• 제목/요약/키워드: LB Film

검색결과 299건 처리시간 0.024초

Octa(2-ethylhexyloxy)copper-phthalocyanine LB막의 $NO_2$ 가스 탐지 특성에 관한연구 (A study on the $NO_2$ Gas Detection Characteristics of Octa(2-ethylhexyloxy)copper-phthalocyanine LB Films)

  • 임준석;김영관;김정수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1996년도 하계학술대회 논문집 C
    • /
    • pp.1716-1718
    • /
    • 1996
  • It is well known that the metallophthalocyanine (MPcs) are sensitive to toxic gaseous molecules such as $NO_2$ and also chemically and thermally stable. Therefore, lots of MPcs are studied for the potential chemical sensor for $NO_2$ gas using quartz crystal microbalance(QCM) or electrical conductivity. In this study, thin films of octa(2-ethylhexyloxy) copper-phthalocyanine were prepared by Langmuir-Blodgett method and characterized by using UV-VIS spectrascopy and ellipsometry. Transfer condition, film characterization, and preliminary results of current-voltage(I-V) characteristics of these films exposed to $NO_2$ gas as a function of film thickness will be discussed.

  • PDF

유기전하 이동착물 Langmuir-Blodgett막의 누적조건 및 누적확인에 관한 연구 (Deposition condition and Confirmation of Organic Charge Transfer complex Langmuir-Blodgett Film)

  • 정순욱
    • 한국응용과학기술학회지
    • /
    • 제14권1호
    • /
    • pp.89-93
    • /
    • 1997
  • In this research, ultra-thin films of organic charge transfer complex were deposited on to ordinary microscope slide-glass subtrates with a Langmuir-Blodgett technique. ${\pi}$-A isotherm characteristics of these complex were studied in order to find optimum conditions of deposition by varying temperature of subphase, compression speed, and spreading amount. Transfer ratio of these films were studied during the process of deposition. The UV-visible absorbance spectra of LB films were measured to find state of deposition by varing layer number. The observed optimum conditions of surface, pressure, spreading amount, and dipping speed for depositing LB films(Y-type) were 38m/Nm, $150{\mu}l$ and 5mm/min, respectively. Since the tansfer ratio is close to 100%, the monolayer on the subphase seems to be well transferred to the solid substrate. The thickness of the film was well-controlled as the UV-vis absorbance of films were changed linear according to the number of layers.

Octa(2-ethylhexyloxy)copper-phnthalocyanine LB막의 NO$_2$ 가스 탐지 특성에 관한 연구 (A study on the NO$_2$ Gas Detection Characteristics of Octa(2-ethylhexyloxy)copper-phthalocyanine LB films)

  • 임준석;김영관;김정수
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1996년도 춘계학술대회 논문집
    • /
    • pp.162-165
    • /
    • 1996
  • It is well shown that the metallophthalocyanine (MPcs) are sensitive to tonic gaseous molecules such as NO$_2$ and also chemically and thermally stable. Therefore, lots of MPcs are studied for the potential chemical sensor for NO$_2$ gas using quartz crystal microbalance(QCM) or electrical conductivity. In this study, thin films of octa(2-ethylhexyloxy) copper-phthalocyaninc ware prepared by Langmuir-Blodgett method and characterized by using UV-VIS spectrascopy and cllipsometry. Transfer condition, film characterization, and preliminary results of current-voltage(I-V) characteristics of these films exposed to NO$_2$ gas as a function of film thickness will be discusscd.

  • PDF

Azobenzene 유도체의 LB막 누적을 위한 기초 연구 (A Study for the LB Film Deposition of Azobenaene Derivative)

  • 이창근;최강훈;신동명;강도열
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1994년도 하계학술대회 논문집 C
    • /
    • pp.1376-1378
    • /
    • 1994
  • Azobenzene derivative is so stiff that monolayer cannot be formed on the subphase. To form a monolayer on the subphase, azobenzene derivative was mixed arachidic acid. It didn't form a monolayer, either. The mixture of azobenzene derivative and L-${\alpha}$-phosphatidylcholine generated a monolayer on the wafer subphase. Thickness of LB film layered at 30 mN/m was about $70{\AA}$. The polarized UV-visible absorption spectra of the mixture exhibited a dichroic ratio of azobenzene derivative and L-${\alpha}$-phosphatidylcholine.

  • PDF

LB법에 의한 Copper-tetra-tert-butylphthalocyanine (CuTBP)의 막 제작과 NO$_2$가스 탐지 특성에 관한 연구 (The NO$_2$Gas Detection Characteristics of Langmuir-Blodegett Films layered with Copper-tetra-tert-butylphthalocyanine(CuTBP))

  • 김형석;유병호;조형근;이창희;김정수
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1994년도 춘계학술대회 논문집
    • /
    • pp.79-82
    • /
    • 1994
  • We have manufacture Copper-tetra-tert-butylphalocyanine (CuTBP)Langmuir-Blodgett(LB) films, which is known be sensitive to NO$_2$ gab. A response of these films to the NO$_2$ gab was studied. A surface pleasure of 25mN/m was obtained as a proper one for a film deposition. A deposited film status was identified with Uv/visible absorption spectra, ellipsometry measurements, and current-voltage(I-Y) characteristics. The NO$_2$ gas response experiments under 200ppm conducentration show that there are increment of electrical conductivity by 12 times, 5 seconds of response time, and 5 seconds of response time, and 90 seconds of recovery time.

  • PDF

Ultrathin Polymer Networks of Itaconic Acid Copolymers and Poly(allkylamine) by the ;angmuir-Blodgett Technique

  • 최기선;이범종;장상목;권영수
    • Bulletin of the Korean Chemical Society
    • /
    • 제16권6호
    • /
    • pp.493-498
    • /
    • 1995
  • Ultrathin networks of itaconic acid copolymers and poly(allylamine) were produced by a Langmuir-Blodgett (LB) technique employing a double-chain amine as a monolayer template which was subsequently removed by extraction after thermal crosslinking. Itaconic acid copolymers used were copoly (itaconic acid-ethyl vinyl ether) and copoly (itaconic acid-n-butyl vinyl ether). The polyion-complexed monolayers of three components consisting of template amine, itaconic acid copolymer and poly (allylamine) were formed at the air-water interface. The Langmuir film properties have been studied by the surface pressure-area isotherm and fluorescence microscopy. The monolayers were transferred on solid substrates and were characterized by FT-IR spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy (SEM). Two-dimensional polymer networks were formed through imide or amide linkages by heat treatment under vacuum. The heat-treated films were extracted with chloroform after immersion in aq. sodium chloride to remove the template amines. SEM observation of a LB film on a porous fluorocarbon membrane filter with pore diameter of 0.1 μm showed covering of the pores by six layers in the polyion complex state.

Metal Ion-Containing Langmuir-Blodgett Films of a Monooctadecyl Itaconate Copolymer

  • 손종현;최기선;이범종;Kazue Kurihara
    • Bulletin of the Korean Chemical Society
    • /
    • 제16권4호
    • /
    • pp.316-320
    • /
    • 1995
  • The incorporation of metal ion into the Langmuir-Blodgett (LB) film of an itaconate copolymer was investigated. The polymer was prepared via radical copolymerization of monooctadecyl itaconate with triethyleneglycol methyl vinyl ether. The metal ions employed were Na+, Cs+, Mg2+, Fe2+, Al3+, and Fe3+. The surface pressure-area isotherms indicated that all the monolayers studied on subphases with metal ions showed more expanded areas than that observed on pure water. The monolayers showed an irreversible collapse behavior. The collapse pressure of the monolayers was low on subphases containing trivalent metal ions. From the FT-IR spectra by reflection and transmission modes, the formation of carboxylate salts and the uprisen orientation of the pendant against substrate surface in the polymer LB film were determined. It was estimated by XPS measurement that ca. 13.1 repeat units of the polymer contain one Na+ ion, while one Mg2+ ion corresponds to 5.9 carboxyls.

Mono- and Multi-layer Langmuir-Blodgett Films of Maleimide Polymers Possessing Nonlinear Optical-Active Side Chains

  • Yoon Kuk Ro;Lee Hoosung;Rhee Bum Ku;Jung Changsoo
    • Macromolecular Research
    • /
    • 제12권6호
    • /
    • pp.581-585
    • /
    • 2004
  • A copolymer P[OSA-MI] was synthesized by copolymerization of its corresponding monomers, N-phenyl maleimide (MI) and 2-octen-l-ylsuccinic anhydride (OSA). The polymer (poly[2-[1-(2,5-dioxo-l-phenylpyrroli­din-3-ylmethyl)heptyl]-succinic acid 4-(2-$\{$ethyl-[4-(4-nitrophen-ylazo)phenyl]amino$\}$ethyl)ester]) P[DR1MA-MI] was obtained from the reaction of P[OSA-MI] with 2-[4-(4-nitrophenylazo)-N-ethylphenylamino] ethanol (DR1). A stable monolayer of P[DRIMA-MI] was formed by spreading the solution of the polymer in chloroform. In Y-type Langmuir-Blodgett (LB) films prepared using this Langmuir-Blodgett method, the second harmonic waves generated from adjacent mono layers canceled each other out. In X-and Z-type LB films, the second harmonic intensity increased upon increasing the number of monolayers, but this increase was somewhat smaller than predicted by the square law. This phenomenon is due to defects or imperfect alignment of the dipoles in the LB film. The generation of second harmonic waves from Y-type LB films having an even number of mono layers supports this argument. The degree of imperfection seemed to increase as the number of layers increased. The second-order nonlinear optical properties of spin-cast films of these polymers were also measured. The largest second harmonic coefficient of the poled P[DRIMA-MI] film coated on a glass plate was 19 pm/V.

기능성 유기 초박막을 이용한 $NO_2$ 가스센서 개발을 위한 기초 연구 (Basic Studies for the Development of the $NO_2$ Gas Sensor Using Functional Organic Ultrathin Film)

  • 손병청;임병오;김용인;손태원;신동명;주재백;정귀영;김영관;강우형;이병호
    • 한국응용과학기술학회지
    • /
    • 제12권1호
    • /
    • pp.125-131
    • /
    • 1995
  • Ultra thin films of Tetra-3-hexadecylsulphamoylcopperphthalocyanine(HDSM-CuPc) were formed on various substrates by Langmuir-Blodgett method, where HDSM-CuPc was synthesized by attaching long-chain alkylamine(hexa-decylamine) to CuPc. The reaction product was identified with FT-IR, UV-visible absorption spectroscopies, elemental analysis and thin layer chromatography. The formation of Ultrathin Langmuir-Blodgett(LB) films of HDSM-CuPc was confirmed by FT-IR and UV-visible spectroscopies. A quartz piezoelectric crystal coated with LB films of HDSM-CuPc was examined as a gas sensor for $N0_2$ gas. HDSM-CuPc LB films were transferred to a quartz crystal microbalance(QCM) in the form of Z-type multilayers. Response characteristics of film-coated QCM to $NO_2$ gas concentrations over a range of $100{\sim}600ppm$ have been tested with a thickness of $5{\sim}20$ layers of HDSM-CuPc. Changes in frequency by adsorption of $NO_2$ were increased With the number of LB layers and $NO_2$ concentration, but the response time was slow.