• Journal of Power Electronics
• /
• v.12 no.6
• /
• pp.869-877
• /
• 2012

This paper presents a current-balancing circuit for security lights that uses parallel-connected LEDs. The parallel connection of LEDs causes current differences between the LED strings because of characteristic deviations. These differences can reduce the lifespan of a particular point of LEDs by thermal spotting. They can also cause non-uniform luminance of the lighting device. Among the different methods for solving these problems, the method using current-balancing transformers makes it easy to compensate for current differences and it has a simple circuitry. However, while the balancing transformer has been applied to AC light sources, LEDs operate on a DC source, so the driving circuitry and the design method have to be changed and their performances must be verified. Thus in this paper, a design method of the balancing transformer network and the driving circuitry for LEDs is proposed. The proposed design method could have a smaller size than the conventional design method. The proposed circuitry is applied to three types of 100-watt LED security lights, which use different LEDs. Experimental results are presented to verify the performance of the designed driving circuits.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.79-80
• /
• 2016

A discrete time domain analysis for the duty-cycle-controlled buck LED driver is performed in this paper. Based on the analysis, the design guidelines are derived. Experimental results are presented to confirm the design.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.321-322
• /
• 2017

A discrete time domain analysis for the slope-compensated buck LED driver is performed in this paper. Based on the analysis, the design guidelines are derived. Experimental results are presented to confirm the design.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.855-856
• /
• 2011

• Proceedings of the KAIS Fall Conference
• /
• 2008.05a
• /
• pp.170-172
• /
• 2008

본 논문은 LED조명기구의 상용화에 문제가 되고 있는 방열설계에 관한 논문으로서, CF-design을 이용한 방열해석을 통하여 문제해결의 방법을 제시한다. 해석 결과 시뮬레이션 값과 시작품 제작 후 측정 온도와의 차이가 6[$^{\circ}C$]이하로 도출되었으며 주어진 제 요소들을 잘 활용하면 실제작품의 목표치에 근접하는 결과를 얻을 수 있다.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.1
• /
• pp.103-113
• /
• 2019

The purpose of this study was to develop an e-textile using LEDs that can enhance visual and functional effects, and to identify their applicability to sportswear. By applying the design elements of fashion design concretely with LEDs, an e-textile design module is developed and that module is applied to the product, so LED application design can be proposed for use in a practical product. E-textiles have been divided into five categories, and their usefulness were verified by applying e-textiles to men's and women's sportswear. The product beign considered has a built-in tilt sensor, which illuminates the LEDs according to the user's movements, and allows the LEDs to be turned on or off in accordance to the user's preference. E-tatoo is a type of LED application that enhances the appearance by placing LEDs on a small area, emphasizing origin points, just like an actual tattoo. Designed with LEDs arranged in a straight line and various curved forms, e-strips can provide a function that matches the characteristics of each section of clothing or fashion item. E-wappen uses about 7-10 LEDs to give motifs a strong sense of visibility, thus adding to their vibrancy. E-panels and e-clothes were able to produce creative and high-value textures. It is also expected to be used for special purposes or bags as it is possible to produce high value-added textures that are creative and aesthetically beautiful. For instance, a progressive LED string on the straight line of female leggings can further emphasize rhythmic movements during exercise, and e-wappen also serves the purpose of nighttime protection. It is also believed that the application of dance or dance-related sportswear will make the movement of the performance more intense and lively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.558-566
• /
• 2015

LED, the next-generation light source, rapidly develops and has advantages of low power, high efficiency, and long life. Accordingly, an interest in lightings by using LED rises. If emotional lighting is implemented by using LED, all colors can be represented by using 3 primary colors of light, differently from the conventional single-color lighting. LED emotional lightings which can control human emotions continue to be developed thanks to these advantages. This study was conducted to design an algorithm for expressing LED emotional lighting in line with the situation and temperature by extracting colors for concentration and resting situations in indoor environment and mixing them with colors of the temperature felt by user. The LED emotional lighting designed with a neuro-fuzzy system was found to have effects on user's emotions during concentration and resting.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.220-221
• /
• 2017

The initial light emitting diode (LED) has been used as a display device for various mechanical devices due to its low power. The development of LED technology has made it possible to express color with high power and high brightness. Therefore, it is used as a display such as a traffic signal, a large electric signboard, and an automobile display, and is also adapted as an indoor or outdoor light source such as an incandescent or a fluorescent lamp which requires the high luminance. The bulb of marine lantern, which is used for the aids to navigation, was replaced to LED. The first marine LED lantern was manufactured using multiple LEDs. However, if the optical design is renewed by the development of LED or even if a few LEDs are used, it is possible to satisfy the brightness and the light distribution required by the marine LED lantern.

• Journal of the Korea Furniture Society
• /
• v.24 no.2
• /
• pp.113-120
• /
• 2013

The purpose of this research is to provide new direction on the field of the furniture design and to establish the identity of Korean furniture design as the flow of craft's juxtapose mixture era where it mix and match Korean traditional craft style materials with the modern furniture design. In other words, it is intended to create new furniture design and propose beautiful Korean luxury furniture design based on the precious unique culture with the traditional craft style, juxtaposition of modern furniture, and reinterpretation. It should grant artistic values that can satisfy consumers having various tastes and scarcity values, plus it should put out aesthetic and creative expressions in furniture design putting into the beautiful traditional craft form values. Furthermore, it is required to create new design through values and spirit, materials, techniques, forms, pattern, and usages by interacting, coordinating, and combining tradition and modern East and West, plus craft and design.

• Journal of Fashion Business
• /
• v.25 no.1
• /
• pp.51-64
• /
• 2021

The purpose of this study was to develop smart bags that combining fashion-specific trends and smart information technologies such as light-emitting diodes(LED) and optic fibers by grafting marquage techniques that have recently become popular as part of eco-fashion. We applied e-textiles by designing leather tote bags that could show off LED luminescence. A total of two tote bags, a white-colored peacock design and a black-colored paisley design, divided the LED's light-emitting method into two types, incremental lighting and random light-emission to suit each design, and the locations of the optical fibers were also reversed depending upon the design. The production of circuits for the LEDs and optical fibers was based on the design, and a flexible conductive fabric was laser-cut instead of wire line and attached to the circuit-line location. A separate connector was underwent three-dimensional(3D)-modeling and was connected to high-luminosity LEDs and optic fiber bundles. The optical fiber logo part expressed a subtle image using a white-colored LED, which did not offset the LED's sharp luminous effects, suggesting that using LEDs with fiber optics allowed for the expression of each in harmony without being heterogeneous. Overall, the LEDs and fiber optic fabric were well-harmonized in the fashion bag using marquage techniques, and there was no sense of it being a mechanical device. Also, the circuit part was made of conductive fabric, which is an e-textile product that feels the same as a thin, flexible fabric. The study confirmed that the bag was developed as a smart wearable product that could be used in everyday life.