• Transactions on Electrical and Electronic Materials
• /
• v.9 no.3
• /
• pp.120-122
• /
• 2008

We have studied the tilt angle generation on the homeotropic polyimide (PI) surface using a low intensity ion beam source as a function of incident angle. An excellent LC alignment of nematic liquid crystal (NLC) on the PI surface with ion beam exposure for all incident angles was observed. The tilt angle of NLC on the homeotropic PI surface for all incident angles was from 90 to 88 degree was observed. Also the tilt angle of NLC on the homeotropic PI surface with ion beam exposure of 400 eV had a tendency to increase as ion beam energy incident angle become more instance from 45 degree. Finally, a good LC alignment thermal stability on the homeotropic PI surface with ion beam exposure can be achieved.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.2
• /
• pp.82-85
• /
• 2013

This paper introduces 6,13-bis(triisopropylsilylethynyl) pentacene (TIPS pentacene) doped liquid crystal (LC) alignment properties on a rubbed polyimide (PI) layer as a function of the doping concentration of TIPS pentacene. Pretilt angles, photomicrographs, and electro-optical properties of TIPS pentacene doped LCs were comparable to those of pure LCs. However, TIPS pentacene in a LC medium supported twisted nematic-liquid crystal displays (TN-LCDs) to improve electro-optical properties. The threshold voltages observed in the TN cells decreased as the TIPS pentacene concentration increased. In addition, suitable response times were observed in TN cells.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.2
• /
• pp.228-237
• /
• 2001

It is well known that glass-ionomer cement and compomer can release fluoride which can inhibit the progression of dental caries. The purposes of this study were to evaluate whether the fluoride from fluoride-containing filling materials can penetrate the dentin bonding adhesive and the dentin bonding adhesive can increase the bond strength of resin-modified glass ionomer. The amount of fluoride release from resin-modified glass ionomer and compomer was measured during 28 days of period and statistically analyzed by t-test. The bond strength of each material with/without dentin bonding adhesive was measured and also statistically analyzed by t-test. The distribution of fluoride from each material into the tooth was explored by electron probe microanalysis system(EPMA). The experimental teeth used were second primary molars about to exfoliate. The amount of fluoride release from each material was diminished by dentin bonding adhesive during 28 days(p<0.05) and the bond strength was not increased by dentin adhesive in resin-modified glass ionomer. The bond strength of group VI was not detectable. The distribution of fluoride from each material into teeth was according to dentino-enamel junction and dispersed into pulp from pulpal floor. The widest distribution was shown in resin-modified glass ionomer cement filled without the application of dentin bonding adhesive.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.9
• /
• pp.770-775
• /
• 2000

A new photo-polymer material of the copoly (PM4Ch-ChMA), copoly (poly (4-methacryloyloxy)chalcone-cholesteryl methacrylate) for homeotropic alignment was synthesized and the electro-optical (EO) performance for the photo-aligned vertical-aligned (VA)-LC display (LCD) was studied. Good thermal stabilities of synthesized copolymer were obtained by TGA(Thermogravimetric Analysis) measurement. Good voltage-transmittance (V-T) and response time characteristics for the photo-aligned VA-LCD with polarized UV exposure in oblique direction($\theta$$_{i}$=30$^{\circ}$) on a copolymer-1 (2%) surfaces for 1 min were observed. but, light leakage in the off-state was observed. Therefore, we achieved excellent V-T and response time characteristics for the photo-aligned VA-LCD with UV exposure on a copolymer-3 (30%) surfaces for 3 min.n.

• Korean Journal of Materials Research
• /
• v.14 no.1
• /
• pp.28-34
• /
• 2004

IN 738LC, the major material for gas-turbine for power generation, was heat treated at $750^{\circ}C$, $850^{\circ}C$, $950^{\circ}C$ for 1000, 2000, and 4000 hrs and the microstructural evolution and mechanical properties were examined using optical microscope, XRD, SEM/EDS. The results showed ${\gamma}$', the main strengthening elements in this alloy, was about 300 nm in size and was about 56% by area fraction in as-cast samples. The area fraction of ${\gamma}$' peaked at 2000 hours at $750^{\circ}C$. The average diameter of the ${\gamma}$' which was about 300 nm at ascast specimen increased to about 1 $\mu\textrm{m}$ after heat treatment at $950^{\circ}C$ for 4000 hrs. Carbides were formed at dendrite, cell or grain boundaries which was ascribed to the segregation caused by solute redistribution during solidification. It was found that MC type carbides formed at low temperature, whereas carbides of $M_{23}$ /$C_{ 6}$/ type formed at higher temperature or at longer degradation. The hardness and impact energy decreased as the heat treatment temperature or time of retention increased, which was inaccrodance with the area fraction of ${\gamma}$'.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.2
• /
• pp.128-133
• /
• 2015

BACKGROUND: Plant extracts have been used as environment friendly agricultural materials for organic farming in South Korea. However safety evaluation on the plant extracts was not properly tested. The aim of this study was to evaluate safety of the extracts from Melia azedarach, Nerium indicum and Coptis chinensis on cultivating rice. METHODS AND RESULTS: Pant extarcts 300-fold diluted were treated on rice, and residues of M. azedarach, N. indicum and C. chinensis were determined. The analytes from the rice samples were detected by liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS). The method was validated, and good linearities ($r^2=0.995-0.998$), specificity, and recoveries were obtained. Limits of detection were 0.01 mg/kg for all of the target compounds. Recoveries were 79.3-118.3% at 0.1 mg/kg and 75.2-111.5% at 0.5 mg/kg. The residue levels were below 0.030 mg/kg for azadirachtin, 0.320 mg/kg for oleandrin and 1.460 mg/kg for berberine. CONCLUSION(S): The extracts of M. azedarach, N. indicum and C. chinensis contained azadirachtin, oleandrin and berberine as an active ingredient, respectively. The residue of three active ingredients dramatically decreased after treatment in all fruits, stems and roots of rice.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.4
• /
• pp.516-521
• /
• 2014

The purpose of this study was to examine the skin regeneration ability of Lespedeza cuneata extract (LC) as well as verify its wound healing effects on an open wound in rats. Rats were divided into six groups (NO, saline treated group; CO, 1% carboxy methyl cellulose (CMC) treated group; PC, fucidin treated group; LCL, 1% LC treated group; LCM, 3% LC treated group; LCH, 5% LC treated group), and the experimental material was applied for 5 weeks. Elastase inhibition rate of the LCM group was 2.7% lower than that of butylated hydroxy anisole (BHA), which is an antioxidant. Futher, the collagenase inhibition rate of the LCM showed 7% higher activity than that of BHA. The left wound areas in the LCL group, LCM group, and LCH group after the 21st day were noticeably reduced in wound area by 54.2%, 53.5%, and 48.7%, respectively, compared to the CO group. This suggests that Lespedeza cuneata extract has healing effects on surgical wounds by promoting regeneration of skin epithelial tissue and synthesis of collagen.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.6
• /
• pp.265-267
• /
• 2007

The liquid crystal(LC) aligning capabilities of a nematic liquid crystal(NLC) on a homeotropic polyimide(PI) surface using a new ion-beam method were studied. Exposure ion-beam of $45^{\circ}$ incidence angle shows a good LC alignment of the NLC on the homeotropic PI surface. Also, on the homeotropic PI surface, the tilt angle of the NLC by exposure ion-beam of $45^{\circ}$ incidence angle had a tendency to decrease as increased ion-beam energy density. And, on the homeotropic PI surface, the alignment character of the NLC with respect to ion-beam energy was good at 1500 eV. And we achieved satisfactory result for EO character.

• Korean Journal of Materials Research
• /
• v.16 no.9
• /
• pp.557-563
• /
• 2006

The electrolytic reduction of spent oxide fuel involves the liberation of oxygen in a molten LiCl electrolyte, which results in a chemically aggressive environment that is too corrosive for typical structural materials. So, it is essential to choose the optimum material for the process equipment handling molten salt. In this study, corrosion behavior of Inconel 713LC, MA 754, X-750 and 718 in the molten salt $LiCl-Li_2O$ under an oxidizing atmosphere was investigated at $650^{\circ}C$ for $72{\sim}216$ hours. Inconel 713LC alloy showed the highest corrosion resistance among the examined alloys. Corrosion products of Inconel 713LC were $Cr_2O_3,\;NiCr_2O_4$ and NiO, and those of Inconel MA 754 were $Cr_2O_3\;and\;Li_2Ni_8O_{10}$ while $Cr_2O_3,\;NiFe_2O_4\;and\;CrNbO_4$ were produced from Inconel 718. Also, corrosion products of Inconel X-750 were found to be $Cr_2O_3,\;NiFe_2O_4\;and\;(Cr,Nb,Ti)O_2$. Inconel 713LC showed local corrosion behavior and Inconel MA 754, 718, X-750 showed uniform corrosion behavior.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.620-625
• /
• 2018

Liquid detergent based on sodium lauryl ethoxy sulfate (SLES) as main ingredient sometimes met gelling film on the surface when it is opened in the air. It was assumed because of the change of phase diagram of micelle by concentration change of surfactant, major ingredient of detergent when the water of detergent is evaporated. SLES showed strong hexagonal liquid crystal (LC) in 30~60 wt%, and lamellar LC over 60 wt%. In this research surface gelling formation of liquid detergent which is based on SLES as main ingredient was because of water evaporation. As water of detergent was evaporated, concentration of surfactant became higher. It was checked that surface gelling was LC of mixed surfactant system. Conclusionally we applied alpha olefin sulfonate (AOS) having good solubility, Sodium secondary alkane sulfonate (SAS) preventing hexagonal LC and hydrotrope sodium xylene sulfonate (SXS) and PEG1500 in order to prevent gelling film in SLES based liquid detergent. Like this, improved formula 4 and 5 can prevent the formation of gelling film on the surface of liquid detergent when it is opened in the air.