• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.8
• /
• pp.775-779
• /
• 2006

In this study, sputtered $Al_2O_3$ thin films were evaluated as a passivation layer in the process of InGaN-based blue LEDs in order to improve the brightness of LED lamps. In terms of packaged LED lamps, lamps with $Al_2O_3$ passivation layer emanated higher brightness than those with $SiO_2$ passivation layer, and LED lamps with 90 nm $Al_2O_3$ passivation layer were the brightest among four kinds of lamps. Although lamps with $Al_2O_3$ passivation had a slight increase in operating voltage, their brightness was improved about 13.6 % compare to the lamps made of conventional LEDs without the changes of emitting wavelength.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.2
• /
• pp.123-129
• /
• 2009

In this study, SMPS to drive LED traffic signal light for the railroad and airport was designed and its electrical characteristics was measured. The output voltage, output current and its power efficiencies to the input voltage 8~12VAC and 8~16VDC were 6VDC, 1.85ADC and >70%, respectively. Also the power factors of the SMPS were above 0.75 in the AC input voltage range.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.261-263
• /
• 2004

This paper studies the lighting pattern control of a high-brightness LED warning light. The driving circuit for the warning light is composed of a full-wave rectified circuit and of a control circuit using a micro-controller (AT89c2051). The micro-controller is programmed in a suitable manner to accomodate a number of variable lighting patterns and to adjust the blinking speed. To reduce the total number of LEDs installed a special consideration is made to the bundled pattern in a lamp module which is lit simultaneously. The resultant LED warning light has merits not only over the conventional incandescent warning light on the energy saving aspect but also over some other LED-type ones in the market.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.237-238
• /
• 2015

본 논문은 스위치 동작 듀티에 따른 등가임피던스가 광범위하게 변화 하는 벅부스트 컨버터를 이용하여 전자식, 자기식 안정기 모두 호환 가능한 LED(Light Emitting Diode) 구동회로를 제안한다. 현재 사용되는 안정기는 상용 주파수를 출력으로 가지는 자기식 안정기와 LCC 인버터를 거쳐 수십kHz 주파수 출력을 가지는 전자식 안정기가 있다. 제안 회로는 안정기출력 주파수 특성 차이를 이용하여 High Pass Filter(HPF)를 통해 전자식 또는 자기식 안정기가 연결되었음을 감지하여 서로 다른 제어방식으로 동작시킴으로써 전자식 및 자기식 안정기 모두 호환이 가능하다. 본 논문에서 제안된 회로의 우수성을 검증하기 위하여 이론적 분석 및 16.8W급 LED 구동회로에 적용한 실험결과를 제시한다.

• Korean Journal of Optics and Photonics
• /
• v.25 no.6
• /
• pp.315-325
• /
• 2014

A combination of MHL and LED fish-luring light is used in this study. Its yield, characteristics, and irradiance distribution are evaluated and analyzed. To obtain an irradiance distribution similar to that of an MHL, we suggest the optimal arrangement of MHL and LED.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.4
• /
• pp.475-483
• /
• 2015

The marine microalgae Isochrysis galbana was cultured under various light-emitting diode (LED) light conditions with different wavelengths to examine changes in growth and in amino acid and fatty acid profiles. The culture conditions for the microalgae were Conway medium, salinity of 33 psu, temperature of $24^{\circ}C$, and a 16/8 h light/dark photoperiod. Six light sources, including 5 units of 180W LED lamps (peak wavelength: blue [LB] 470 nm; green [LG] 525 nm; yellow [LY] 595 nm; red [LR] 636 nm; white [LW] 442 nm) and 1 unit of a 175W metal halide (MH) lamp, were used for the experiment. The dry cell weights ($gL^{-1}$) of I. galbana under different light conditions were in the order of LW>LB${\geq}$MH>LR>LG>LY. Levels of essential amino acids were revealed to be significantly higher under LW, LG, and MH than under the other wavelengths (P<0.05). The fatty acid, unsaturated fatty acid, and DHA contents of I. galbana were higher under MH, LW, and LG. In addition, the carotenoid content was higher under MH, LW, and LG than under the other wavelengths (P<0.05). The fucoxanthin content was highest under MH (0.28%) and lowest under LY (0.2%), and it was 0.26% under LW and LG. The results indicate that the combined use of LW and LG is effective when using LED lamps for I. galbana cultivation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.296-305
• /
• 2012

In this paper, we develop about glare phenomenon at security light caused by light source's straight characteristic, maintaining uniformity ratio of illuminance as high, have long light distribution not by symmetry of rotation but a single axis. we develop second lens for security light that lack of light distribution phenomenon at each of security light can be solved. Our developed light system design satisfies lighting standard of security light's and shape of lens is single lens. so our lens optimizes designing or analysis by using lighting design and interpretation program. Making a Mock-up to do real measure, we have intensity of illumination and maintaining uniformity ratio of illuminance measurement data.

• 전자공학회논문지 IE
• /
• v.48 no.2
• /
• pp.12-18
• /
• 2011

In this paper, did numerical simulation to confirm LED module for lighting and protection against heat special quality of heat sink device. Analysis was gone dividing on case that emitting light side turns normalcy department considering that eat of device according to usage and case that turn down looking being street lamp of 200 W or security appointment lighting device analysis case, and also, volume of thermal element divides on big case and small case and analyzed. Confirmed that can do so that may discharge LED's thermal value to outside enough in analysis wave and current heat sink shape, and investigated that difference of protection against heat performance according to position of device and size of thermal element appears.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.1
• /
• pp.42-48
• /
• 2016

Light-emitting diode (LED) drivers are recently replacing fluorescent lamps; these drivers can operate adaptively with various ballasts without modifying and removing such ballasts. To satisfy these trends, a LED driver that is compatible with both electronic and magnetic ballasts is proposed in this study. Unlike conventional LED drivers, the proposed driver has a ballast recognition circuit and a mode selection circuit to operate ballasts at optimal conditions. Therefore, it features low voltage stress, high efficiency, and good compatibility with both electronic and magnetic ballasts. Moreover, it can be compatible with a wide selection of ballasts from various manufacturers. To confirm the validity of the proposed LED driver, results of the theoretical analysis and experimental verification performed on a 15 W-rated prototype are presented.

• Research in Plant Disease
• /
• v.22 no.2
• /
• pp.100-106
• /
• 2016

We have studied the mycelia growth of four soil-borne fungal pathogens under light qualities and two lighting types (continuous and intermittent) provided by light-emitting diodes (LEDs). As a result, each mycelia growth on Phytophthora cactorum KACC40166, Athelia rolfsii KACC40170, and Helicobasidium mompa KACC40836 strain showed the similar growth rates within 10% or less difference among treatments compared to dark control, regardless of lighting types. However, the mycelia growth on Rosellinia necatrix KACC40168 strain was significantly suppressed by blue, blue+green and blue+red LED as well as fluorescent lamp compared to a dark control, in common with lighting types. The melanin pigment on R. necatrix KACC40168 strain showed relatively to induce more strongly under green LED and fluorescent lamp, whereas no induction under red LED and a control, regardless of lighting types. Thus, the hypha width on R. necatrix KACC40168 was significantly thinned by blue and blue+green LED compared to a control, in common with lighting types.