C$ lower than the heatsink without the copper spread. Due to the improvement of the junction temperature, the light output is improved by 5.8% when the LED light source is stabilized. The temperature difference between the simulation and measured result of the heatsink with the copper spread is within $2^{\circ}C$, which verifies the validity of the thermal design method using a simulation package.

• 한국정보통신학회논문지
• /
• 제19권4호
• /
• pp.954-964
• /
• 2015

본 연구는 균일한 조명을 얻기 위해 자유 형상 렌즈(freeform lens)를 제작하였으며, 이를 위해 중첩 조명 모델(overlapped illumination model)을 제안하였고, 제작한 LED 렌즈들의 특성을 분석하였다. 제작한 렌즈는 LED 빛 세기 분포의 중심 방향, 반치각 (half angle) 및 LED 광원의 위치변화를 바탕으로 그 성능을 평가하였다. 아울러 조명영역은 평균 조도 (average illuminance)와 조도 균일도 (illuminance uniformity) 변화 값으로 수행하였다. 광도 분포의 중심 방향 변화에 대해서는 제안된 모델과 발산 모델이 대체로 비슷한 공차 특성을 보였으며, 특히 제작한 렌즈에서 반치각 변화는 기존 방법에 비해 조도 균일도 공차 특성은 현저히 개선됨을 확인하였다.

• 조명전기설비학회논문지
• /
• 제29권5호
• /
• pp.26-33
• /
• 2015

Secondary optical system designed for LED bulb which emits light in all directions was simulated with Energy Star standards. Components of the optical system were LED light source, the cover of the LED bulb and reflector which is to confirm the diffuser plate and LightTools software was used to design the illumination optics. The main points of the secondary optical system design are the location of the LED light source, the shape of the LED bulb cover, the location of the reflection plate, and the scattering properties of the diffusing plate. Mechanism of the LED bulb is that the light emitted from the light source move on to the backward after reflected by the coated light cover from the inside and then the reflected light is scattered by the diffuser plate. The LED bulb was designed to satisfy the standard light distribution and color specifications of the Energy Star(IES LM-79-08).

• 반도체디스플레이기술학회지
• /
• 제22권2호
• /
• pp.1-5
• /
• 2023

In the past, display devices have undergone many changes, such as plasma TVs and LCDs, and have continued to develop. Recently, new display technologies, such as Organic Light Emitting Diode displays and Inorganic Light Emitting Diode displays, have been developed. Among them, Micro LED displays have the potential to improve performance more than LCDs and OLEDs, but a lot of effort and time are needed until the mass production technology (transfer and bonding) of Micro LED displays is developed. We have developed a new Micro LED display light source that can be produced using existing transfer and bonding process technologies to enable faster commercialization of Micro LED in the industry. This light source is TFT deposition on LED. TFT deposition on LED has the advantage of being able to produce displays using existing process technology, making early commercialization of display application products possible. In this study, we applied the Active Driving method to verify the performance of TFT deposition on LED as a display to determine its commercialization potential. Additionally, to facilitate faster application of Micro LED in the industry, we applied TFT deposition on LED to Optical Wireless Communication systems, which are widely used in application service areas such as safety/security and sensors, to verify its communication performance. The experimental results confirmed that TFT deposition on LED is not only capable of AM driving but can also be applied to OWC systems.

• 수산해양교육연구
• /
• 제29권2호
• /
• pp.552-559
• /
• 2017

To assess the effect of LED lights on marine microalgae growth in the laboatory, Tetraselmis suecica, Chaetoceros simplex and Isochrysis galbana were cultured under $20{\pm}1^{\circ}C$, Walne's medium and aeration using 3.6 L glass vessels. The LED light sources were Blue, Red, Blue+Red, CoolWhite and WarmWhite. The experiments were conducted three times. The density of microalgae was shown as the counted number of cells per day, and the specific growth rate was calculated by using the density. The statistical analysis was performed by analysis of variance using the SPSS 20.0 program. T. suecica culture was the highest density under the Blue LED light source, so the light source was the most effective for the growth of this alga. C. simplex and I. galbana culture had the highest density under the Blue+Red LED light source, therefore this light source was the most effective for the growth of these algae. The result of analysis of variance showed significant between groups.