• Title/Summary/Keyword: LCD glass

Search Result 294, Processing Time 0.029 seconds

Recovery of Tin from Tin Oxide Resulted from Glass Manufacturing Process by Pyrometallurgy (유리생산공정 폐주석산화물에서 건식제련에 의한 주석회수기술)

  • Lee, Sang-Ro;Kim, Sang-Yeol;Lee, Man-Seung;Park, Man-Bok
    • Resources Recycling
    • /
    • v.24 no.2
    • /
    • pp.23-28
    • /
    • 2015
  • Most of the domestic need for tin rely on imports. In this work, a pyrometallurgical process was investigated to recover pure tin from the tin oxides in tin bath which results from the production of flat glass and LCD panel. From the results on the effect of reaction temperature, the highest recovery percentage of tin was obtained at $1350^{\circ}C$. The recovery percentage of tin was improved to 88% by employing the first and second smelting step. Electrorefining of the crude tin thus obtained led to pure tin with purity higher than 99.9%.

A GUI-based the Recognition System for Measured Values of Digital Instrument in the Industrial Site (GUI기반 산업용 디지털 기기의 측정값 인식 시스템)

  • Jeon, Min-sik;Ko, Bong-jin
    • Journal of Advanced Navigation Technology
    • /
    • v.20 no.5
    • /
    • pp.496-502
    • /
    • 2016
  • In this paper, we proposed and implemented a GUI-based system to recognize and record measured values of digital instruments in the industrial site through image processing. Unlike the existing vehicle license plate recognition system, the measured values of the measuring instrument are displayed on the LCD screen as digital numbers. So, the proposed system considers the decimal point, a negative sign, light reflected by LCD protective glass, and various disturbance factors. We used blob-labeling technique to recognize the numbers displayed on the LCD screen, the recognized number images were determined as certain numbers through the template matching, and recognized values were recorded in the storage device with measurement time. Therefore, the proposed system in this paper would reduce the burden of writing when recording the measured values of the inside/outside diameter or height of the product in the industrial site, so effective and errorless process management in production process is possible by preventing errors in recording measurements when written by hand.

Development and Evaluation of an Self-Operated Face Capturing System (자가 안면영상 촬영장치 개발 및 검증)

  • Jeon, Young-Ju;Do, Jun-Hyeong;Kim, Jang-Wong;Kim, Sang-Gil;Lee, Hae-Jung;Lee, Yu-Jung;Kim, Keun-Ho;Kim, Jong-Yeol
    • Korean Journal of Oriental Medicine
    • /
    • v.17 no.2
    • /
    • pp.115-120
    • /
    • 2011
  • Objectives : The purpose of this study is to develop an apparatus which can take a facial image by self-operated capturing technique. The user can obtain one's facial image immediately after adjusting facial tilt and focusing distance. The system has been designed for classifying Sasang typology based on facial image. Methods : The system is composed of a Webcam, one-way glass mirror and mini LCD. The Webcam takes a facial image which is displayed on the mini LCD. Then the user can see and adjust to the right position in the real time through the image mirror-reflected from the mini LCD. The optical sensor is used to estimate the proper focusing distance. To verify the performance of the system, 11 characteristic points on the facial image are used and compared with high performance DSLR camera(D700) by applying the coefficient of variance and Bland-Altman Plot. Results : The developed system and D700 show enough agreement with the small coefficient of variance to analyse constitutional types with a facial im mage. However, the result of Bland-Altman plot shows that the width parameters have distortions owing to short focusing distance. Conclusions : The system is expected to be utilized on u-healthcare services for home environment after improving the distortion in the width parameters.

Flexible Display i Low Temperature Processes for Plastic LCDs

  • Han, Jeong-In
    • Transactions on Electrical and Electronic Materials
    • /
    • v.4 no.2
    • /
    • pp.10-14
    • /
    • 2003
  • Flexible displays such as plastic-based liquid crystal displays (LCDs) and organic light-emitting diode displays (OLEDDs) have been researched and developed at KETI since 1997. The plastic film substrate is very weak to heat and pressure compared to glass substrate, that its fabrication process is limited to 110$^{\circ}C$ and low pressure. The ITO films were deposited on the bare plastic film substrate by rf-magnetron sputtering. Moreover, in order to maintain uniform cell gap and pressure on the plastic film substrate, we utilized newly-invented jig and fabrication process. Electro-optical characteristics were better than or equivalent to those of typical glass LCDs though it is thinner, lighter-weight, and more robust than glass LCDs.

Strengthening of Substrate Glass for LCD by Single ton Exchange Process (Single Ion Exchange Process에 의한 LCD용 기판유리의 강화)

  • 이회관;오영석;이용수;강원호
    • Journal of the Korean Ceramic Society
    • /
    • v.39 no.7
    • /
    • pp.675-679
    • /
    • 2002
  • To produce a strengthened glass, single ion exchange properties such as three-point bend strength and residual stress were investigated in soda-lime-silicate substrate glass for display use. The present work showed that the maximum value of strength was 62.5${\times}$10$\sub$6/ kg/㎡ after, the two-step single ion exchange process at 470$^{\circ}C$ for 1 h and 450$^{\circ}C$ for 24 h. As the result of the fracture analysis after bending test, the residual stress on the fractured surface of the strengthened glass increased the flexibility by means of absorbing the elastic deformation energy in the glass. Also, the effects of absorbing the elastic deformation energy were analysed by curvature change, number of multiple crack branches and brittleness.

A study of the fresh properties of Recycled ready-mixed soil materials (RRMSM)

  • Huang, Wen-Ling;Wang, Her-Yung;Chen, Jheng-Hung
    • Computers and Concrete
    • /
    • v.17 no.6
    • /
    • pp.787-799
    • /
    • 2016
  • Climate anomalies in recent years, numerous natural disasters caused by landslides and a large amount of entrained sands and stones in Taiwan have created significant disasters and greater difficulties in subsequent reconstruction. How to respond to these problems efficaciously is an important issue. In this study, the sands and stones were doped with recycled materials (waste LCD glass sand, slag powder), and material was mixed for recycled ready-mixed soil. The study is based on security and economic principles, using flowability test to determine the water-binder ratio (W/B=2.4, 2.6, and 2.8), a fixed soil: sand ratio of 6:4 and a soil: sand: glass ratio of 6:2:2 as fine aggregate. Slag (at concentrations of 0%, 20%, and 40%) replaced the cement. The following tests were conducted: flowability, initial setting time, unit weight, drop-weight and compressive strength. The results show that the slump values are 220 -290 mm, the slump flow values are 460 -1030 mm, and the tube flow values are 240-590 mm, all conforming to the objectives of the design. The initial setting times are 945-1695 min. The unit weight deviations are 0.1-0.6%. The three groups of mixtures conform to the specification, being below 7.6 cm in the drop-weight test. In the compressive strength test, the water-binder ratios for 2.4 are optimal ($13.78-17.84kgf/cm^2$). The results show that Recycled ready-mixed soil materials (RRMSM) possesses excellent flowability. The other properties, applied to backfill engineering, can effectively save costs and are conducive to environmental protection.

Elastic Modulus Measurement of a Large Size Digital TV Display Unit (대형 Digital TV용 Display Unit의 강성 측정)

  • Kim Chang-Hoi;Moon Seong-In;Choi Jae-Boons;Kim Young-Jin;Lee Jeoung-Gwen;Koo Ja-Choon
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.22 no.3 s.168
    • /
    • pp.115-122
    • /
    • 2005
  • As the digital TV markets rapidly growing, many manufacturers introduce large size flat screen TV units. There are two different display types available to large size models which are plasma and TFT-LCD. Since both are constructed with thin large panels that are mostly fragile to even moderate mechanical shock inputs. Some large size panels are severely resonated by the acoustic sound generated TV which deteriorates video quality. Recognizing the potential problems of large displays, accurate measurement of the panels is to be an essential task for the reliable design. Measurement of mechanical properties of a thin large crystallized panel such as TFT-LCD display with traditional material testing equipments is challenging. Since TFT-LCDs are constructed with combination of brittle glass panels, polymer sheets, and liquid crystal, their properties are not only anisotropic but also usually non-linear. Accurate measurement of the properties often requires very expensive facilities. Especially when the size of the test sample is as large as 40-inch or wider, direct measurement cost is prohibitive. Even worse, machining of the large TFT-LCD to make a smaller size specimen that could be fit into a material tester is not possible because of liquid crystal leakage. A new method fer the measurement of elastic modulus of large TFT-LCD panel is presented in this article. The suggested method provides a simple, economic, and user-friendly way fer measuring the elastic modulus of large panels with considerable level of accuracy.

The assessment of applicable for waste LCD glass media by using foaming technology in non-point source (발포기술이 적용된 폐 LCD 유리 여재의 비점오염원에 대한 적용성 평가)

  • Yang, Jung-Min;Ahn, Tae-Woong;Choi, I-Song;Oh, Jong-Min
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2009.05a
    • /
    • pp.1817-1821
    • /
    • 2009
  • 최근 전자제품 사용의 증가로 인해 버려지는 전자제품의 양도 함께 증가하고 있으며 이렇게 늘어난 전자폐기물이 부적절한 방식으로 처리될 경우 우리에게 악영향을 미치는 위험물질이 될 수 있다. 본 연구에서는 이러한 전자폐기물 중 하나인 폐 LCD 유리를 이용한 수질정화용 여재를 이용하여 전자폐기물에 의한 오염을 줄이고, 동시에 강우시 표면 유출로 인하여 발생되는 비점오염을 제어하고자 하였다. 본 연구에서 이용한 수처리 여재는 기존 수처리 여재의 단점을 보완하는 대체 여재 개발이라는 목적에 적합할 것으로 판단된다. 이에 본 연구에서 발포기술이 적용된 폐 LCD 유리 여재의 비점오염에 의한 수질정화능력평가를 하기 위해 실험 장치를 구성하여 실험하였다. 반응조는 직경 0.10 m, 높이 0.75 m 크기(총용량= 5.89 $\ell$)로 두께 10mm의 투명 아크릴판으로 3조를 제작하였다. 유입수는 미량 펌프를 이용하여 유입하였다. 각 반응조의 체류시간에 의한 수질정화능력을 평가하였다. 연구 결과, 오염물질에 대한 제거효율 범위는 SS $64.1%\sim88.2%$, BOD $29.8\sim52.4%$, COD $56.8\sim66.1%$, T-N $39.4\sim\;52.3%$, T-P $14.1\sim36.8%$로 나타났다. 체류시간이 가장 길었던 반응조의 경우, 대부분의 측정항목에서 높은 처리 효율을 볼 수 있었다. 초기에 처리 효율이 낮은 것은 미생물이 부착되지 않았기 때문이라고 판단되며, 실험의 중반과 후반에서 미생물이 부착이 되는 시점부터 높은 처리효율을 보이는 것으로 나타났다.

  • PDF

Design Optimization and Endurance Assessment of Weld Area for LCD Robot Frame (LCD 로봇 주요 프레임에 대한 설계 최적화 및 용접부 수명평가)

  • Han, Sung Wook;Kang, Yun Sik;Kim, Teahyun;Kim, Sang Hyun
    • Transactions of the KSME C: Technology and Education
    • /
    • v.5 no.2
    • /
    • pp.89-95
    • /
    • 2017
  • LCD robot vertical frame lets a arm assembly with glass substrate move up and down, so it must have high stiffness and strength. We applied new manufacturing process by using design optimization process such as topology and size optimization in order to satisfy the request of high stiffness and light weight. The proposed model should be evaluated for endurance strength. Therefore fatigue assessment for weak point of aluminum welding area of vertical frame studied with hot spot stress approach. And the actual stress measuring from test was compared and evaluated with the dynamic stress calculated from multi-body dynamics considering flexible body.

Discharge Characteristics of Surface Discharge Type FFL for LCD Backlighting (LCD 백라이트용 면방전형 FFL의 방전 특성)

  • Lim, M.S.;Yun, S.H.;Shin, Y.S.;Jung, D.Y.;Kwon, S.S.;Lim, K.J.
    • Proceedings of the KIEE Conference
    • /
    • 1999.07d
    • /
    • pp.1786-1788
    • /
    • 1999
  • In this paper, we studied Surface Discharge Type Flat Fluorescent Lamp with High Luminance for LCD Backlighting, Liquid Crystal display(LCDs) demand the use of fluorescent lamp as the backlighting source. This lamp is Surface Discharge Type structure with a pair of Sodalime glass, insulator layer, phosphor layer, and Xe gas gap. In spite of its simple structure, the lamp has uniform and stable discharge over entire volume. Till now, we measured the current-voltage(V-I), Firing Voltage, Sustain Voltage for 0.5mm, 1mm electrode gap. In experiment result, long gap cell structure cause high firing voltage. The rising in firing voltage in long gap structure could not be explained by paschen's law because of non-uniform electric field.

  • PDF