• Biomedical Science Letters
• /
• v.28 no.4
• /
• pp.322-326
• /
• 2022

The purpose of this study was to develop hydrolysate from silkworm (Cudrania Silkworm Fibroin Peptide; CSFP), a food containing components for improving blood vessel health. In general, Cudrania tricuspidata leaves contain about 5 times more rutin and 25 times more dihydroquercetin than mulberry leaves. 1-Deoxynojirimycine (1-DNJ), dihydroquercetin and rutin inhibit the activity of carbohydrate-digesting enzymes, inhibit blood lipid peroxidation, and regulate insulin secretion, which helps blood vessels to be healthy. When the diet-controlled silkworm was enzymatically hydrolyzed, it was confirmed that rutin content was about 8 times higher than that of the in general silkworm as a control. In the silkworm hydrolysate, CSFP, developed as a final food material, the active ingredients were 65 mg/kg for rutin, 3,328 mg/kg for DNJ, 0.43 mg/kg for dihydroquercetin, and 82,624 mg/kg for total polyphenol, which was confirmed through LC-MS/MS analysis. In conclusion, it was found that silkworms fed with C. tricuspidata leaves as a diet had more active components that can help control blood sugar and improve blood vessel health than silkworms fed with mulberry leaves.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.358-373
• /
• 1997

Resin modified glass ionomers were introduced in 1988 to overcome the problems of moisture sensitivity and low early mechanical strength of conventional glass ionomers and to maintain their clinical advantages. The purpose of this study was to evaluate the color stability of four resin modified glass ionomers(Fuji II LC, Vitremer, Dyract and VariGlass), one resin composite material(Z-100), and one conventional glass ionomer(GC Fuji II) under several conditions. These conditions were as follows: 1) before curing, 2) after curing, 3) after polishing, 4) after 500 thermocycling, 5) after 1,000 thermocycling, 6) after 1,500 thermocycling and 7) after 2,000 thermocycling. Three specimens of each material/shade combination were made. Materials were condensed into metal mold with a diameter of 10 mm and a thickness of 2.0 mm, and were pressed between glass plates. The material was polymerized using a light polymerizing unit(Visilux II, 3M, USA). After removal of excess, the surface was polished sequentially on wet sandpapers. A reflection spectrophotometer(Model TC-6FX, Tokyo Denshoku Co., Japan) was used to determine CIELAB coordinates($L^*,a^*$ and $b^*$) of each specimen. CIE standard illumination C was used as the light source. The results were as follows : 1. In comparing different shades of same material, CIELAB color difference(${\Delta}E^*$) value was not significantly different from each other(p>0.05). 2. CIELAB color difference(${\Delta}E^*$) values between after-curing and after-polishing were ranged from 5.53 to 27.08. These values were higher than those of other condition combinations. 3. CIELAB color difference(${\Delta}E^*$) values between before-thermocycling and after-thermocycling were ranged from 1.40 to 7.81. Despite the number of thermocycling increased, CIELAB color difference(${\Delta}E^*$) value was low. 4. The color stability of resin modified glass ionomers was more stable than that of conventional glass ionomers but less stable than that of Z100.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.2
• /
• pp.197-205
• /
• 2022

This study was conducted to investigate the fluoride release of fluoride-containing restorative materials in fluoride recharging according to the concentration of fluoride toothpaste used in Korea. Samples of glass ionomer cement, resin-modified glass ionomer cement, alkasite restorative material, and composite resin were prepared and fluoride release was measured on days 1, 3, 7, 14, 21, 28. Thereafter, fluoride-free, 500 ppm, and 1450 ppm fluoride toothpaste was applied to each restorative materials, and the fluoride release was measured on days 1, 3, 7. Glass ionomer cement showed the highest cumulative fluoride release until the 7th day of measurement, and from the 14th day onwards, the resin-modified glass ionomer cement showed the highest cumulative fluoride release, but there was no significant difference. When restorative material groups were recharged with 500 ppm of fluoride toothpaste, the fluoride release was significantly higher only for the alkasite restorative material compared to the fluoride-free toothpaste group (p < 0.017). When restorative material groups were recharged with 1450 ppm of fluoride toothpaste, the fluoride release was significantly higher in all restorative groups compared to the fluoride-free toothpaste group (p < 0.017).

• Analytical Science and Technology
• /
• v.28 no.6
• /
• pp.460-466
• /
• 2015

An isotope dilution liquid chromatography tandem mass spectrometry was developed as a primary method for the quantitative analysis of cholesterol in infant formula. Cholesterol-d₄ was used as an internal standard and spiked into the infant formula sample. In order to release cholesterol out of cholesteryl ester, which is cholesterol bound to fatty acids in infant formula, saponification was carried out. Saponification conditions were optimized with heating temperature, reaction time and the concentration of KOH. The optimum conditions were as follows; heating temperature was 70 ℃, reaction time was 180 min and the concentration of KOH was 0.8 mL of 8 M KOH for about 0.1 g infant formula sample. Extraction of cholesterol out of sample solution was carried out with hexane uisng liquid-liquid extraction. Chromatographic analysis was carried out using Phenomenex Kinetex C₁₈ column. Mobile phase was 0.1% acetic acid in methanol/water (v/v, 99/1) and flow rate was 0.3 mL/min. Cholesterol and cholesterol-d₄ were monitored at mass transfer m/z 369/259 and 373/263 respectively. Reproducibility of the method was evaluated to be 0.23% of the measurement result. The expanded uncertainty of the measurement result of cholesterol in infant formula was approximately 1.9% at a 95% confidence level. NIST standard reference material having certified values of cholesterol in infant formula, was analyzed in order to verify this method. The ID-LC/MS/MS results were well agreed with the certified values of NIST SRM within the uncertainty.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.9
• /
• pp.989-996
• /
• 2007

In this study, abiotic transformation of 1-naphthol(1-NP) via oxidative-coupling reaction and its reaction products were investigated in the presence of Mn oxides. The reaction products were characterized for their relative polarity using solvent extraction experiment and reverse-phase HPLC, and for structure using CCMS and LC/MS, and for absorption characteristics using UV-Vis spectrometry. The reaction products present in aqueous phase were more polar than parent naphthol and comprised of 1,4-naphthoquinon(1,4-NPQ) and oligomers such as dimers and trimers. Hydrophilic component present in water phase after solvent$(CH_2Cl_2)$ extractions was identified as naphthol polymerized products having molecular weight(m/z) ranging from 400 to 2,000, and showed similar UV-Vis. absorption characteristics to that of foil fulvic acid. Transformation of 1,4-NPQ, which is non-reactive to Mn oxide, to the polymerized products via cross-coupling reaction in the presence of 1-NP was also verified. In this experimental conditions(20.5 mg/L, 1-NP, 2.5 g/L $MnO_2$, pH 5), the transformation of 1-NP into the oligomers and polymerized products were about 83% of initial 1-NP concentrations, and more than 30% of the reaction products was estimated to be water insoluble fractions, not extracted by $H_2O$ methanol. Results from this study suggest that Mn oxide-mediated treatment of naphthol contaminated soils can achieve risk reduction through the formation of oligomers md polymer precipitation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.118-128
• /
• 2001

This study was performed to evaluate the toothbrush abrasion characteristics of seven commercially available light-cured cervical restorative materials one resin-modified glass-ionomer material(Fuji II LC) three polyacid-modified composites(Compoglass, Dyract, F2000), and three light-cured composites(Heliomolar, Palpique Estelite, UniFil F). All samples were stored in distilled water at $37^{\circ}C$ for 10 days. 2.0N of weight was loaded during the test and the abraded surfaces were examined with profilometer and SEM after 100,000 cycles. The results obtained were summarized as follows; 1. The highest hardness value of 79.7 was observed in the FT group and the lowest value of 20.0 was observed in the HM group. Results of Tukey test showed that an overall significant difference was indicated except the CG and DR groups(p<0.05). 2. The highest surface roughness was observed in the FL group and the lowest was observed in the UF group. Results of Tukey test showed the significant difference between the FL or FT and UF groups(p<0.05). 3. Statistically higher abrasion and surface roughness were observed for the dentifrice of paste type, Perio A+, than for that of gel paste type, Tom & Jerry. 4. The surface roughness values increased on the abraded surfaces because of the protrusion of filler particles due to selective removal of matrix resin.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.290-290
• /
• 2017

Rice (Oryza sativa L.) is one of the most consumed staple food crop which is energy source as carbohydrate and also is considered as the important antioxidant sources including various phenolic compounds. According to the increasing demand of healthy life, the concern to antioxidant also is increasing because of its health-promoting effect. Phenolic compounds are one of the plant secondary metabolites class, which shows various benefits to preventing or treating chronic diseases. In this study, we have measured the total phenol content from total 647 rice samples using the Floin-Ciocalteau method, and then were selected 30 rice genetic resources classified with high, middle, and low group on the basis of total phenol content. The average of the total phenol content of each group was high-group ($6892.9{\pm}488.5{\mu}g\;GAE/g$) > middle-group ($1428.1{\pm}76.0{\mu}g\;GAE/g$) > low-group ($97.6{\pm}11.4{\mu}g\;GAE/g$). The selected rice samples were analyzed with LC-MS/MS to find the composition and concentration of individual phenolic in rice grain. High-group and middle-group contained large amounts of protocatechuic acid and (+)-catechin whereas low-group showed limited amount. Among high-group samples, rice samples with black pericarp color (IT 174089, IT 220079, and IT 259958) had high content of peonidin-3-O-glucoside. Further, these black rice samples were special since polydatin, rarely found stilbenoid in rice grain, was detected. Overall, both the sum of phenolic acid and the sum of flavonoid were high-group > middle-group > low-group. Also, each group exhibited different phenolic compositions; high-group consisted of flavonoid more than phenolic acid, middle-group and low-group was comprised of phenolic acid rather than flavonoid, and non-pigmented rice was composed by fully phenolic acid. The total phenol content had positive relationships with the sum of phenolic compound (r = 0.64), the sum of flavonoid (r = 0.74) at the significance level of p < 0.0001. In addition, protocatechuic acid and quercetin showed positive correlation with above phenolic composition parameters; in order, r = 0.98, 0.65 for protocatechuic acid and r = 0.73, 0.78 for quercetin (p < 0.0001). In conclusion, the total phenol content assay showed the possibility of utilization as a phenolic composition indicator in rice grain. Also, this result was suggested study pigment on other material.

• Restorative Dentistry and Endodontics
• /
• v.19 no.2
• /
• pp.585-601
• /
• 1994

The purpose of this study was to evaluate the ability of several intracoronal base materials to prevent cervical leakage of a bleaching agent into the dentinal tubules and along the root canal. In this study, thirty-two anterior teeth were used. After lingual access was prepared in each tooth, tooth was instrumented with a step-back technique to a Nos. 40-50 using K-type files. All teeth were obturated with a lateral condensation technique. Excess gutta percha was removed with a warm instrument to the facial level of the CEJ. Teeth were divided into four groups : Teeth in control group were not filled with base material. Teeth in groups 1, 2, and 3 had 2mm of gutta percha removed with a warm instrument, then Dycal, Fuki II LC and Z-100 were filled with palstic instruments on the top of the gutta percha respectively. All teeth were bleached for 7 days, fresh bleach was added for another 7 days, then a 10 % methylene blue dye was placed inside the access preparation. They were stored at $37^{\circ}C$ and $100^{\circ}C$ humidity for 5 days. Each tooth was sectioned perpendicular to the long axis using a diamond disk. Initial cuts were made at the most coronal level of facial and lingual CEJ's, then another cuts continued appically in the levels of 0.5mm, 1.5mm, and 2.0mm respectively. The amount of dye leakage through the dentinal tubules was determined at each cut section. In addition, when the cut specimen was determined to be last penetration of any dye, this level was recorded as depth of apical leakage from the coronal terminus of the gutta percha, Dycal, Fuji II LC and Z-100. The acquired data were analyzed by Tukey's Multiple Range Test adn Cochran-Mantel-Haenszel Test to see if there was any statistically significant difference in dye penetration and linear apical leakage among the groups. The results were as follows : 1. Control group at levels of CEJ and 0.5mm, group 3 at level of 1.5mm, and group 2 AND 3 at level of 2.0mm showed the least dye penetration through the facial or lingual dentinal tubules, but there were no significant difference among three groups. 2. Group 2 at levels of CEJ and 0.5mm, group 3 at level of 1.5mm, and group 2 and 3 at level of 2.0mm showed the least dye penetration through the proximal dentinal tubules, but there were no significant difference among control group, group 2, and group 3. 3. Group 1 showed the greatest dye penetration through the facial or lingual and proximal dentinal tubules at all levels, and there were significant difference with other three groups. 4. Control group and group 1 showed 2mm apical dye leakage at facial or lingual and proximal aspects, group 2 showed 1.5mm, and group 3 showed 0.5mm.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.3
• /
• pp.225-234
• /
• 2022

The purpose of this study was to confirm the skin whitening and UV absorption effects of bioconverted Beta vulagaris (BBE) using Lactiplantibacillus plantarum SM4, and the effects were evaluated by measuring total polyphenol content (TPC), total flavonoid content (TFC), radical elimination activity (RSA), and tyrosinase activity inhibition (TAI). TPC and TFC of BBE were 25.0 mg GAE/g DM and 8.05 mg QE/g DM, which were 1.3 and 1.1 times higher than hot-water extract (HWE) respectively. RSA, an indicator of antioxidant activity, and TAI, an indicator of skin-whitening effect, were 36.8%, and 68.6%, respectively, 1.1 and 1.2 times higher than that of HWE. UVA and UVB absorption of BBE were 21.4 and 87.6%, which was 1.4 and 1.7 times higher than that of HWE respectively. When main substances of BBE were analyzed using LC-MS/MS, kaempferol and isorhamnetin, a type of polyphenols known to have high antioxidant and skin-whitening effects, were identified. As a results, BBE is expected to be used as a functional cosmetic material as it has excellent antioxidant, skin whitening, and UV absorption properties.

• Applied Chemistry for Engineering
• /
• v.33 no.5
• /
• pp.496-501
• /
• 2022

In this study, an anode material for lithium secondary batteries was manufactured using petroleum-based residual oil, which is a petroleum refining by-product. Among petroleum-based residual oils, pyrolysis fuel oil (PFO), fluidized catalyst cracking-decant oil (FCC-DO), and vacuum residue (VR) were used as carbon precursors. The physicochemical characteristics of petroleum-based residual oil were confirmed through Matrix-assisted laser desorption/ionization Time-of-Flight (MALDI-TOF) and elemental analysis (EA), and the structural characteristics of anode materials manufactured from residual oil were evaluated using X-ray crystallography (XRD) and Raman spectroscopic techniques. VR was found to contain a wide range of molecular weight distributions and large amounts of impurities compared to PFO and FCC-DO, and PFO and FCC-DO exhibited almost similar physicochemical characteristics. From the XRD analysis results, carbonized PFO and FCC-DO showed similar d₀₀₂ values. However, it was confirmed that FCC-DO had a more developed layered structure than PFO in Lc (Length of a and c axes in the crystal system) and La values. In addition, FCC-DO showed the best cycle characteristics in electrochemical characteristics evaluation. According to the physicochemical and electrochemical results of the petroleum-based residual oil, FCC-DO is a better carbon precursor for a lithium secondary battery than PFO and VR.