• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.01a
• /
• pp.299-300
• /
• 2011

태양에너지를 에너지 공급원으로 하고 LED 램프를 조명용 광원으로 사용하여 적은 전력 소모와 연장된 램프의 수명으로 에너지 소모를 크게 줄이고, 유지 보수 관리 비용을 획기적으로 줄일 수 있는 LED 조명제어시스템을 개발하였다. 점등 회로, 구동회로 등의 최적화된 설계와 구성으로 광 변환 효율을 높여 소형화, 경량화 되도록 하고, 환경 친화적인 조명 광원으로서 효율적인 성능을 얻을 수 있도록 한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.9
• /
• pp.1-7
• /
• 2012

In this paper, we present a new lighting control method considering ambient light in addition to the required lighting illumination for efficient energy saving of a LED stand. We estimate accurate environmental illuminance using a cheap illuminance sensor by modeling measured- and actual-illuminance using quadratic polynomial approximation. The relation between PWM(Pulse Width Modulation) duty ratio and illuminance intensity is modeled by a linear model. Illumination of the LED stand is controlled by estimating the difference of required illumination and the estimated ambient illumination. The developed LED stand has reduced electric energy consumption compared with a conventional manually controlled LED stand with the same lighting source. In addition, human subject evaluation shows that the LED stand, which is applied the proposed method, is more satisfactory than conventional ones since the proposed automatic controlled illumination produce more accurately required lighting and it is convenient.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.3
• /
• pp.191-196
• /
• 2016

In order to establish the basic data for the growth of fish in the aquaculture industry, the behavior analysis of rockfish (Sebastes inermis) depending on the temperature and LED lights was conducted. In this study, water temperatures were set from $3^{\circ}C$ to $30^{\circ}C$ were used. One red light (wave length: 622 nm; light power: 811 mW) and one green lights (wave length: 518 nm; light power: 648 mW) were used. Behavior of the rockfish was expressed as average moving distance (AMD) for 1 minutes and a rate of movement. The mean AMD depending on the temperature was 1.0 m and the mean rates of movement was 50%. The mean AMD were 1.5 m, 1.9 m and 0.7 m in the red LED light, green LED light and control condition respectively. The mean rates of movement were 54%, 65% and 45% in the red LED light, green LED light and control condition respectively.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.2
• /
• pp.1-6
• /
• 2005

This paper studies the OF-LED(Optical Fiber-LED) illuminated display board system for energy saving. The OF-LED illuminated display board system has PV module, batteries, charge 8t discharge system and dynamic full color display controller. Both maximum power point tracker (MPPT) and constant current & constant voltage controls (CCVC) are used to govern the charging system. This system. improves the charging efficiency of battery. The system is compact and operates only by PV except the rainy days when the sun is unfavorable. in the system display control and charging-discharging control by on-chip microprocessor are simultaneously carried out. To verify the unposed system, me simulation and experiment results show the operating characteristics with a laboratory prototype.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.2
• /
• pp.113-119
• /
• 2011

LED lighting has received much attention in recent years due to its high energy efficiency and environmental friendliness. As the color of light can be obtained by adjusting the light intensity of LEDs, the quality of visual environment can be improved. The aims of this study are to develop a wavelength adjustable LED lighting system and to examine its lighting performances. The LED lighting system and experimental cell for assessment of the lighting performance were constructed. This LED lighting system is able to materialize the various spectral power distribution and color temperature of light through the control of the four dimmers. Up to $432^4$ kinds of light combinations are possible. The range of illuminance on workplane were measured as 7~1,831 ㏓. Improvement of psychological and physical functions for occupants can be expected according to control of lighting performances.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.14-19
• /
• 2019

In this study, the Relux illumination program was used to simulate the optimal lighting design for a glass greenhouse with Si and DSSC solar-cells and LEDs. The results of the daylight simulation show that the optimum conditions were a structure angle of 90o and higher transmittance. The results of the illumination simulation produced a power consumption effect of 5.6 kwh in the summer (42[%] energy savings compared to full LED control) and 7.8 kwh in the winter (58[%] energy savings compared to full LED control). The results suggest that ginseng should be grown in an energy-saving glass greenhouse.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.4
• /
• pp.849-853
• /
• 2012

Generally, it is not easy to learn guitar fingering for beginner. In this paper, therefore, we attach LED to flat board of guitar to more easily teach the beginner and also implement LED control system that can connect ATmega 128 in order to drive LED attached to guitar. The guitar's flat board is connected with ATmega 128 as communication method of Zigbee. We also develop UI that easily can be learned code and playing for guitar, programmed by guitar fingering and perform the research for guitar fingering using LED.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.307-308
• /
• 2013

기존 LED(Light Emitting Diode) 백라이트 LCD(Liquid Crystal Display) TV 용 전원 장치는 다중출력 플라이백 컨버터를 사용하여 로직 보드, 영상 보드, LED 백라이트 등의 구동에 필요한 다양한 전원들을 생성, 공급한다. 특히, 기존에는 LED 백라이트의 구동을 위한 출력단에는 부스트 컨버터를 추가하여 LED 전류를 제어하였다. 따라서, 부스트 컨버터에 의한 부피 및 원가가 증가하는 단점이 있었다. 본 논문에서는 부스트 컨버터 없이 보조 스위치 하나만을 사용한 LED 구동회로를 이용하여 LED의 정전류 제어가 가능한 저 가격형 LED 구동회로의 비동기식 제어방법을 제안한다. 최종적으로 제안 회로를 32인치 LCD TV 용 LED 백라이트에 적용하여 그 실험 결과를 바탕으로 제안 회로의 타당성을 검증하였다.

• Journal of Industrial Technology
• /
• v.31 no.A
• /
• pp.95-101
• /
• 2011

According to recent technological developments in high-power LEDs, the stage lighting is one of most important areas to apply power LED system. Moving light for color rendering of stage uses the RGBW(red, green, blue, white) color mixing method. LED moving light system needs to have a wide range of dimming control as enough to operate at very low power. Also LED dimming system should not be induced color-shift and flicker in camera. This paper is experimentally verified the LED Moving Light driving circuit of 200Watt level designed to satisfy the above characteristics which applied the DC current-controlled and PWM mixed dimming method.

• Journal of Advanced Navigation Technology
• /
• v.21 no.3
• /
• pp.220-229
• /
• 2017

In this paper, To take advantage a variety of DC power as the boost DC-DC converter design specifications through the inductor L and capacitor C through PSPICE to calculate the best estimate of the value. Boost DC-DC converter with a switch device using IRF840 and reverse recovery time Schottky diodes with excellent with constant current controller using D10SC6M and resistance can be configured to considering the Power LED Module was driven by the production. Converter's switching frequency is 50 kHz, the first Duty Rate was made to increase gradually depending on the value of the detection were, 10 % in the output voltage. As a result, the simulated Boost Power LED driver characteristics is in comparison with the design specifications, 5% or less as the error was approximated. Finally, when input 15 V were offered, a stable output 24 V were obtained. and Dimming Control through the adjustment of brightness and current consumption were possible.