• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.5
• /
• pp.373-377
• /
• 2005

In this paper the gas leakage controller in processing chamber for semiconductor manufacturing is proposed. A pressure sensor is connected between the final valve and the numeric valve. A pressure sensor signal and a numeric valve signal are controlled by a proposed digital circuit module. Gas leakage condition, producing by 2nd plasticity in semiconductor process, display at LED. The proposed controller module is useful for monitoring the gas flow for preventing the critical process gas leakage.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.6
• /
• pp.706-713
• /
• 2020

To control the LED lighting for broadcasting, LED current control using tri-stimulus values is used for RGB LEDs. For the convenience of control, this control is approximated as a linear function or used as an appropriate value through trial and error. Also, it is not suitable for broadcast lighting because it does not use a diffuser plate applied for mixing sufficient light and color required for actual it. In this study, a neural network with excellent nonlinear function approximation is used as a control method for LED panels for broadcast lighting. We intend to implement an LED panels controller suitable for the desired chromaticity coordinates and dimming values of intensity. As a result of the performance evaluation, the errors of the xy chromaticity coordinates are mostly ±0.02 and the acceptable range of ANSI C78.377A was satisfied. The average errors of the xy chromaticity coordinate are xerror=0.0044 and yerror=0.0030, respectively, and we confirmed the superiority and stable performance of the proposed algorithm.

• Journal of Power Electronics
• /
• v.14 no.2
• /
• pp.226-236
• /
• 2014

A new active LED driver with high power factor (PF) and low total harmonic distortion (THD) compatible with a rapid-start ballast is proposed. An LC input filter is attached to the ballast to increase PF and reduce THD. A boost converter is then installed to regulate the LED current, where an unstable operating region has been newly identified. The unstable region is successfully stabilized by feedback control with two zeroes. The extremely high overall system of the 10th order is completely analyzed by the newly introduced phasor transformed circuits in static and dynamic analyses. Although a small DC capacitor is utilized, the flicker percentage of the LED is drastically mitigated to 1% by the fast controller. The proposed LED driver that employs a simple controller with a start-up circuit is verified by extensive experiments whose results are in good agreement with the design.

• Journal of Satellite, Information and Communications
• /
• v.7 no.2
• /
• pp.25-29
• /
• 2012

In this paper, we implemented LED beam forming communication system controlled by stepping motor. ATMega1284 was used as a MCU of main control board which has two main external IO, one is RS232 for connection with PC, the other is PORT for connection with motor driving board. Stepping motor rotated 360 degree when provided 160 clock and its rotation radius was increased by Archimedian Spiral. So LED can provide its light anywhere in the space and its beam forming was controlled by PC connected with RS232 of main control board. The action of beam forming was verified via actual HW/SW implementation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3446-3450
• /
• 2010

This study aims to make class lighting that gives classroom to stability and activity. For the purpose, we develop a emotional lighting LED using LED source which is a environment-friendly and the lighting fo the next generation. We composed emotional lighting LED as controller for color conversion, power supply for supplying LED lamp a stable power, PCB board for LED lamp and lamp and case. We developed designed emotional lighting LED and proved that the system works and one can get intended color.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.440-443
• /
• 2011

This paper aims to compose a new LED lighting control board in the LED lighting environment This LED lighting control board is designed to adjust the brightness of LED lighting depending on the change of surrounding brightness, and it is also designed to control the brightness by using ATmega128, which is an 8bit micro-controller, The PWM wave form likely to output into the LED driver is determined by the ADC value input through ADC.

• Journal of Satellite, Information and Communications
• /
• v.8 no.2
• /
• pp.12-16
• /
• 2013

In this paper, we proceeded a study about the mobile software applications using smartphone technology. Firstly, we proposed a communication which a position data transmission technique using LED flashlight with built-in smartphone and we develop the application to perform a remote controller for beam-forming communication based on visible light associated with the position of Smartphone user. OOK modulation was applied for transmitting location data via LED backlight flash of smartphone and PD is used for detecting receiving light. In case of remote controller application which was controlled by WiFi IP-networking and it controls LED direction for beam-forming communication. These suggestion can be a good example for ubiquitous position recognition system using smart phone and software.

• Journal of information and communication convergence engineering
• /
• v.19 no.4
• /
• pp.214-220
• /
• 2021

In this study, we constructed several scenarios that are required for LED lighting, and we designed and implemented an LED lighting control system to operate these scenarios to confirm their behavior. An LED lighting control system is a hybrid control board that is designed by combining LED controllers and SMPS, consisting of an AC/DC power supply part that converts AC 220 V into DC 12 V, and a drive and control part that controls the scenario and color of the LED module. Conventional LED light controllers have an input power of DC 12 V, so when using the input AC 220 V, the SMPS must be connected to the LED light controller. To eliminate this inconvenience, a hybrid LED lighting control system was configured to combine LED lighting controllers and SMPS into one control system. Furthermore, we designed a control system to represent the most appropriate color according to the input of the distance and illumination using a fuzzy control system to conduct computer simulations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.462-468
• /
• 2010

In this paper, the new efficient drive control technology based on the conventional full-color electric display board image processing method is proposed. This technology can be applied to high-fidelity large size panel TV and LCD Display, and makes high-fidelity-display-drive control possible in those. The proposed drive control technology can strengthen the image processing function of the conventional technology. Also, the automatic or manual adjustment of contrast, bright, tint, color, gamma revision, etc. can help to achieve high-fidelity vision. This technology can be adopted with lower price.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.142-145
• /
• 2019

In recent years, the global GEF(Green Energy Family) activities to preserve the global environment due to energy consumption have been implemented under the Kyoto Protocol for the Prohibition of Carbon Dioxide Emissions, RoHS (Restriction of Hazardous Substances directive), and WEEE(Waste Electrical and Electronice Equipment) are required to collect waste for the purpose of minimizing waste by integrating lighting and communication. In this paper, we constructed a controller that can control the illumination of RGB LED module by using fuzzy inference system and checking environmental factors(Illumination, distance to the subject, etc.) using microprocessor in real time.