• Proceedings of the KIEE Conference
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1714-1716
• /
• 2000

We fabricated the optical system of merocyanine dye using Langmuir-Blodgett(LB) technique because quite uniform orientation could be obtained, which is one of the most important factors to affect to its optical characteristics. The resonance frequency and other electrical parameters at the parallel resonance state were measured using the impedance analyser(HP 4294 A). Also the morphological changes of dye molecules after UV irradiation were observed using AFM. The parallel resonance frequency and resistance by electrical equivalent circuit were decreased with the UV irradiation and these aspects are different from general mass adsorption process. Therefore the structural changes of dye molecules are being considered, that is, the aggregated molecules become dissociated. It indicates that the shifts of the resonance frequency and the others occurred without mass absorption.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.287-290
• /
• 2000

We give pressure stimulation into organic thin films and then manufacture a device under the accumulation condition that the state surface pressure is 20[mN/m]. LB layers of Arac. acid deposited by LB method were deposited onto y-type silicon wafer as x, y, z-type film. In processing of a device manufacture, we can see the process is good from the change of a surface pressure for organic thin films and transfer ratio of area per molecule. The structure of manufactured device is Au/arachidic acid/Al, the number of accumulated layers. Also, we then examined of the MIM device by means of I-V. The I-V characteristic of the device is measured from 0 to +2[V].

• Journal of the Korean Applied Science and Technology
• /
• 제18권1호
• /
• pp.49-54
• /
• 2001

Ultra-thin films of organic charge transfer complex were prepared on a hydrophilic substrate by Langmuir-Blodgett(LB) technique. In this study, the photoelectric properties of a LB film consisting of (N-docosyl quinolinium)-TCNQ(1:2) complex was investigated. The visible light(${\lambda}$ : 700 nm) of xenon lamp was illuminated on the LB films and light absorptivity and photoconductivity were observed. The photocurrent increased linearly and was saturated at the light intensity of 23 ${\mu}W/cm^{2}$.

• Journal of the Korean Applied Science and Technology
• /
• 제14권3호
• /
• pp.79-87
• /
• 1997

In this study, MEH-PPV was synthesized and MEH-PPV and its mixtures with PMMA were deposited on substrates with Langmuir-Blodgett(LB) technique and their photoluminescent char acteristics were investigated using UV-Vis absorption spectroscopy, and photoluminescence(PL) measurements. The surface morphology of the LB films of MEH-PPV and its mixture with PMMA were investigated using Atomic Force Microscopy(AFM). Electroluminescent devices using LB films were fabricated with Al and ITO as a top and bottom electrode, respectively, and their I-V characteristics were investigated.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.417-428
• /
• 2018

In this study, we fabricated hierarchically self-assembled thin films composed of graphene oxide (GO) sheets and gold nanoparticles (Au NPs) using the Langmuir-Blodgett (LB) and Langmuir-Schaefer (LS) techniques and investigated their gas-sensing performance. First, a thermally oxidized silicon wafer ($Si/SiO_2$) was hydrophobized by depositing the LB films of cadmium arachidate. Thin films of ligand-capped Au NPs and GO sheets of the appropriate size were then sequentially transferred onto the hydrophobic silicon wafer using the LB and the LS techniques, respectively. Several different films were prepared by varying the ligand type, film composition, and surface pressure of the spread monolayer at the air/water interface. Their structures were observed by scanning electron microscopy (SEM) and atomic force microscopy (AFM), and their gas-sensing performance for $NH_3$ and $CO_2$ was assessed. The thin films of dodecanethiol-capped Au NPs and medium-sized GO sheets had a better hierarchical structure with higher uniformity and exhibited better gas-sensing performance.

• Journal of the Korean Applied Science and Technology
• /
• 제16권4호
• /
• pp.273-279
• /
• 1999

In order to study a reversible photoisomerization of disperse red l(DR 1) attached on natural polymers, cellulose acetate containing DR l(DR 1/CA adduct) was prepared, and the changes of UV/VIS spectra of its solution(benzene, DMAc). thick film, and LB film were investigated by alternate irradiation with two different wave length lights. DR 1/CA adduct was prepared through tosylation of partially hydrolyzed cellulose acetate followed by reaction with DR 1 at $100^{\circ}C$ in pyridine. From the UV/VIS spectra of DR 1/CA adduct dissolved in DMAc solvent including phosphoglyceride before and after irradiation at 360nm and 45Onm, we found out the changes of UV/VIS spectra were reversible. In addition, the change of UV/VIS spectra of this adduct solution was strongly depended on the sorts of solvents and temperature. As the temperature was increased, UV/VIS spectra of this adduct solution in DMF showed blue shift. These results provided this solution could be applied to a temperature sensor. In the thick film case, we also obtained similar results with solution case. LB monolayer and trilayer from DR 1/CA adduct was obtained by scattering the solution including phosphoglyceride on water surface at the surface pressure of 8mN/m. After irradiation on that LB monolayer and trilayer, the reversible photoisomerization was also detected. From these results we concluded DR 1/CA adduct was suitable for the application to data storage and optical switch, etc.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.220-223
• /
• 1995

Stable polyion-complexed polymeric monolayrers were prepared by spreading perfluoroalkyl monomaleatd copolymers. C$_2$F$\_$8/MA-VE$_2$ and C$_2$F$\_$8/Mv-VE$_3$ on aqueous poly(allylamine) subphase. The monolayer properties have been studied by the surface pressure-area($\pi$-A) isotherms. The C$_2$F$\_$8/MA-VE$_3$containing longer oligoethyleneglycol pendant showed more expaned monolayer phase than the C$_2$F$\_$8/MA-VE$_2$ The polyion-complexed monolayers were transferable on various substrates, and the resulting Langmuir-Blodgett(LB) films were characterized b ET-IR spectroscopy and scanning electron microscopy(SEM) Two-dimensional crosslinking to from a polymer network was achieved by amide formation through heat treatment under vacuum with concurrent removel of perfluoroalkyl tails. SEM observation of this film ona porous membrane filter showed that the four layer film was sufficiently stable to cover the filter pore size of 0.1$\mu\textrm{m}$. The C$_2$F$\_$8/MA-VE$_3$revealed better covering capability than the C$_2$F$\_$8/MA-VE$_2$Immersion of this film in water or in benzend did not cause any change in its appearance and in FT-IR spectra.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2006년도 영호남 합동 학술대회 및 춘계학술대회 논문집 센서 박막 기술교육
• /
• pp.20-22
• /
• 2006

Monolayers of lipids on a water surface have attracted much interest as models of biological membranes, but also as precursors of multilayer systems promising many technical applications. Until now, many methodologies have been developed in order to gain a better understanding of the relationship between the structure and function of the monolayers. Maxwell displacement current (MDC) measurement has been employed to study the dielectric property of Langmuir-films. MDC flowing across monolayers is analyzed using a rod-like molecular model. A linear relationship between the monolayer compression speed and the molecular area Am. Compression speed was about 30, 40, 50mm/min. Langmuir-Blodgett(LB)layers of Arachidic acid deposited by LB method were deposited onto slide glass as Y-type film. The structure of manufactured device is Au/Arachidic acid/Al, the number of accumulated layers are 9~21. Also, we then examined of the Metal-Insulator-Metal(MIM) device by means of I-V. The I-V characteristics of the device are measured from -3 to +3[V]. The insulation property of a thin film is better as the distance between electrodes is larger.

• Bulletin of the Korean Chemical Society
• /
• 제23권4호
• /
• pp.575-579
• /
• 2002

Two-dimensionally cross-linked ultrathin films of poly(maleic acid-alt-methyl vinyl ether) (MA-MVE) and poly(allylamine) (PAA) were produced by using sodium dioctadecyl sulfate (2C18S) as the monolayer template for Langmuir-Blodgett (LB) depositio n. The template molecules were subsequently removed by thermal treatment followed by extraction. The polyion-complexed monolayers of three components, i.e., template 2C18S, co-spread PAA, and subphase MA-MVE, were formed at the air-water interface. Their monolayer properties were studied by the surface pressure-area isotherm. The monolayers were transferred on solid substrates as Y type. The polyion-complexed LB films and the resulting network films were characterized by FT-IR spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). The cross-linking to form a polymer network was achieved by amide or imide formation through heat treatment under a vacuum. SEM observation of the film on a porous fluorocarbon membrane filter (pore diameter 0.1 ㎛) showed covering of the pores by four layers in the polyion complex state. Extraction by chloroform followed by heat treatment produced hole defects in the film.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1497-1499
• /
• 2000

We give pressure stimulation into organic thin films and then manufacture a device under the accumulation condition that the state surface pressure is 30 [mN/m]. LB layers of Arac. acid deposited by LB method were deposited onto y-type silicon wafer as y-type film. In processing of a device manufacture. we can see the process is good from the change of a surface pressure for organic thin films and transfer ratio of area per molecule. The structure of manufactured device is Au/arachidic acid/Al. the number of accumulated layers are 9$\sim$21. Also. we then examined of the MIM device by means of I-V. The I-V characteristic of the device is measured from -3 to +3[V]. The insulation property of a thin film is better as the distance between electrodes is larger.