• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.393-396
• /
• 1996

This paper studies electrostatically suspended induction motors (ESIM). The ESIM possesses the rotating ability of an ordinary electrostatic induction motor, in addition to providing contactless support by electrostatic suspension. To accomplish these two functions, a feedback control strategy and the operating principle of an ordinary electrostatic induction motor are used. The stator possesses electrodes which exert the electrostatic forces to the rotor and are divided into a part responsible for suspension and one for rotation. Two rotor types are utilized: a polished glass disk without any surface treatment, and a polished glass disk covered with a thin layer of conductive material (ITO layer) on only one side. In this paper, the principle of the ESIM is described, followed by stator electrode design, experimental apparatus, control strategy for stable suspension. Experimental results show that the glass disk has been rotated with a speed of approximately 70 rpm while being suspended stably at a gap length of 0.3 mm.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.78-78
• /
• 2009

Glass sealing method is used glass bond as called frit in LCD, PDP process. but new sealing method is need to consider the endurance and economy. This paper present the new glass sealing method using high density gas torch in the furnace and process variable are defined by experiment. Taguchi Robust Experimental Design methods were applied for optimizing these four main processing parameters.

• 한국생산제조학회지
• /
• 제25권6호
• /
• pp.440-444
• /
• 2016

Owing to the introduction of various IT devices with emphasis on portability and design, the TFT (thin film transistor liquid crystal display) panel applied to IT devices has the same shape as the product, and the portability requirement of IT devices has resulted in a need for panels with higher rigidity. In this study, the effect of grinding conditions such as the feed rate and edge speed of edge grinding on the surface roughness and chipping of the machined surface is investigated using a metal bond wheel. During edge grinding of alkari-free glass, weak mechanical property of glass results in big chipping owing to generation of tensile stress at the end of grining operation. The results of this study show that the grinding characteristics of alkali-free glass are obtained and meet industry requirements.

• 한국재료학회지
• /
• 제18권5호
• /
• pp.247-252
• /
• 2008

A laser glass cutting system using a femto-second laser was evaluated for Flat Panel Display (FPD) glass. A theoretical analysis of the ablation threshold and depth is described using an explicit analytic form. Experiments for clean and deep grooves were performed using a 3W femto-second laser, and the relationships between the input energy and the scribing depth as well as the threshold energy are presented. Mechanical breaking after the scribing process was carried out and the results are compared with a theoretical method. It was found that a two-sided LCD panel glass can be cut clearly using the laser cutting method. The methodology was found to be very effective as a mass-production cutting system.

• 한국산학기술학회논문지
• /
• 제11권3호
• /
• pp.795-801
• /
• 2010

LCD (Liquid Crystal Display) 제조기술이 발전함에 따라 유리기판은 점차 대형화되는 추세이고 제조공정도 세밀화되어 감에 따라 LCD 제조과정에서 세정공정의 중요성이 부각되고 있다. 본 연구에서는 물리적 세정방법 중 브러쉬 (brush), 버블제트 (bubble jet) 및 이류체 (aqua/air) 세정법을 이용하여 미립자 (particles) 제거효율을 비교 평가하였다. 7세대 LCD 유리기판 ($1875\;mm\;{\times}\;2200\;mm$)을 대상으로 초순수 (deionized water)의 유량 및 압력 변화와 브러쉬의 모(毛)와 유리기판과의 접촉깊이 (contact depth) 등의 운전조건 변화를 통하여 미립자의 제거효율을 비교하였고 각 세정법에 의한 유의차 분석을 통해 향후 세정장비 개발에 유용한 자료로 활용하고자 하였다. 브러쉬 세정의 경우 브러쉬 접촉깊이에 변화를 주었을 때 임계점부터는 세정효율에 유의차가 크지 않음을 알 수 있었다. 버블제트 세정은 압력변화에 따른 세정력 유의차가 거의 없음을 관찰할 수 있었으며, 이류체 세정은 압력변화시 임계점까지는 세정력 유의차가 존재하나 임계점 이후부터는 유의차가 발생하지 않았다. 상기 3가지 세정방법 중 브러쉬 세정이 주어진 조건에서는 세정효과가 가장 큰 것으로 나타났다.

• 한국전기전자재료학회논문지
• /
• 제21권3호
• /
• pp.265-271
• /
• 2008

TCP(Tape Carrier Package), COG (Chip On Glass), COF(Chip On Film) are three methods for connecting LDI(LCD Driver IC) with LCD panels. Especially COF is growing its portion of market place because of low cost and fine pitch correspondence. But COF has a problem of the lead broken failure in LCD module process and the usage of customer. During PCB (Printed Circuit Board) bonding process, the mismatch of the coefficient of thermal expansion between PCB and D-IC makes stress-concentration in COF lead, and also D-IC bending process during module assembly process makes the level of stress in COF lead higher. As an affecting factors of lead-broken failure, the effects of SR(Solder Resister) coating on the COF lead, surface roughness and grain size of COF lead, PI(Polyimide) film thickness, lead width and the ACF(Anisotropic Conductive Film) overlap were studied, The optimization of these affecting manufacturing processes and materials were suggested and verified to prevent the lead-broken failure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.300-300
• /
• 2008

In this study, the advanced DuoPIGatron-type ion beam (IB) system was applied to inorganic thin film for aligning liquid crystal (LC). LC alignment on $Ta_2O_5$ via IB irradiation was embodied. As a result of IB irradiation, the homogeneously aligned liquid crystal display (LCD) on $Ta_2O_5$ was observed with low pretilt angles. The $Ta_2O_5$ were deposited on indium-tin-oxide coated Coming 1737 glass substrates by rf magnetron sputtering at $200^{\circ}C$. The deposition process resulted in forming very uniform thin film on glass substrates without any defects. To confirm the application of the inorganic alignment on modem display optical devices, we fabricated twisted nematic LCD and measured optical property and response time. As a result of the experiment, the electro optical characteristics of the LCD fabricated by using IB irradiation on $Ta_2O_5$ alignment layer were similar with the other LCD fabricated by using rubbing process.

• 대한기계학회논문집A
• /
• 제29권3호
• /
• pp.455-461
• /
• 2005

This research studied robust design of composite hand for LTR (LCD glass Transfer Robot). $1^{st}$ DOE (Design of Experiment) was conducted to find out vital few Xs. 108 experiments were performed and their results were statistically analyzed. Pareto chart analysis shows that the geometric parameters (height and width of composite beam) are more important than material parameters $(E_{1},\;E_{2})$ or stacking sequence angle. Also, the stacking sequence of mid-layer is more important than that of outer-layer. The main effect plots shows that the maximum deflection of LTR hand is minimized with increasing height, width of beam and layer thickness. $2^{nd}$ DOE was conducted to obtain RSM (Response Surface Method) equation. 25 experiments were conducted. The CCD (Central Composite Design) technique with four factors was used. The coefficient of determination $(R^{2})$ for the calculated RSM equation was 0.989. Optimum design was conducted using the RSM equation. Multi-island genetic algorithm was used to optimum design. Optimum values for beam height, beam width, layer thickness and beam length were 24.9mm, 186.6mnL 0.15mm and 2402.4mm respectively. An approximate value of 0.77mm in deflection was expected to be a maximum under the optimum conditions. Six sigma robust design was conducted to find out guideline for control range of design parameter. To acquire six sigma level reliability, the standard deviation of design parameter should be con trolled within $2{\%}$ of average design value

• The Journal of Korean Physical Therapy
• /
• 제14권3호
• /
• pp.1-23
• /
• 2002

Purpose: The purpose of this study was to examine the relationship between pigmental reaction and blood components, such as white blood cell (WBC), lymphocyte, monocyte, red blood cell (RBC), hemoglobin, mean corpuscular index (mean corpuscular volume (MCV), mean corpuscular hemoglobin (MCH) and mean corpuscular hemoglobin concentration (MCHC)), hematocrit, platelet and neutrophil segment, after Cupping Glass Therapy (CGT). Subjects: Twenty-five healthy adults participated in this study; Methods: Subjects had undergone CGT for 5 days and were divided into two groups (dark color (DCG) and light color (LCG)) depending the level of pigmental reaction. Blood was collected from each subject at the beginning of this study and recollected after 5 day s'CGT. Results: The percentage of lymphocytes was higher in LCG than in DCG after CGT (p<.01) and was significantly increased in LCD after CGT (p<.01), The number of RBC was more in DCG than in LCG both before (p<.01) and after CGT (p<.05). The amount of hemoglobin was more in DCG than in LCG both before (p<.01) and after CGT (p<.01) and was significantly increased in LCD after CGT (p<.01). Mean corpuscular index showed that both MCH (p<.05) and MCHC (p<.01) were higher in DCG than in LCG after CGT, but only MCHC before CGT (p<.01). It also showed either decreased MCV (p<.01) or increased MCHC in LCD after CGT (p<.01). Hematocrite was higher in DCG than in LCG both before (p<.01) and after CGT (p<.01). The percentage of neutrophil segments was higher in BCG than In LCG after CGT (p<.01) and was significantly decreased in LCD after CGT (p<.05). However, neither the number of WBC and platelets nor the percentage of monocytes was significantly different between DCG and LCG either before or after CGT. Conclusion: Pigmental reaction was significantly related to the changes of blood conponents after CGT. The results of this study suggest that CGT may have an effect on the components of blood cells.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1005-1008
• /
• 2008

Electronic Paper Displays (EPDs) incorporating electrophoretic foils have made digital reading as pleasant as reading normal print. We will report on progress to replace glass-based displays with light and robust plastic EPDs using only a few extra process steps in a standard TFT-LCD factory.