• 제목/요약/키워드: LCD Equipment

검색결과 143건 처리시간 0.03초

무선 체온 모니터기 아키텍처 하드웨어 개발 (Development of Hardware for the Architecture of A Remote Vital Sign Monitor)

  • 장동욱;장성환;정병조;조현섭
    • 한국산학기술학회논문지
    • /
    • 제11권7호
    • /
    • pp.2549-2558
    • /
    • 2010
  • 무선 체온 모니터기는 무선으로 체온을 모니터 하기 위해 설계된 건강관리 시스템이다. 무선 체온 모니터기는 낮은 가격과 손쉬운 사용방법으로 병원 장치와 비교할만한 정확도와 몇몇 특성들을 제공한다. 무선 체온 모니터기는 밴드 파트와 모니터 파트로 구성되어 있다. 밴드 파트와 모니터 파트 모두 2.4GHz 직접 시퀀스 확산 스펙트럼 라디오가 내장되어 있는 칩콘2430, 일명 CC2430라는 마이크로 칩으로 사용한다. 이 CC2430은 무선 체온 모니터기가 집안 100피트 반경까지 상호 작동할 수 있게 해준다. 간단한 사용자 환경은 사용자로 하여금 손쉽게 고온과 저온의 한계점을 세팅할 수 있게 되어있다. 만약 사용자의 체온이 고온과 저온의 한계점을 넘어섰을 때 알람이 울리게 되어 있다. 알람은 저전압 오디오 증폭기와 스피커에 연결되어 작동되게 되어있다. 정확한 체온을 계산하기 위해 무선 체온 모니터기는 반드시 정확한 온도 검출장치를 사용해야만 한다. GE Sensing에서 선택된 서미스터는 온도 측정의 예민함과 정확함을 모두 만족시킨다. LCD 화면은 길이 64.5mm 폭 16.4mm의 백라이트 기능을 가추고 있으며 이 기능은 사용자가 어두운 환경이나 밝은 환경에서도 적어도 3피트 거리에서 화면을 모니터 할 수 있게 해준다.

Gravure Offset 인쇄에 의한 미세 전극용 Ag Paste 개발 (Gravure Offset Printed on Fine Pattern by Developing Electrodes for the Ag Paste)

  • 이상윤;장아람;남수용
    • 한국인쇄학회지
    • /
    • 제30권3호
    • /
    • pp.45-56
    • /
    • 2012
  • Printing technology is accepted by appropriate technology that smart phones, tablet PC, display(LCD, OLED, etc.) precision recently in the electronics industry, the market grows, this process in the ongoing efforts to improve competitiveness through the development of innovative technologies. So printed electronics appeared by new concept. This technology development is applied on electronic components and circuits for the simplification of the production process and reduce processing costs. Low-temperature process making possible for widening, slimmer, lighter, and more flexible, plastic substrates, such as(flexible) easily by forming a thin film on a substrate has been studied. In the past, the formation of the electrode used a screen printing method. But the screen printing method is formation of fine patterns, high-speed printing, mass production is difficult. The roll-to-roll printing method as an alternative to screen printing to produce electronic devices by printing techniques that were used traditionally in the latest technology and processing techniques applied to precision control are very economical to implement fine-line printing equipment has been evaluated as. In order to function as electronic devices, especially the dozens of existing micro-level of non-dot print fine line printing is required, the line should not break at all, because according to the specifications required to fit the ink transfer conditions should be established. In this study of roll-to-roll printing conductive paste suitable for gravure offset printing by developing Ag paste for forming fine patterns to study the basic physical properties with the aim of this study were to.

고속 운전용 건식진공펌프 로터-베어링 시스템의 회전체동역학 해석 (Rotordynamic Analysis of a Dry Vacuum Pump Rotor-Bearing System for High-Speed Operation)

  • 이안성;이동환;김병옥
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2006년도 추계학술대회논문집
    • /
    • pp.523-530
    • /
    • 2006
  • A rotordynamic analysis was performed with a dry vacuum pump, which is a major equipment in modern semiconductor and LCD manufacturing processes. The system is composed of screw rotors, lobes picking air, helical gears, driving motor, and support rolling element hearings of rotors and motor. The driving motor-screw rotor system has a rated speed of 6,300rpm, and was modeled utilizing a rotordynamic FE method for analysis, which was verified through the results of its 3-D finite element model. As loadings on the bearings due to the gear action were significant in the system considered, each resultant bearing load was calculated determinately and indeterminately by considering the generalized forces of the gear action as veil as the rotor itself. Each resultant hearing loading was used in calculating each stiffness of rolling element bearings. Design goals are to achieve wide separation margins of critical speeds and favorable unbalance responses of the rotor in the operating range. Then, a complex rotordynamic analysis of the system was carried out to evaluate its forward synchronous critical speeds, whirl natural frequencies and mode shapes, and unbalance responses under various unbalance locations. Results show that the entire system is well designed in the operating range. In addition, the procedure of rotordynamic analysis for dry vacuum pump rotor-bearing system was proposed and established.

  • PDF

한국 디스플레이산업 가치사슬별 소재부품 및 장비기업의 성장과 혁신 특성 (The Characteristics of Corporate Growth and Innovation in the Materials, Components, and Equipments Sectors of Korean Display Industrial Value Chain)

  • 김갑수
    • 기술혁신학회지
    • /
    • 제20권1호
    • /
    • pp.205-238
    • /
    • 2017
  • 디스플레이산업은 세계 최고의 수준을 달성한 한국의 대표적 주력 산업이다. LCD 패널의 대표기업들을 중심으로 한 기존의 연구와는 달리, 본 연구는 가치사슬 관점과 아키텍처 관점을 결합하여 후방가치사슬(upstream) 영역에 속한 소재부품 장비 공급기업에 중점을 둔 산업의 발달구조와 발전추이 특성을 분석하였다. 2002년부터 2015년까지 208개 기업에 대한 매출액 및 연구개발비 자료를 활용하여, 산업의 가치사슬별 성장 및 혁신 특성을 분석하였다. 결과, 소재부품기업과 장비기업은 패널 제조 공정별로 상반된 발전 추이가 있음을 규명하였다. 본 연구는 디스플레이산업과 같이 대규모 시스템 공정산업의 경우는 공정산업의 특성을 반영하여 기존의 가치사슬 관점에 아키텍처 혁신 관점을 반영한 분석 틀을 통하여 향후 산업 기술 전략과 정책의 방향을 제시하였다는 점에 의의가 있다.

고속 운전용 건식진공펌프 로터-베어링 시스템의 전체동역학 해석 (A Rotordynamic Analysis of Dry Vacuum Pump Rotor-Bearing System for High-Speed Operation)

  • 김병옥;이안성;노명근
    • 한국유체기계학회 논문집
    • /
    • 제10권3호
    • /
    • pp.47-54
    • /
    • 2007
  • A rotordynamic analysis was performed with a dry vacuum pump, which is a major equipment in modem semiconductor and LCD manufacturing processes. The system is composed of screw rotors, lobes picking air, helical gears, driving motor, and support rolling element bearings of rotors and motor. The driving motor-screw rotor system has a rated speed of 6,300rpm, and was modeled utilizing a rotordynamic FE method for analysis, which was verified through the results of its 3-D finite element model. As loadings on the bearings due to the gear action were significant in the system considered, each resultant bearing load was calculated determinately and indeterminately by considering the generalized forces of the gear action as well as the rotor itself. Each resultant bearing loading was used in calculating each stiffness of rolling element bearings. Design goals are to achieve wide separation margins of critical speeds and favorable unbalance responses of the rotor in the operating range. Then, a complex rotordynamic analysis of the system was carried out to evaluate its forward synchronous critical speeds, whirl natural frequencies and mode shapes, and unbalance responses under various unbalance locations. Results show that the entire system is well designed in the operating range. In addition, the procedure of rotordynamic analysis for dry vacuum pump rotor-bearing system was proposed and established.

What Is the Key Vacuum Technology for OLED Manufacturing Process?

  • 백충렬
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.95-95
    • /
    • 2014
  • An OLED(Organic Light-Emitting Diode) device based on the emissive electroluminescent layer a film of organic materials. OLED is used for many electronic devices such as TV, mobile phones, handheld games consoles. ULVAC's mass production systems are indispensable to the manufacturing of OLED device. ULVAC is a manufacturer and worldwide supplier of equipment and vacuum systems for the OLED, LCD, Semiconductor, Electronics, Optical device and related high technology industries. The SMD Series are single-substrate sputtering systems for deposition of films such as metal films and TCO (Transparent Conductive Oxide) films. ULVAC has delivered a large number of these systems not only Organic Evaporating systems but also LTPS CVD systems. The most important technology of thin-film encapsulation (TFE) is preventing moisture($H_2O$) and oxygen permeation into flexible OLED devices. As a polymer substrate does not offer the same barrier performance as glass substrate, the TFE should be developed on both the bottom and top side of the device layers for sufficient lifetimes. This report provides a review of promising thin-film barrier technologies as well as the WVTR(Water Vapor Transmission Rate) properties. Multilayer thin-film deposition technology of organic and inorganic layer is very effective method for increasing barrier performance of OLED device. Gases and water in the organic evaporating system is having a strong influence as impurities to OLED device. CRYO pump is one of the very useful vacuum components to reduce above impurities. There for CRYO pump is faster than conventional TMP exhaust velocity of gases and water. So, we suggest new method to make a good vacuum condition which is CRYO Trap addition on OLED evaporator. Alignment accuracy is one of the key technologies to perform high resolution OLED device. In order to reduce vibration characteristic of CRYO pump, ULVAC has developed low vibration CRYO pumps to achieve high resolution alignment performance between Metal mask and substrate. This report also includes ULVAC's approach for these issues.

  • PDF

공장 자동화 품질관리를 위한 자동 시각 검사 시스템의 기술 훈련 (Technical Training on Automated Visual Inspection System for Factory Automation Quality Assurance)

  • 고진석;임재열
    • 한국실천공학교육학회논문지
    • /
    • 제4권2호
    • /
    • pp.91-97
    • /
    • 2012
  • 제조현장에서 품질검사를 위하여 사용되는 자동 시각 검사 장비는 국내뿐 아니라 일본, 대만 등 LCD 관련 제조사를 포함하여 세계적 제조업 기반 기업들의 공장 자동화 시스템에 주요 장비로 자리 잡고 있다. 자동 시각 검사 장비는 일반적으로 머신비전 시스템이라 부르며, 세계시장에서 머신비전 시스템 컴포넌트 분야에서만 2010년 기준으로 112억 달러에 이르고 2015년에 180억을 돌파할 것으로 예상하고 있으며, 이는 연간 9%의 성장률을 예측하고 있어, 잠재적 시장 가능성이 큰 분야임을 알 수 있다. 그러나 직업전문학교, 대학 등에서는 머신비전 시스템에 대한 교육이 거의 이뤄지지 못하고 있는 상황이다. 본 논문에서는 산업현장에서 널리 사용되는 머신비전과 관련하여 교육의 필요성 및 수요분석 등을 통하여 교육 수요자들이 효과적으로 기술을 습득할 수 있도록 교육훈련 프로그램을 제안하였다. 제안된 방법은 기술 수요자의 수준에 따라서 총 훈련시간이 30시간에서 60시간으로 탄력적으로 운용될 수 있으며, 전공 분야에 따라서 선택적으로 훈련을 받을 수 있도록 구성되었다.

  • PDF

절삭 공구용 다이아몬드 복합체의 저온 저압 소결 합성 및 후속 도전형 박막 공정 특성 연구 (A Study on the Sintering of Diamond Composite at Low Temperature Under Low Pressure and its Subsequent Conductive PVD Process for a Cutting Tool)

  • 조민영;반갑수
    • 한국산업융합학회 논문집
    • /
    • 제23권1호
    • /
    • pp.25-32
    • /
    • 2020
  • Generally, high-temperature, high-pressure, high-priced sintering equipment is used for diamond sintering, and conductivity is a problem for improving the surface modification of the sintered body. In this study, to improve the efficiency of diamond sintering, we identified a new process and material that can be sintered at low temperature, and attempted to develop a composite thin film that can be discharged by doping boron gas to improve the surface modification of the sintered body. Sintered bodies were sintered by mixing Si and two diamonds in different particle sizes based on CIP molding and HIP molding. In CVD deposition, CVD was performed using WC-Co cemented carbide using CH4 and H2 gas, and the specimen was made conductive using boron gas. According to the experimental results of the sintered body, as the Si content is increased, the Vickers hardness decreases drastically, and the values of tensile strength, Young's modulus and fracture toughness greatly increase. Conductive CVD deposited diamond was boron deposited and discharged. As the amount of boron added increased, the strength of diamond peaks decreased and crystallinity improved. In addition, considering the release processability, tool life and adhesion of the deposition surface according to the amount of boron added, the appropriate amount of boron can be confirmed. Therefore, by solving the method of low temperature sintering and conductivity problem, the possibility of solving the existing sintering and deposition problem is presented.

COG 본딩의 접합 특성에 관한 연구 (A Study on the Bonding Performance of COG Bonding Process)

  • 최영재;남성호;김경태;양근혁;이석우
    • 한국정밀공학회지
    • /
    • 제27권7호
    • /
    • pp.28-35
    • /
    • 2010
  • In the display industry, COG bonding method is being applied to production of LCD panels that are used for mobile phones and monitors, and is one of the mounting methods optimized to compete with the trend of ultra small, ultra thin and low cost of display. In COG bonding process, electrical characteristics such as contact resistance, insulation property, etc and mechanical characteristics such as bonding strength, etc depend on properties of conductive particles and epoxy resin along with ACF materials used for COG by manufacturers. As the properties of such materials have close relation to optimization of bonding conditions such as temperature, pressure, time, etc in COG bonding process, it is requested to carry out an in-depth study on characteristics of COG bonding, based on which development of bonding process equipment shall be processed. In this study were analyzed the characteristics of COG bonding process, performed the analysis and reliability evaluation on electrical and mechanical characteristics of COG bonding using ACF to find optimum bonding conditions for ACF, and performed the experiment on bonding characteristics regarding fine pitch to understand the affection on finer pitch in COG bonding. It was found that it is difficult to find optimum conditions because it is more difficult to perform alignment as the pitch becomes finer, but only if alignment has been made, it becomes similar to optimum conditions in general COG bonding regardless of pitch intervals.

고효율 복합형 진공펌프의 로터다이나믹 해석 (A Rotordynamics Analysis of High Efficiency and Hybrid Type Vacuum Pump)

  • 김병옥;이안성;노명근
    • 한국소음진동공학회논문집
    • /
    • 제17권10호
    • /
    • pp.967-975
    • /
    • 2007
  • A rotordynamic analysis was performed with a dry vacuum pump, which is a major equipment in modern semiconductor and LCD manufacturing processes. The system is composed of screw rotors, lobes picking air, helical gears, driving motor, and support rolling element bearings of rotors and motor. The driving motor-screw rotor system has a rated speed of 6,300 rpm, and was modeled utilizing a rotordynamic FE method for analysis, which was verified through 3-D FE analysis and experimental modal analysis. As loadings on the bearings due to the gear action were significant in the system considered, each resultant bearing load was calculated by considering the generalized forces of the gear action as well as the rotor itself. Each resultant bearing loading was used in calculating each stiffness of rolling element bearings. Design goals are to achieve wide separation margins of lateral and torsional critical speeds, and favorable unbalance responses of the rotor in the operating range. Then, a complex rotordynamic analysis of the system was carried out to evaluate its forward synchronous critical speeds, whirl natural frequencies and mode shapes, unbalance responses under various unbalance locations, and torsional interference diagram. Results show that the entire system is well designed in the operating range. In addition, the procedure of rotordynamic analysis for dry vacuum pump rotor-bearing system was proposed and established.