• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.676-677
• /
• 2015

최근 사물인터넷(IoT)의 기반이 되는 아두이노 기술을 접목하여 다양한 스위치와 센서로 입력 값을 받아들여 LED, 모터와 같은 외부출력장치를 제어함으로써 상호 작용을 만들어 낼 수 있는 시스템개발이 유행이다. 본 논문에서는 아두이노를 이용하고 여러 가지 센서들을 활용하여 RC카 제작 및 거리제어 센서를 통한 DC모터 정지와 RFID를 통하여 LCD광고를 할 수 있는 자동차 시스템을 개발하였다. 개발한 시스템은 모터제어를 통하여 RC카의 전진과, 후진, 좌, 우 등 서브모터와, DC모터를 제어 하게 하였으며, 모터제어를 한 RC카에 블루투스 모듈을 장착하여 블루투스를 통하여 스마트폰으로 조종이 가능하도록 하였다. 안드로이드 어플을 사용하는 과정 중에 멈춤 오류로 인하여 S값을 한번만주는 형식의 안드로이드 어플을 이클립스로 제작하여 수정하였으며 전방에 거리감지센서를 장착하여 자동차의 20~150cm앞에 물체가 있을시 모터를 정지하게 하여 속도를 제어 하도록 하였다. 또한 RFID리더기를 사용하여 태그키가 RFID리더기에 태그 될시 LCD화면에 광고를 노출할 수 있게 하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.1525-1527
• /
• 2013

본 논문에서는 저시력자의 개선된 독서 환경을 제공하는 시각보조기기를 위한 실시간 영상처리 SoC(System on Chip) 하드웨어 구조 설계에 대해서 기술한다. 기존의 시각보조기기는 화면 영상이 실제 움직임보다 늦게 출력되는 잔상 현상이 발생하며, 색 변환 기능도 제한적이다. 따라서 본 논문에서 제안하는 실시간 영상처리 SoC 하드웨어 구조는 데이터 연산을 최소화함으로써 잔상 현상이 감소되며, 저시력자를 위한 다양한 색상 모드를 지원한다. 제안하는 영상처리 SoC 하드웨어 구조는 Core-A 모듈, Memory Controller 모듈, AMBA AHB bus 모듈, ISP(Image Signal Processing) 모듈, TFT-LCD Controller 모듈, VGA Controller 모듈, CIS Controller 모듈, UART 모듈, Block Memory 모듈로 구성된다. 시각보조기기를 위한 실시간 영상처리 SoC 하드웨어 구조는 Virtex4 XC4VLX80 FPGA 디바이스를 이용하여 검증하였으며, TSMC 180nm 셀 라이브러리로 합성한 결과 동작주파수는 54MHz, 게이트 수 197k이다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.6
• /
• pp.31-38
• /
• 2009

To improve the image quality and lower the power consumption of the mobile applications, it is the one of the best candidate to control the backlight unit of the LCD module with ambient light. Ambient light sensor and readout circuit were integrated in LCD panel for the mobile applications, and we designed them with LTPS TFT. We proposed noble start-up correction in order to correct the variation of the photo sensors in each panel. We used time-to-digital method for converting photo current to digital data. To effectively merge time-to-digital method with start-up correction, we proposed noble dual slope correction method. The entire readout circuit was designed and estimated with LTPS TFT process. The readout circuit has very simple and stable structure and timing, so it is suitable for LTPS TFT process. The readout circuit can correct the variation of the photo sensors without an additional equipment, and it outputs the 4-levels digital data per decade for input luminance that has a dynamic range of 60dB. The readout rate is 100 times/sec, and the linearity error for digital conversion is less than 18%.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.2
• /
• pp.31-37
• /
• 2015

Recently, mobile phones have become necessary tools for everyday life. In this study, a device that can serve as a separation between a touch panel and an LCD module in a mobile phone was devised for mass repair processes at a smaill business. We used a wire cutting method to separate the bonding plate area between the modules. The device is composed of DC motors and stepping motors that can deliver a precise cutting motion. The motor control system is connected by individual control modules to a CAN network. The developed device showed excellent performance at high temperature conditions.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.4
• /
• pp.93-97
• /
• 2010

Fast incipient fault diagnosis is becoming one of the key requirements for economical and optimal process operation management in high-tech industries. Artificial neural networks have been used to detect faults for a number of years and shown to be highly successful in this application area. This paper presents a novel test technique for fault detection and classification for module process of TFT-LCD manufacture using support vector machines (SVMs). In order to evaluate SVMs, this paper examines the performance of the proposed method by comparing it with that of multilayer perception, one of the artificial neural network techniques, based on real benchmarking data.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1379-1386
• /
• 2023

In this paper, research was conducted to prevent various safety accidents that may occur from infant carriages carrying children and to make the use of infant carriages easier. In order to prevent the baby car from running without protection, a brake function is installed on the baby car wheels using a pressure sensor and a servo motor. Then, a pressure sensor and LCD are used to determine whether the seat belt is fastened to prevent the child from falling out of the baby car. In addition, it was designed to use LCD and LED to turn on a warning light when the temperature and humidity exceed a certain level, so that infants can be in a comfortable environment when using the baby car.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1266-1274
• /
• 2006

A non-overlap boosted-clock charge pump(NBCCP) with internal pumping capacitor, an advantageous circuit from a minimizing point of TFT-LCD driver IC module, is proposed in this paper. By using the non-overlap boosted-clock swinging in 2VDC voltage, the number of pumping stages is reduced to half and a back current of pumping charge from charge pumping node to input stage is also prevented compared with conventional cross-coupled charge pump with internal pumping capacitor. As a result, pumping current of the proposed NBCCP circuit is increased more than conventional cross-coupled charge pump, and a layout area is decreased. A proposed DC-DC converter for TFT-LCD driver IC is designed with $0.18{\mu}m$ triple-well CMOS process and a test chip is in the marking.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.10
• /
• pp.945-954
• /
• 2004

Recently, specifications of flat display module is going to be higher definition, brightness and more wide viewing angle. On the other hand, physical thickness of those modules is forced to be slimmer and lighter. The flat display modules such as plasma or TFT-LCD employ thin crystallized panels that are normally weak to high level transient mechanical energy inputs. As a result, anti-shock performance is one of the most important design specifications of TFT-LCD modules. TFT-LCD module manufacturers and their customers like PC or TV makers perform a series of strict impact/drop test for the modules. However most of the large display module designs are generated based on engineer's own trial-error experiences. Those designs may result in disqualification from the drop/impact test during final product evaluation. A rigorous study on the impact failure of the displays is of course necessitated in order to avoid the problems. In this article, a systematic design evaluation is presented with combinations of FEM modeling and testing to support the optimal shock proof display design procedure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.462-468
• /
• 2010

In this paper, the new efficient drive control technology based on the conventional full-color electric display board image processing method is proposed. This technology can be applied to high-fidelity large size panel TV and LCD Display, and makes high-fidelity-display-drive control possible in those. The proposed drive control technology can strengthen the image processing function of the conventional technology. Also, the automatic or manual adjustment of contrast, bright, tint, color, gamma revision, etc. can help to achieve high-fidelity vision. This technology can be adopted with lower price.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.9
• /
• pp.1043-1049
• /
• 2014

In this paper, we design and implement a digital LCD stopwatch function of the remote control. The central controller and LCD stopwatch is implemented based on the clock signal of the crystal oscillator of 8MHz by using ATmega8 processor in the AVR representative series of ATMEL, Communication module basic, ZBS-using the ISM 2.4GHz frequency band at 100. Stopwatch of remote control that has been proposed, it is possible to solve the three problems. First, it is possible to solve the sight deviation between broadcast camera and panelists glance to large LCD stopwatch monitors. Second, it is possible to avoid the trouble of broadcasting cameras cross replacement, Third, it is possible to minimize the inconvenient of the viewer corresponding to the operation of the horizontal movement of the broadcast camera.