• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05e
• /
• pp.100-103
• /
• 2003

고휘도 LED(light emitting diode) 빨강(R), 녹색(G), 파랑(B), 호박색(A), 백색(W) 등의 중요한 광학특성인 광속(luminous flux), 효율(luminous efficacy), 피크 파장(peak wavelength), 가중치 평균 파장(weighted average wavelength), 반치폭 (full width at ha1f maximum), 색도좌표(chromaticity coordinate), 주 파장(dominant wavelength), 자극순도 (excitation purity) 와 휘도순도(colorimetric purity)에 대해서 비교검토하였다. 시험결과로 제시된 LED의 기본적인 특성 데이터는 추후, 새로운 조명용 LED 램프나 등기구(luminaire)를 개발 및 특성연구에 많은 도움을 줄 것으로 사료된다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.201-203
• /
• 2009

RGBY LED PKG를 이용하여 무대 사용을 위한 100W 급 LED 조명기구를 설계하고 무대에 적용하였을 때의 조명 환경을 예측, 분석 하였다. 이를 위하여 색온도 및 광색가변에 적합한 4 in 1 LED Package를 선정하고, 이를 이용하여 광원모듈을 구성하였으며, 또한 무대조명에 적용하기 위한 렌즈를 제작하였다. 이러한 LED 조명기구를 또한 무대조명에 적용하여 조명상황을 시뮬레이션 하고 무대 또는 객석에서의 평균조도 및 조도균제도 등을 계산하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.99-102
• /
• 2009

Fixture 일체형 LED 다운라이트(Downlight)의 광 효율 향상을 위하여 LED 장착위치 및 Reflector 길이, 히트싱크(Heat sink) 형태에 따른 광도(luminous intensity)와 기구효율(luminaire efficiency)을 시뮬레이션을 통하여 비교분석 하였다. 또한 히트싱크의 방열 설계를 시뮬레이션 하고 상용 LED 패키지 (Cree, XP-E P4)를 사용하여 시제품을 제작 하여 그 성능을 평가하였다. 그 결과 광속 9661m, 상관 색온도(CCT) 3,060K, 연색지수(CRI) 82의 광 특성을 갖는 LED 다운라이트를 개발하였다.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.06a
• /
• pp.186-186
• /
• 2011

This paper presents the design guide of a LED red-light for naval vessels. Power consumption, luminous flux and optical characteristics of a conventional FL red-light were analyzed. Spectrum of the red-light is in ranges of 600~780 [nm]. Power consumption and luminous efficacy are 26.9 [W] and 1.1 [lm/W], respectively. From the experimental results, we proposed a 5 [W] LED red-light which save power consumption by 80 [%] and increase luminous flux over 500 [%].

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.1
• /
• pp.15-21
• /
• 2015

The purpose of this paper is to analyze thermal characteristics of the heat sinks to maximize the thermal diffusivity for LED floodlight. The 2 kind of samples were prepared by vapor chamber manufacturing technology using the heat pipe principle. It was analyzed the maximum temperature reduction effect and the thermal diffusion from the heat source depending on the types of chambers with 3 kind of working fluids. As a result, it was confirmed that thermal conductivity 23% increased, GVC-R type than IVC-R type.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.1
• /
• pp.9-14
• /
• 2015

Due to the declining LED price and environment-friendly energy policies, CO2 emission reduction and energy-saving, the LED lighting industry is accelerating rapidly. In particular, the needs for LED lamp, replacing the existing fluorescent lamp without exchange luminaire or driver circuits, are also rapidly increasing. Therefore, replacement for T8 fluorescent lamp, LED T8 lamp was developed and standardized. However, except LED T8 lamps, other lamps' regulations or standards were not enacted. Also, the stability of fluorescent lamp substitutable LED lamp is low due to the difference in electrical characteristics and mismatch between the existing fluorescent lamp ballast and LED lamp. Therefore, many are struggling while developing fluorescent lamp substitutable LED lamp. In this paper describes the properties of existing fluorescent lamp ballasts and the considerations while developing fluorescent lamp substitutable LED lamp : demonstrating its validity by experiments the developed fluorescent lamp substitutable LED lamp prototype.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.15-18
• /
• 2009

Photopia, LightTools, and ASAP are typical software for optical design of a luminaire. Through using various lighting simulation software some different results can be found under the same conditions. Therefore, the purpose of this paper is to compare simulated photometric data and values illuminance of different types of LED prism luminaires under the same conditions. Then, LED prism luminaires were divided into the linear type and the planar type. Also three kinds of prism angles were divided into $30^{\circ}$, $45^{\circ}$, and $60^{\circ}$. In addition, the reasons for such differences were analyzed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.8
• /
• pp.7-17
• /
• 2015

Changes in melatonin concentration levels by differences in CCT of white LED light focused on Spectral Power Distribution (SPD) differences compared to the same CCT of conventional fluorescent light were analyzed. For this, melatonin concentration levels in saliva samples were taken over four different experiments at seven-day intervals. In 71.4% of participants, it was confirmed that melatonin concentration is suppressed by exposure to light, and a slight difference was observed by different CCTs. In addition, Experiment II with a high CCT was relatively high in terms of the melatonin suppression rate compared to Experiment III. A key finding was the possibility that different SPDs under a particular CCT of white LED light compared to the same CCT of conventional fluorescent light could have the same effect on the melatonin suppression.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.951_952
• /
• 2009

기존의 소듐이나 메탈할라이드 램프는 수명이 짧아 잦은 유지보수가 필요하다. 8~12m정도의 도로조명은 유지보수 중에 사고가 발생할거나 교통의 흐름에 불편을 가져와 이에 대한 대책이 필요하다. LED조명장치는 반도체 특유의 장수명으로 유지보수의 문제에 솔루션을 가지고 있다. 또한 기존의 조명시스템은 단색으로 색온도의 제어가 어려워 기능성조명장치의 구현이 거의 이루어지고 있지 않지만 반도체조명 장치인 LED조명은 다양한 LED칩을 적절히 배치하고 활용함으로서 색온도를 가변시켜 우천시나 안개시에 운전자의 주의를 환기시킬 수 있어 도로안전을 확보할 수 있다. 본 논문에서는 백색LED와 오렌지LED를 혼색하여 우천시나 안개시, 즉, 습도의 변동상황에서 색온도를 가변시켜 운전자나 보행자의 시인성을 확보하고 통행의 주의를 환기시켜 기능성조명으로서의 역할을 부여하는 LED가로등조명장치를 구현하여 이에 대한 성능을 실험하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.205-208
• /
• 2008

In this paper, we have measured and compared the optical and electrical characteristics of LED(light emitting diode) and CNT(carbon nano-tube) lightings. Especially, the IES format files are used for each of the luminaire LlD(luminous intensity distribution) analysis and light level simulation for analyze the maximum, minimum, and average light level. In the future, when CNT and the LED based lighting technology standards are writing, this data will be used in judging.