• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.2
• /
• pp.72-75
• /
• 2011

In this paper, the voltage across the LED system supplied by positive voltage of power supply system the power consumption of the LED itself, and uses a lot of transformers and analog devices, such as converter startup problems and constant temperature even when the voltage driving abnormally LED current in the destruction caused by the flow of a lot of problems can occur. In this paper, we obtain the technology of consistent current using PWM(pulse width modulation) mode in order to minimize analog devices and eventually discuss the technology to develop consistent output converter using power drive IC.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.906-909
• /
• 2004

Status of high intensity LED, one of the recent issue in industry is reviewed. In a system view, various power supply methods for multiple array construction are introduced rather than one for single LED. Custom IC for driving LED and different circuit for applications are also considered.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.147-149
• /
• 2014

본 논문에서는 LED드라이버의 지속적인 과제인 고역률, 효율개선 및 장수명화를 위한 연구를 진행하였다. 전체적인 토폴로지는 역률개선 및 출력전류제어의 성능을 자세히 관찰하기 위하여 투 스테이지 토폴로지를 선정하였으며, 1차측은 고 효율을 위하여 Bridgeless타입의 Totem-Pole bridgeless rectifier를 선정하였으며, 2차측은 LED드라이버의 수명을 좌우하는 DC 커패시턴스를 줄이기 위한 전류제어를 하기 위하여 Flyback DC-DC컨버터 토폴로지를 적용하였다. 일반적인 투 스테이지 토폴로지와 본 논문에서 제안한 토폴로지의 시뮬레이션 및 실험을 통하여 성능적인 분석을 통하여 LED드라이버의 효율증대 및 수명증가에 대한 내용을 다루었다.

• Proceedings of the Optical Society of Korea Conference
• /
• 1989.02a
• /
• pp.172-175
• /
• 1989

1.3${\mu}{\textrm}{m}$ surface-emitting GaInAsP/InP LED was fabricated by two-phase supercooling LPE technique. The lattice mismatch of the grown DH wafer was typically 0.03%. The processes involve SiO2 CVD, lithography, Zn diffusion, lift-off, lapping, annealing, and wire bonding. The fabricated LED shows the optical power of 600㎼ at 70mA driving current, differential resistance of 4$\Omega$, the f3dB of 35MHz, and the FWHM of 1040{{{{ ANGSTROM }}. The peak wavelength of the fabricated LED was at 1.29${\mu}{\textrm}{m}$(100mA).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4489-4493
• /
• 2014

LED light driving device has problems in efficiency and heating at higher than 150W. In addition, there is inconvenience in replacing the lighting device to another when W is not the same as the previous one. In this paper, a multi-channel LED light driver, driver embedded driver circuit in a multi-channel structure with a power system in the driver-interlocking structure was designed. With the auto control converter structure with a power efficiency above 93% and power factor above 0.98, the weight of the high efficiency LED lighting-actuating device in driver-interlocking structure, a driver in self-calibrating self-optimization structure. In this paper, at below 10% THD, the existing converter contrast weight was reduced by 40% or more.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.2
• /
• pp.122-129
• /
• 2015

In this study, we propose a low voltage stress and cost-effective light emitting diode (LED) driver capable of multi-channel current balancing. Conventional LED drivers require as many boost converters as the number of LED channels, whereas the proposed LED driver requires only one buck converter and several balancing capacitors instead of several expensive boost converters. Additionally, while the components of the boost converter have high voltage stress and depend on the LED driving voltage, components of the proposed driver have about one-half of the voltage stress across all components. The proposed driver exhibits high reliability and cost effectiveness because it only uses few DC blocking capacitors with no additional active devices to balance the current of multi-channel LEDs. The proposed driver exhibits high reliability and cost effectiveness. The validity of the proposed driver is confirmed through a theoretical analysis. An explanation of the design considerations and experimental results were obtained using a prototype applicable to a 46" LED-TV.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.7
• /
• pp.1-7
• /
• 2013

LED lamps are appropriate to the light source for use in broadcasting lighting. When the lighting frequency of LED lamp is different from the shutter frequency of camera, however, the flicker appears on the moving image which is taken by the camera under the dimmed light of LED lamp with conventional dimming methods. In this study, a new dimming method for the LED lamps used as the broadcasting lighting is proposed to minimize the flicker. A lighting period in the proposed dimming method is divided into the several sub-periods which have weight of the bits. Also, the proposed dimming method has characteristics that are optimizing the turn-on timings of two LED lamps to reduce the turn-off periods of the lamps and not to overlap the turn-on periods of the lamps. In the experiments, the incidence of the flicker is taken by the camera under several lighting conditions of the conventional dimming methods and the proposed dimming method. In addition, the brightness values of the frames are obtained in the moving image, and incidence of the flicker is evaluated and compared with conventional methods. From the results, the incidence of the flicker in the proposed method is more improved than the conventional methods.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.81-83
• /
• 2005

반도체 기술의 발전으로 기존에 전자회로 부품으로 사용되던 LED(Light Emitting Diode)는 차세대 조명용 광원으로 대두되고 있다. LED는 소비전력이 작아 에너지를 절약할 수 있을 뿐만 아니라 수명이 길어 유지보수 비용이 획기적으로 줄어든다. 현재 신호등과 같은 지시용 조명기기를 대체할 광원으로 다양한 시도가 이루어지고 있다. LED는 자체적인 발열은 적지만 주변온도에 민감하게 광도가 변화한다는 단점을 가지고 있다. 높은 온도는 LED의 수명에도 영향을 미쳐 열화를 빨리 가져오게 된다. 따라서 정전류제어를 통해 LED의 전류를 일정하게 하고 온도변화에 영향을 받지 않고 광도를 일정하게 유지하여야 한다. 본 논문에서는 정전류 구동회로에 열화로 인한 LED의 수명의 연장하기 위해 온도변화에 따라 LED의 구동전류와 일정한 광출력을 유지하기 위한 제어회로를 제안하였다. 제안한 제어회로는 시뮬레이션을 통해 타당성을 검증하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.5
• /
• pp.643-648
• /
• 2011

In this study, SMPS driven LED traffic signal light for Large-scale traffic such as railroad and airport was designed and its electrical and EMI characteristics were measured. The output current of the LED module driven by SMPS was 1.67A for AC and DC input voltage over 10V. The conducted emission measured over 0.15~30MHz frequency range was lower than the allowed quasi-peak and average level, and the radiated noise measured over 30~1000MHz frequency range showed $23.96dB{\mu}V/m$ at 59.96MHz.

• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.335-340
• /
• 2014

Recently, LED (Light Emitting Diode) becomes to be useful to apply for the lightening sources in electric systems and the lightening equipment since the power is less consumed with high efficiency, and the size and the weight of LED are small and light, respectively. The LED is controlled with constant current and SMPS (Switching Mode Power Supply). It is necessary for the LED manufacturer to secure the fundamental technology of designing LED chip, and to study the methodology to improve the power factor (PF) and to design the operational circuit for the development of LED to reduce the power loss in the application of LED lightening. The direct AC (Alternating Current) LED driving circuit, HV9910, is widely used in the industry field. In this paper, it is to evaluate the improved methodology for the power factor and efficiency through simulations when PFC (Power Factor Correction) and Noise Filter are added to HV9910.