• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.197-199
• /
• 2002

This paper describes the effects of chip arrangement configurations and the dimension of a reflecting cup upon the light output characteristics of a white lamp composed of RGB LED chips. As a result of simulation, the shorter distance between adjacent chips leads to a relative decrease in the light output efficiency due to inter-chip absorption of quanta, but rather uniform color mixing is expected. Among the factors of designing a reflecting cup it is the tilt angle of the cup wall that plays a determining role upon the variation of the light distribution. The light distribution shows a sudden change of pattern from Lambertian to Batwing at about $35^{\circ}{\sim}40^{\circ}$ of tilt angle in case of a silver-coated wall cup.

• 한국화재소방학회논문지
• /
• 제16권2호
• /
• pp.1-7
• /
• 2002

유도등은 일정한 조도를 가지고 상용전원에 의하여 항상 점등되어 있어야 함으로 전력소비 및 광원 교체등 경제적 손실과 관리상의 문제가 있게 된다. 본 논문은 이제까지 광원으로 사용하고 있던 형광등이나 백열전구 대신에 소비전력이 적은 고효율 발광다이오드를 사용하여 전력소비의 절감과, 점검시의 문제점을 개선하기 위해 원격제어가 가능한 새로운 유도등회로를 제안하고 실험한 것이다. 그 결과 원격제어 스위치에 의한 유도등 점검을 제어각의 범위에서 쉽게 제어할 수 있었으며 반응시간은 600〔$\mu$s〕로 매우 빠르게 동작하였다. 또한 출력 상승시간(Rise time)과 하강고시간(Fall time)은 최대 200〔ns〕로 예민하게 반응하였다. 광원으로 고효율 발광다이오드를 사용함으로 광원을 교체해야 하는등의 문제를 제거하였으며 전력소비를 감소시킬 수 있음을 확인하였다.

• 한국세라믹학회지
• /
• 제43권3호
• /
• pp.169-172
• /
• 2006

We have synthesized a $Eu^{2+}-activated\;{(Sr,Ba)}_2SiO_4$ yellow phosphor and investigated the development of blue LEDs by combining the phosphor with a InGaN blue LED chip (${\lambda}_{em}$=405 nm). The InGaN-based ${(Sr,Ba)}_2SiO_{4}:Eu$ LED lamp shows two bands at 405 nm and 550 nm. The 405 nm emission band is due to a radiative recombination from a InGaN active layer. This 405 nm emission was used as an optical transition of the ${(Sr,Ba)}_2SiO_{4}:Eu$ phosphor. The 550 nm emission band is ascribed to a radiative recombination of $Eu^{2+}$ impurity ions in the ${(Sr,Ba)}_2SiO_4$ host matrix. In the preparation of UV Yellow LED Lamp with ${(Sr,Ba)}_2SiO_{4}:Eu$ yellow phosphor, the highest luminescence efficiency was obtained at the epoxy-to-yellow phosphor ratio of 1:0.45. At this ratio, the CIE chromaticity was x=0.4097 and y=0.5488.

• 농업과학연구
• /
• 제44권2호
• /
• pp.261-271
• /
• 2017

The aim of this study was to investigate the amount of glucosinolates (GSLs) in kale sprouts (Brassica oleracea L. var. acephala) ('TBC') according to different concentrations of sulfur ions in sprout's nutrient solutions (0.0, 0.5, 1.0, and 2.0 mM) and to different light sources [Fluorescent lamp, Red, Blue, and Mix (R+B) LED]. Kale sprouts were cultivated in a growth chamber for 13 days in sulfur solutions. Kale sprouts were treated with fluorescent lamp and LED light sources for 5 days, from eight days after sowing to harvest. Amount of seven types of GSLs (progoitrin, sinigrin, 4-hydroxyglucobrassicin, glucobrassicin, 4-methoxyglucobrassicin, gluconasturtiin, and neoglucobrassicin) were measured in kale sprouts after harvest. The total GSL content was influenced by different sulfur solution concentration, and it was the highest at S 0.5 mM ($172.54{\mu}mol{\cdot}g^{-1}DW$) and the lowest at S 2.0 mM ($163.09{\mu}mol{\cdot}g^{-1}DW$). The GSL content was influenced by different light source, and it was the highest with Red LED ($159.23{\mu}mol{\cdot}g^{-1}DW$) and the lowest with Blue LED ($147.57{\mu}mol{\cdot}g^{-1}DW$). As the sulfur solution concentration increased under all light source, progoitrin and sinigrin contents tended to decrease while glucobrassicin content showed an upward tendency for all of the light sources. The content of glucobrassicin was higher than that of progitrin when treated with sulfur solutions for all LED light sources. Sinigrin, which has excellent anti-cancer effects, showed the highest rate (92.2%) among all the GSLs, under all of the light sources.

• IEIE Transactions on Smart Processing and Computing
• /
• 제6권4호
• /
• pp.269-275
• /
• 2017

Automatic vehicle detection is a very important function for autonomous vehicles. Conventional vehicle detection approaches are based on visible-light images obtained from cameras mounted on a vehicle in the daytime. However, unlike daytime, a visible-light image is generally dark at night, and the contrast is low, which makes it difficult to recognize a vehicle. As a feature point that can be used even in the low light conditions of nighttime, the rear lamp is virtually unique. However, conventional rear lamp-based detection methods seldom cope with atypical lamps, such as LED lamps, or flashing turn signals. In this paper, we detect atypical lamps by blurring the lamp area with a low pass filter (LPF) to make out the lamp shape. We also propose to detect flickering of the turn signal lamp in a manner such that the lamp area is vertically projected, and the maximum difference of two paired lamps is examined. Experimental results show that the proposed algorithm has a higher F-measure value of 0.24 than the conventional lamp pairing-based detection methods, on average. In addition, the proposed algorithm shows a fast processing time of 6.4 ms per frame, which verifies real-time performance of the proposed algorithm.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2020년도 추계국제학술대회
• /
• pp.61-61
• /
• 2020

This experiment was carried out using artificial bed soil and LED in the plastic film house(irradiation time: 07:00-17:00/day). Seedlings(n=63 per 3.3 m²) of ginseng was planted on May 17, 2018. LED was combined with red and blue light in a 3:1 ratio and irradiated with different light intensity(40-160 µmol/m²/s). Average air temperature from April to September according to the light intensity test was 20.4℃-20.9℃. Average artificial bed soil temperature was 20.1℃-21.7℃. The test area where fluorescent lamp was irradiated tended to be somewhat lower than the LED irradiation area. The chemical properties of the test soil was as follows. pH levels was 6.6-6.7, EC levels 0.9-1.3 dS/m and OM levels 30.6-32.0%. The available P₂O₅ contents was 73.3-302.3 mg/kg. Exchangeable cations K and Ca contents were higher than the allowable ranges and mg content was high in the fluorescent lamp treatment. The photometric characteristics of LED light intensity are as follows. The greater the light intensity, the higher the PPFD(Photosynthetic Photon Flux Density) value, illuminance and solar irradiation. Fluorescent lamp treatment had high illuminance value, but PPFD and solar irradiation were lower than LED intensity 40 µmol/m²/s treatment. The photosynthetic rate increased(2.0-3.8 µmolCO²/m²/s) as the amount of light intensity increased, peaking at 120 µmol/m²/s, and then decreasing. The SPAD (chlorophyll content) value decreased as the amount of light intensity increased, and was the highest at 36.1 in fluorescent lamp treatment. Ginseng germination started on April 5 and took 14-17 days to germinate. The overall germination rate was 68.8-73.6%. The growth of aerial parts(plant height etc.) were generally excellent in the treatment of light intensity of 120-160 µmol/m²/s. The plant height was 41.9 cm, stem length was 24.1 cm, leaf length was 9.8 cm and stem diameter was 5.6 mm. The growth of underground part (root length etc.) was the best in the treatment with 120 µmol/m²/s of light intensity. Due to the root length was long(24.8 cm) and diameter of taproot was thick(18.7 mm), the fresh root weight was the heaviest at 24.8 g. There were no disease incidence such as Alternaria blight, Gray mold and Anthracnose. Disease of Damping-off caused by Rhizoctonia solani occurred 0.6-1.5% and incidence ratio of rusty root ginseng was 30.8-62.3%. It is believed that the reason for the high incidence of rusty root ginseng is that the amount of field moisture capacity of artificial bed soil is larger than the soil. Leaf discoloration rate was 13.7-32.3%.

• 조명전기설비학회논문지
• /
• 제25권4호
• /
• pp.16-23
• /
• 2011

Since the first lighting light source was invented, lighting has turned into superior-quality lighting considering the amenity of occupants, and the characteristics of a light source has developed rapidly. So this research confirmed the lighting performance of a dimmer control system and an ON-OFF control system via the existing light source, and analyzed the basic lighting environment of Permanent Supplementary Artificial Lighting of Interiors(PSALI) through the physical comparison and evaluation of a LED lamp substituted for a fluorescent lamp used in a dimmer control system, showing that the lighting physical quantity characteristics of an ON-OFF control system and a dimmer control system are similar to each other and that they are effective in terms of energy saving. Besides, it was shown that introducing a LED light source to a dimmer control system improves lighting environments and largely reduces energy consumption.

• 원예과학기술지
• /
• 제35권2호
• /
• pp.178-187
• /
• 2017

인공 광원에 따른 rocketsalad(Eruca sativa L.) 내 GSL 함량을 조사하였다. 실험에 사용한 광원의 종류는 자연광(Control-1 또는 2), Red LED, Blue LED, Mix(R+B) LED(Red LED+Blue LED), White LED, Fluorescent Lamp(FL), Fluorescent Lamp+UV-C(FL+UV-C). 실험은 식물 생장기 대수 제한 때문에 [실험 I;Control-1, Red LED, Blue LED, Mix(R+B) LED]과 [실험 II;Control-2, White LED, FL, FL+UV-C]로 구분하여 수행하였다. 그 결과, Red LED와 FL에서 rocket salad의 잎의 길이의 증가율이 가장 높았다. 그러므로 Red LED와 FL이 rocketsalad의 성장과 관계가 있음을 확인했다. Rocketsalad로부터 총 7종류의 GSLs(glucoraphanin, diglucothiobeinin, glucoerucin, glucobrassicin, dimeric 4-mercaptobutyl GSL, 4-methoxy glucobrassicin, gluconasturtiin)를 분리 및 동정하였다. [실험 I]에서 총 GSL 함량은 Red LED(4.30)에서 가장 높고 Blue LED($0.17{\mu}mol{\cdot}g^{-1}\;DW$)에서 가장 낮았다. [실험 II]에서 총 GSL 함량은 FL(13.45)에서 가장 높고 FL+UV-C($0.39{\mu}mol{\cdot}g^{-1}\;DW$)에서 가장 낮았다. 특히 Rocket salad의 강한 향과 매운 맛을 돋아주는 dimeric 4-mercaptobutyl 함량은 [실험 II]에서 Control-2에 비해 FL과 White LED가 각각 14.9, 3.2배 증가했다. 따라서 Red LED, White LED, FL은 rocket salad의 GSL 축적에 영향을 주었다고 판단된다.

• 생물환경조절학회지
• /
• 제27권2호
• /
• pp.158-165
• /
• 2018

종류가 다른 보광등과 난방등으로 보광을 해 주었을 때, 절화 장미의 수확량, 절화수명, 엽색에 미치는 영향을 비교 분석하였다. 이를 위하여 보광등으로 LED등(Light emitting diode lamp, LED), 메탈할라이드등(Metal halide lamp, MH), 고압나트륨등 (High-pressure sodium lamp, HPS)과 난방등으로 나노탄소섬유 적외선등 (Nano-carbon fiber infrared lamp, NCFI)을 절화장미를 재배하고 있는 농가의 수경재배 베드 위에 설치하였다. 절화 장미 수확량과 판매 가능한 절화수는 HPS 처리에 의해 봄과 가을에 크게 증가하였다. 품질의 주요기준이 되는 절화장은 봄철에는 전등처리에 의해 대조구보다 길어졌으나, 겨울에는 오히려 감소하였다. 겨울에는 전등처리로 인해 개화가 촉진되어 영양생장기간이 상대적으로 짧아졌기 때문으로 생각된다. 절화수명은 전등 처리시간이 짧은 가을에는 처리간 차이가 보이지 않았으나, 겨울에는 HPS에서만 대조구에 비해 3일 정도 길어졌다. 엽색은 가을철 보다는 겨울철에 전등처리의 영향을 크게 받았으며, 모든 보광등(LED, MH, HPS)처리에서 엽색이 짙어진 반면, 난방등으로 이용되고 있는 NCFI에서는 대조구와 비슷한 밝기였다. 결론적으로, HPS는 절화장과 절화수명을 길게하며, 수확량도 증가시키므로 매우 좋은 보광등이라고 판단되었다. NCFI는 발열양이 많기 때문에 난방등으로의 기능은 충분할지라도 판매 가능한 절화수가 감소하고 품질지수가 저하되기 때문에 보광등으로서의 역할은 미약할 것으로 판단되었다.

• 한국버섯학회지
• /
• 제12권4호
• /
• pp.270-274
• /
• 2014

표고 톱밥배지 재배시 녹색LED 광량에 따른 생육특성분석 결과 $5umol{\cdot}m^{-2}{\cdot}s^{-1}$에서 3주기 기준 배지당 자실체의 수량은 239 g으로 형광등 202 g 대비 18% 증수효과가 있었으며, 자실체 폴리페놀 함량은 형광등 107 ppm에 대비 78.4 ppm으로 27% 정도 낮았지만 에르고스테롤 함량은 형광등 145 ppm 대비 307 ppm으로 2.1배 높은 함량을 보였다. 전력소모량은 형광등 대비 15.9%의 에너지 절감율을 보였으며, 전등의 에너지 효율이 77.5%로 가장 컸다.