• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.9
• /
• pp.750-754
• /
• 2012

An LED (light emitting diode) has the advantages of lower power consumption, energy saving, high efficiency, long lifetime, and environmental friendliness so that it has been getting the spotlight as a next-generation light source. Thus, the application range of an LED has been extended to various fields including indoor and outdoor lighting. Recently, the high efficient LED lighting has been developed, an LED has been extended its market rapidly every year and is expected to replace the general light source within near future. In this study were measured electrical and optical properties for 6 types of LED bulbs which are being developed to replace the general incandescent lamps, and were analysed under the standard of the omnidirectional lamp required by the Energy Star.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.1
• /
• pp.64-71
• /
• 2018

This study was conducted to investigate the effects of light intensity and wavelength on the growth of Tetraselmis suecica and Tetraselmis tetrathele. These species were exposed to a blue light-emitting diode (LED; max=450 nm), a yellow LED (max=590 nm), a red LED (max=630 nm) and a fluorescent lamp (three wavelengths). The maximum growth rates (${\mu}_{max}$) of T. suecica and T. tetrathele under a red LED were 1.12/day and 0.95/day, respectively. Under a yellow LED, growth rates were 70% of the values for red wavelength, with low half-saturation constants (Ks). The optimum light source to ensure economically effective and productive growth in a Tetraselmis culture system (Photo-Bioreactor) would thus appear to be a three-phase culture, wherein a yellow LED is used during the lag phase and initial exponential phase to increase growth rate, followed by a red LED during the middle exponential phase to maximize growth rate, and finally a yellow LED again during the late exponential phase and stationary phase to achieve increased yield of useful bioactive substances.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.1
• /
• pp.18-29
• /
• 2008

The purpose of this study was to compare the polymerization shrinkage of several filling methods using strain gauges. In this study, a light-emitting diode(LED) curing unit(Elipar Freeligh2, 3M EPSE, USA) and plasma arc lamp(PAL) curing unit(Flipo, LOKKI, France) were used for curing, Filtek $Z350^{TM}$(3M EPSE, USA) composite resin was used for the cavity filling. Sixty permanent bicuspid teeth, that were extracted for orthodontic treatment, were studied. The cavities were prepared on the occlusal surface and were filled using the following methods : 1) bulk filling, 2) parallel filling, 3) oblique filling The strain was recorded on the buccal, lingual, mesial and distal surfaces and the strain values were computed into stress values. The shear bond strength of each filling method was tested using a Micro Universal Testing machine. The results can be summarized as follows: 1. In the strain changes, all LED and PAL curing groups showed an increase on the buccal surface and a slow decrease as time elapsed. 2. In the strain changes of the mesial and distal surfaces, the decreases and increases were shown repeatedly and reduced as time elapsed. 3. There were no significant statistical strain changes among filling methods in the LED or PAL curing groups. 4. There were significant statistical strain changes between the LED and PAL curing groups on the buccal surface(p<0.05). 5. From the shear bond strength results, in the LED curing group, filling method 3 showed lower surface stress than filling method 1 and 2(p<0.05). In the PAL curing group, there were no significant statistical strain changes between each filling method. 6. The surface stress of each group was lower than the shear bond strength.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.255-258
• /
• 2001

This paper proposes a new structure of a fiber-optic illuminator using high Lux RGB LEDs. A simulation program, LightTools, is used for the verification of the model. An LED mounting holder containing 74 RGB LEDs is used as a basic part of its light collector. Since the light output level of current LED lamps is still far below that of conventional lamps, it is required to double the right output in order to replace a conventional illuminator with a halogen lamp. An additional cone-type reflector is installed hemispherically and the resulting structure comprises a basic collector unit. To further increase the output two collector units are connected together in series. As the result, the light output increases nearly 70% with compared to a collector with a basic structure. The system efficiency can be increased more than 8 times with compared to conventional one.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.2
• /
• pp.103-111
• /
• 2012

This paper introduces a novel concept of 'A Green LED Sensitivity Lighting System' which can automatically estimate QoS(quality of service) and emotional requirements of user using smart phone. And it can intelligently control ambient illumination lamp to conserve electric energy and to satisfy human sensitivity. The proposed system has 4 control modes; emotional lighting, smart lighting, green lighting and realistic lighting modes in order to comfort man's emotion, to maximize work efficiency, to save energy consumption and to make the entertainment more fun, respectively. When we choose green lighting mode for indoor office situations, an elaborate simulation shows that the proposed system with home network can reduce the energy by 50% compared to conventional light control system with a fixed time-based switching.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.63-64
• /
• 2011

조명용 전기 에너지의 효율적인 이용을 위해서는 사용 환경에 따라 조명 기구를 부분 조광(local dimming) 제어할 필요가 있다. 본 연구에서는 LED 면광원의 부분 디지털조광 시스템을 개발하고 부분 조광된 면광원의 발광영역 및 밝기와 조명 대상물의 조도 분포와의 관계를 측정하고 평가하였다. LED 면광원을 16개의 구역으로 나누고 FPGA와 FET 스위치를 이용하여 각 구역의 점등 및 광량을 디지털 제어하였다. 또한 실험용 암실을 만들어 암실 바닥면을 91등분하고 각 지점의 조도를 측정하여 부분 조광제어에 따른 조도 분포를 평가하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.11-14
• /
• 2009

색이란 빛의 스펙트럼 분포에 의하여 눈이 느끼는 지각이고, 삼자극치에 의하여 수치화된 색자극의 표시이다. 이때 삼자극치란 사람의 눈의 중심와 부분에 분포하는 3가지 추상체에 의하여 뇌로 전달되는 색의 정보를 수치화한 것이다. 삼자극치를 이용하면 색을 수치로 나타낼 수 있고, 색을 객관적으로 측정할 수 있다. 본 논문에서는 LED의 광량 제어에 디지털 방식을 이용한 full color LED 램프의 이론적인 색채연구를 위하여 분광분포를 이용한 삼자극치를 구하는 과정에 대하여 논하였다. 또한 구해진 삼자극치로부터 색도좌표를 구하는 과정을 모델링하였고, 실제로 측정된 색도좌표와의 오차를 계산하였다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2121_2122
• /
• 2009

In this paper, we analyzed carbonization pattern of Ligth Emitting Diode(LED) lamp that become burnout by outside flame. Surface side can know that void is formed greatly than central part in section analysis of electric wire that is carbonized by outside flame. Chared globe displayed special quality that lump of abnormal carbonization falls was formed, and becomes melting among carbonization process. The LED resistance of forward direction is about 1.74 [$M{\Omega}$], and backward resistance is about 140 [$M{\Omega}$]. We can know progress direction of flame through measurement of the LED resistance.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.11
• /
• pp.7-13
• /
• 2013

There has been a need for the systematic evaluation of the economic efficiency between conventional fluorescent lamp lighting systems that have been used in tunnels and LED lighting systems. This study has evaluated basic tunnel lighting between the conventional fluorescent lighting systems and the LED lighting system using the evaluation tool of tunnel lighting by Life Cycle Cost (LCC) and using the economic efficiency evaluation method. In addition, the unit discount rate of the LED lighting system and the estimated increase in the price of electricity have made the estimated cost of LCC the same if two luminaires were used in the basic part of the tunnel.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.985-987
• /
• 2010

신성장 동력 산업으로 분류된 LED 조명제품은 긴 수명과 고효율 에너지 제품으로 인해 많은 주목을 받고 있지만, LED 조명제품이 고출력화 될수록 정션온도가 증가하면서 수명 단축 및 출력 저하의 문제가 발생한다. 따라서, 본 연구에서는 조명등 정션온도의 최소화를 위한 방안을 도출하고 수치해석을 통해 방열 성능을 예측하였다. 또한, 10W 이상의 고출력인 경우 방열면적의 증가로 인한 조명등의 중량 증대가 문제시 되므로 경량화를 위한 방열해석도 수행하였다.