• 한국항만경제학회지
• /
• 제32권3호
• /
• pp.95-108
• /
• 2016

최근 중국은 일대일로 국가전략을 표방하고 이를 세부적으로 실행함과 동시에 세부계획 등을 지속적으로 수정보완 중에 있다. 그러나 우리나라를 포함한 한반도는 여기에 전혀 포함되지 못한 채로 우리나라 주도의 독자 국제물류정책들을 남발하고 있다. 지금은 유명무실화된 한중열차페리시스템이 다시 제기되는 등 동북아 국제복합운송시스템에 관한 움직임은 마련되어야 하고 유지되어야 한다. 본 연구에서 그 실행계획으로써 K-LB(Korea LandBridge)를 소개하고 이에 관한 타당성조사를 실시하였다. K-LB는 새만금신항을 중심으로 하는 대중국 열차페리시스템인 left-wing과 영일만항을 중심으로 하는 대러시아 열차페리시스템인 light-wing으로 하는 양 날개를 우리나라 기존 철도시스템으로 연계하는 시스템을 말한다. 본 연구는 K-LB가 현 조건과 상황에서 실효성 있는 국제물류시스템이라 확신하며 이의 도입에 관한 타당성을 제시하였다. 보다 엄밀히 말하면 도입 타당성을 확보하기에 앞서 계량화가 가능한 운송비용을 최소화 시키는 목적함수하의 선형계획모형을 통하여 K-LB의 효율성이 확보되는 운송비에서의 가용범위와 조건을 제시하였다. 연구결과는 해상운송보다 열차페리가 34.5% 정도 저렴한 비용 수준을 확보할 수 있다면 열차페리에 의한 K-LB에 경쟁력이 확보될 수 있음을 밝히고 있다. 이는 열차페리가 컨테이너전용선보다 신속한 통관시간과 절차뿐만 아니라 양하역비가 절감되는 유연한 양하역작업을 감안한다면 그 임계수준이 크지 않으며 동북아 국제물류시스템에서 충분히 경쟁력을 확보할 수 있는 시스템임을 의미한다.

• Nuclear Engineering and Technology
• /
• 제48권5호
• /
• pp.1140-1153
• /
• 2016

Since the inception of nuclear power as a commercial energy source, safety has been recognized as a prime consideration in the design, construction, operation, maintenance, and decommissioning of nuclear power plants. The release of radioactivity to the environment requires the failure of multiple safety systems and the breach of three physical barriers: fuel cladding, the reactor cooling system, and containment. In this study, nuclear reactor containment pressurization has been modeled in a large break-loss of coolant accident (LB-LOCA) by programming single-cell and multicell models in MATLAB. First, containment has been considered as a control volume (single-cell model). In addition, spray operation has been added to this model. In the second step, the single-cell model has been developed into a multicell model to consider the effects of the nodalization and spatial location of cells in the containment pressurization in comparison with the single-cell model. In the third step, the accident has been simulated using the CONTAIN 2.0 code. Finally, Bushehr nuclear power plant (BNPP) containment has been considered as a case study. The results of BNPP containment pressurization due to LB-LOCA have been compared between models, final safety analysis report, and CONTAIN code's results.

• 생명과학회지
• /
• 제25권7호
• /
• pp.810-818
• /
• 2015

유산균이 활성화된 비만세포에서 발현하는 IL-4와 IL-13을 조절할 수 있는지를 분석하였고, GATA-1, GATA-2, NF-AT1, NF-AT2, NF-κB p65 전사인자의 활성을 억제하는지를 실험적으로 규명하였다. 이전 연구에서 T cell에서 CD4+/CD25+/foxp3+ 증가를 실험하여 항아토피 기능성이 있는 유산균을 탐색하였고, Staphylococcus aureus에 대한 항균력을 증가시키는 유산균의 이중배양법을 확인하였다. 여기서는 RBL-2H3 비만세포를 이용하여 이 배양법으로 배양한 유산균이 아토피 피부염의 원인이 되는 allergy 염증반응에서 얼마나 억제능을 갖는지 알아보았다. 그 결과 Lc. lactis culture with medium containing Lb. plantarum supernatants > Lc. lactis > Lc. lactis culture broth with medium containing Lb. plantarum culture broth > Lb. plantarum의 순으로 나타났다. 이 cell 수준(level of mast cells)에서의 순서는 이전 연구의 level of microorganisms (anti-S. aureus)에서의 아토피 유발인자 억제능 순서와 같다. 따라서 세포수준에서도 Lb. plantarum 배양상층액을 첨가한 배지에 Lc. lactis 배양한 경우가 활성화된 비만세포의 allergy 반응으로의 분화 및 활성을 가장 잘 억제하고 관련 유전자 발현을 선택적으로 조절하는 anti-allergy 효과를 나타낸다고 사료된다.

• 대한기계학회논문집B
• /
• 제35권2호
• /
• pp.169-178
• /
• 2011

격자볼츠만 방법(LBM)을 이용하여 난류 경계층에서의 오염물질 확산에 대하여 수치계산을 수행 하였다. 난류 경계층 내의 유동을 모사하기 위하여 격자볼츠만 방법에 Smagorinsky 아격자 모델을 적용한 LB-SGS 모델을 사용하였으며, 오염물질의 확산을 모사하기 위하여 Passive-scalar 방법을 적용하였다. LB-SGS 모델의 신뢰성 검증을 위하여 Fackrell & Robins(1982)과 Raupach & Legg(1983)의 실험 조건과 동일한 조건하에서 수치계산을 수행하였고, 수치계산으로 얻어진 농도 분포를 실험값과 비교하였다. 이 결과로부터 LB-SGS 모델이 난류 경계층 내에서의 오염물질의 농도분포를 예측하는데 적합한 모델임을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.384-385
• /
• 2005

Monolayers of lipids on a water surface have attracted much interest as models of biological membranes, but also as precursors of multilayer systems promising many technical applications. Until now, many methodologies have been developed in order to gain a better understanding of the relationship between the structure and function of the monolayers. Maxwell displacement current (MDC) measurement has been employed to study the dielectric property of Langmuir-films. MDC flowing across monolayers is analyzed using a rod-like molecular model. It is revealed that the dielectric relaxation time $\tau$ of mono layers in the isotropic polar orientational phase is determined using a liner relationship between the monolayer compression speed a and the molecular area $A_m$. Compression speed a was about 30, 40, 50mm/min. also, LB layers of Arachidic acid deposited by LB method were deposited onto slide glass as Y-type film. The structure of manufactured device is Au/Arachidic acid/Al, the number of accumulated layers are 9 ~ 21 and we then examined of the Metal-Insulator-Metal(MIM) device by means of I-V.

• Nuclear Engineering and Technology
• /
• 제35권2호
• /
• pp.91-107
• /
• 2003

Since DBA(Design Basis Accidents) has been studied rather separately from SA(Severe Accidents) in the conventional nuclear reactor safety analysis, the thermal hydraulics during transition between DBA and SA has not been identified so much as each accident itself. Thus, in this study, the thermal hydraulic behavior from DBA to the commencement of SA has been experimentally and analytically investigated for the long-term cooling phase of LB-LOCA(Large-Break Loss-of-Coolant Accident). Experiments were conducted for both cases of the loop seal open and closed in an integral test loop, named as SNUF (Seoul National University Facility), which was scaled down to l/6.4 in length and 1/178 in area of the APR1400 (Advanced Power Reactor 1400MWe). The core mixture level was a main measured value since it took major role in the fuel heat-up rate, the location of fuel melting initiation and the channel blockage by melting material during SA. Experimental results were compared to MAAP4.03 to assess its model of calculating the core mixture level. MAAP4.03 overestimates the core two- phase mixture level because sweep-out and spill-over and the measures to simulate the status of loop seal are not included, which is against the conservatism. Thus, it is recommended that MAAP4.03 should be improved to simulate the thermal hydraulic phenomena, such as sweep-out, spill-over and the status of loop seal.

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1508-1515
• /
• 2022

In the present study, the cavity module of the MELCOR code is used for the simulation of molten corium concrete interaction (MCCI) during the late phase of postulated large break loss of coolant (LB-LOCA) accident in the APR1400 reactor design. Using the molten corium composition data from previous MELCOR Simulation of APR1400 under LB-LOCA accident, the ex-vessel phases of the accident sequences with long-term MCCI are recalculated with stand-alone cavity package of the MELCOR code to investigate the impact of water ingression and melt eruption models which were hitherto absent in MELCOR code. Significant changes in the MCCI behaviors in terms of the heat transfer rates, amount of gases released, and maximum cavity ablation depths are observed and reported in this study. Most especially, the incorporation of these models in the new release of MELCOR code has led to the reduction of the maximum ablation depth in radial and axial directions by ~38% and ~32%, respectively. These impacts are substantial enough to change the conclusions earlier reached by researchers who had used the older versions of the MELCOR code for their studies. and it could also impact the estimated cost of the severe accident mitigation system in the APR1400 reactor.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집
• /
• pp.27-32
• /
• 2004

Maxwell displacement current (MDC) measurement has been employed to study the dielectric property of Langmuir-films. MDC flowing across monolayers is analyzed using a rod-like molecular model. A method for determining the dielectric relaxation time ${\tau}$ of floating 'monolayers on the water surface is presented. MDC floing across monolayers is analyzed using a rod-like molecular model. It is revealed that the dielectric relaxation time ${\tau}$ of monolayers in the isotropic polar orientational phase is determined using a liner relationship between the monolayer compression speed a and the molecular area Am. Compression speed a was about 30,40,50mm/min. LB layers of Arachidic acid deposited by LB method were deposited onto slide glass as Y-type film.The physicochemical properties of the LB films were examined by UV absorption spectrum, SEM and AFM. The structure of manufactured device is Au/Arachidic acid/Al, the number of accumulated layers are 3~9. Also, we then examined of the MIM device by means of I-V characteristic of the device is measured from -3 to +3[V]. The insulation property of a thin film is better as the distance between electrodes is larger.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.1279-1282
• /
• 2005

Maxwell displacement current (MDC) measurement has been employed to study the dielectric property of Langmuir-films. MDC flowing across monolayers is analyzed using a rod-like molecular model. LB layers of Arachidic acid deposited by LB method were deposited onto slide glass as Y-type film. The structure of manufactured device is Au/Arachidic acid/Al, the number of accumulated layers are $3{\sim}9$. Also, we then examined of the MIM device by means of I-V. The I-V characteristic of the device is measured from -3 to +3[V].

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.123-125
• /
• 1996

The orientation effect of galactose ligand on hepatocyte attachment was investigated. Poly(N-p-vinyl benzyl-o-${\beta}$-D-galactopyranosyl-D-gluconamide) (PVLA), a ${\beta}$-galactose-carrying styrene homo-polymer, was used as a model ligand for the asialoglycoprotein receptors on hepatocytes. PYVA was transferred onto the poly(${\gamma}$-benzyl L-glutamate)(PBLG) or PBLG/ poly(ethylene glycol)(PEG)/PBLG Langmuir-Blodgett (LB) films as the monolayer level. The dichroic fluorescence values of confocal microscope indicated that the PVLA transferred onto the LB films was located with a preferential orientation of its molecular axes with regard to the direction of the a-helix of polypeptide. Hepatocyte recognized well-oriented galactose moieties of the surface of PVLA through asialoglycoprotein receptors.