• 제목/요약/키워드: LED lamp

검색결과 424건 처리시간 0.027초

태양전지 이용을 위한 LED 조명 제어기 설계 (A Design of LED Lighting Controller for use of Solar Battery)

  • 김변곤;이옥재
    • 조명전기설비학회논문지
    • /
    • 제25권6호
    • /
    • pp.18-27
    • /
    • 2011
  • LED lighting because of high efficiency, long life, friendly environment, as a general lighting of the next generation, has been substituted for incandescent bulb and fluorescent lamp. The proposed system for use of solar battery is the intelligent controller for LED street lights which is improved the method of battery charging and charging efficiency in winter to extend battery life cycle, controlled lighting current according to SoC and in steps. Also, it is implemented emotional lighting which is controlled with the surrounding environment, by using colorful sub LED to take up 10[%] of a source of total light, white LED. As a lab results, the proposed system was implemented functions to adapt to the environmental changes, and improved the charging efficiency and battery life cycle.

형광등 안정기 호환형 등가 임피던스 가변방식 LED 구동회로 (Equivalent impedance variable LED driver compatible to florescent lamp ballast)

  • 최윤;장두희;강정일;오동성;한상규
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2013년도 전력전자학술대회 논문집
    • /
    • pp.352-353
    • /
    • 2013
  • 본 논문에서는 형광등 용 전자식 안정기 호환을 위한 LED 구동회로를 제안한다. 일반적인 전자식 안정기는 기본적으로 부하 전류제어를 하지 않으므로 형광등보다 소모전력이 낮은 LED 구동 시 과도한 전압상승이 발생된다. 따라서 기존의 전자식 안정기 호환용 LED 구동회로의 경우 소자내압을 낮추기 위해 과도한 Damping에 의존하므로 효율이 저조하고 안정기 호환성이 크게 떨어지는 문제점이 있다. 반면 제안된 회로는 별도의 Damping 회로없이 LED 구동회로의 등가 임피던스를 시비율에 따라 가변 함으로써 기존 문제점을 획기적으로 개선할 수 있다. 최종적으로 호환성 및 동작성능에 대한 타당성 검증을 위해 20W급 전자식 안정기에 적용하여 고찰된 실험결과를 제시한다.

  • PDF

LED 광원에 적합한 새로운 구조의 반사경의 설계 및 제작 (The Design and Fabrication of New Structure Reflector for LED Source)

  • 정학근;정봉만;한수빈;박석인;김규덕
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2006년도 춘계학술대회 논문집
    • /
    • pp.154-156
    • /
    • 2006
  • A few ten mW white LED can substitute for the indicator light source and it is required to study several watt multi-chip semiconductor light sources in order to replace the light sources for general illumination such as incandescent lights and fluorescent lanes. Since the optical technology used for several mW white LED light source uses only 30% to 52% of the light it is required to develop the design technology of optical system and lens to improve the efficiency more than 80% for insuring the high power of white LED. In this paper, we designed and fabricated new structure reflector to increase the efficiency and is easy to make high power multi-chip LED lamp.

  • PDF

유무선 원격제어장치를 이용한 LED 가로등 제어 시스템 구현 (Development of the LED Street Lamp by using Wired and Wireless Remote Control System)

  • 박성욱;엄우용
    • 전자공학회논문지
    • /
    • 제51권10호
    • /
    • pp.235-242
    • /
    • 2014
  • LED 조명 제어 기술은 LED 조명의 효율적인 관리를 위해 지속적으로 연구되는 분야 중의 하나이다. 본 논문에서는 LED 가로등을 원격으로 제어하기 위해 유무선 통신 기능을 가지는 LED 가로등 원격 제어 장치를 설계하고 구현한다. 구현된 원격 제어 장치는 조도 센서를 이용한 자동 디밍이 가능하고, RS-485/422나 Wi-Fi를 이용하여 LED 가로등을 개별(또는 통합) 제어가 가능하다. 실험을 통해 개발된 원격 제어 장치의 기능이 정상적으로 동작함을 확인하였다.

LCD 패널의 불량을 검출하는 검사용 LED BLU 개발 (Development of a LED BLU Tester Detecting the Errors of LCD Panels)

  • 고훈준;장경수;오주영
    • 한국콘텐츠학회논문지
    • /
    • 제10권5호
    • /
    • pp.62-69
    • /
    • 2010
  • LCD 패널은 자체적으로 발광할 수 없어 외부 광원인 BLU가 필요하다. BLU는 LCD 모듈에 포함되어 사용되고 LCD 패널의 불량을 검사하는 테스터에서도 사용된다. 최근에는 BLU가 CCFL에서 LED로 빠르게 변화되고 증가해왔다. CCFL은 초고압 전원이 필요하고, 열도 많이 발생하며, 일정한 휘도를 유지하기가 어렵다. LED는 전력소모량이 적고, 일정한 휘도를 유지한다. 그러나 현재 테스터에서 사용되는 BLU는 CCFL을 사용하고 있다. 본 연구에서는 LCD 패널의 불량을 검사할 수 있는 검사용 LED BLU를 개발한다. 또한 12~24인치의 LCD 패널을 모두 검사할 수 있도록 LED BLU를 24인치 크기로 제작하고 LCD패널의 크기에 따라 LED BLU가 동작하도록 개발한다.

LED 광원의 색온도와 조도 변화에 따른 심리반응 연구 (A Study on the Psychological Responses by the change of Illuminance and Color temperature in LED)

  • 이연수;하미경
    • 한국실내디자인학회논문집
    • /
    • 제21권6호
    • /
    • pp.129-136
    • /
    • 2012
  • As the importance of eco-friendly and energy saving issues are emphasized in lighting as consciousness about energy saving is elated worldwide, demand for natural resources such as gas increases, supply of LED lighting is spread. Owing to white LED's development and price fall. It is expected to LED High Luminance Emitting Diode. LED's brightness and long life-time that surpass fluorescent light in the latest as well as is used by back light source of thin film LCD, low electric power attrition rate by advantage do and widen the market at the world lighting lamp market that is potential market. Accordingly, study about suitability of LED lighting is activated but space that apply actual LED lighting fixtures yet is less and advanced researches about LED fixtures' applied apaces are slight compared to existing light source up to now because is not many on this. The result of the experiment shows similar tendency with the existing light sources'. Through a psychological reaction experiment in the LED lighting experiencing space that can control of color temperature and lighting level, this study is wished to use to the data for lighting design of space that LED lighting fixtures are applied hereafter.

  • PDF

저조도 환경에서의 염료감응형 태양전지를 활용한 발전소자에 관한 연구 (A study on a power plant using Dye-sensitized solar cells in low light environments)

  • 김순금;백성준
    • 전기전자학회논문지
    • /
    • 제25권2호
    • /
    • pp.267-272
    • /
    • 2021
  • 최근 화석에너지 고갈 및 환경 문제 해결을 위하여 신재생에너지와 탄소중립에 관한 관심이 집중되고 있다. 또한, 도시 건물의 고층화와 건물의 증가에 따른 건물에너지의 증가가 급속하게 되고 있다. 도시의 중심에 신재셍에너지원인 태양광 발전을 설치하는데 있어서 많은 제약사항이 있으며, 건물의 고층화가 됨에 따라 그늘이 형성되는 저조도 환경이 많이 발생하게 된다. 따라서 본 연구에서는 실외의 저조도 환경 및 실내의 조명 환경에서 전력발생이 가능한 발전소자를 개발하고자 한다. 저조도 환경에서의 발전소자는 태양전지의 종류중에 하나인 염료감응형 태양전지를 활용하고자 한다. 염료감응형 태양전지의 단위셀과 20cm×20cm 모듈을 제작하였고, LED, 할로겐램프, 3파장 램프의 광원을 활용하여 발전소자의 전기적 특성을 측정하였다. 단위셀의 광전변환효율은 LED, 할로겐 램프, 3파장 램프별로 17.2%, 1.28%, 19,2%로의 결과를 나타냈으며 20cm×20cm 모듈의 광전변환효율은 각각 10.9%, 8.7%, 11.8%의 결과를 나타내었다. 또한 모듈의 최대전력값은 광원별로 각각 13.1mW, 15.7 mW, 14.2 mW로서 저조도 환경에서 발전 가능성을 확인하였다.

자외선 여기용 청색 및 황색 형광체의 발광특성 (Luminescence Characteristics of Blue and Yellow Phosphor for Near-Ultraviolet)

  • 최경재;박정규;김경남;김창해;김호건
    • 한국세라믹학회지
    • /
    • 제43권5호
    • /
    • pp.304-308
    • /
    • 2006
  • We have synthesized a $Eu^{2+}-activated\;Sr_3MgSi_2O_8$ blue phosphor and $(Sr,Ba)_2SiO_4$ yellow phosphor and prepared white LEDs by combining these phosphors with a InGaN UV LED chip. Three distinct emission bands from the InGaN-based LED and the two phosphors are clearly observed at 405 nm, 460 nm and at around 560 nm, respectively. The 405 nm emission band is due to a radiative recombination from a InGaN active layer. This blue emission was used as an optical transition of the $Sr_3MgSi_2O_8:Eu$ blue phosphor and $(Sr,Ba)_2SiO_4:Eu$ yellow phosphor. The 460 nm and 560 nm emission band is ascribed to a radiative recombination of $Eu^{2+}$ impurity ions in the $Sr_3MgSi_2O_8:Eu$ and $(Sr,Ba)_2SiO_4$ host matrix. As a consequence of a preparation of UV White LED lamp using the $Sr_3MgSi_2O_8:Eu$ blue phosphor and $(Sr,Ba)_2SiO_4:Eu$ yellow phosphor, the highest luminescence efficiency was obtained at the ration of epoxy/two phosphor (1/0.2361). At this time, the CIE chromaticity was CIE x = 0.3140, CIE y = 0.3201 and CCT (6500 K).

비대칭 배광을 갖는 LED 가로등 2차렌즈 설계 (Secondary Optical Design of LED lens with Asymmetric Light Distribution for street)

  • 김성현;신익태;양종경;박대희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 하계학술대회 논문집
    • /
    • pp.162-162
    • /
    • 2010
  • In this study, optical analysis for 100W LED safety street lighting was conducted. Experimental research on such single LED was the first undertaken. simulation modeling based on optical properties of single LED has compared single LED product also designed 100W simulation modeling has compared average road illuminance with Korean Industrial Standards for LED safety street lighting(KS C7658:2009). 100W safety street lighting (model: CE180-ST-OS) designed by simulation has been also compared between product and 100W simulation modeling, and error rates have showed average 5.6[%]. Designed 100W LED safety street lighting base on simulation modeling was proven by comparison experiments. Through the simulations and the corresponding analysis, it was found that the tested 100W LED safety street lamp had reasonable performance. Design method for LED safety Street lamps have been summarized, based on the optical analysis.

  • PDF

가시광통신 시스템에서 2색 LED를 이용한 잡음광의 영향 감소 (Reducing the Effects of Noise Light in a Visible Light Communication System Using Two Color LEDs)

  • 이성호
    • 센서학회지
    • /
    • 제21권6호
    • /
    • pp.429-433
    • /
    • 2012
  • In this paper, we reduced the optical noise interference in a visible light communication system using two color LEDs. In the transmitter, the original and the inverted signals of the transmitted data modulated a red LED and a blue LED, respectively. In the receiver, a differential detector which is composed of two photodetectors and an optical red filter detected the mixed signal radiated from the two LEDs. In an environment that the optical noise from a fluorescent lamp exists, the signal-to-noise ratio in this system was improved by about 20dB compared to that in the conventional system which uses a single LED and a single photodetector.