• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.3
• /
• pp.212-219
• /
• 1985

The field experiment was conducted to study on the growth analysis of early variety, MTC-1, and late variety, Suweon 19, in response to seeding time at Suweon. The results summarized as follows: 1. Days required for Leaf-Formation(L-phase) of MTC-1 and Suweon 19 was same but that of Node-Thickening(N-phase) was quite different, e.g. late variety has two times longer. The period of Ear-Development (E-phase) in MTC-1 was 41 days and 53 days in Suweon 19. L-and N-phase were shortened by late seeding but E-phase was not influenced by seeding time. 2. Leaf Area Index(LAI) was decreased and Leaf Area Ratio(LAR) was increased by late seeding. Days required to maximum LAR was less by late seeding. Net Assimilation Rate(NAR) of L-, N-, and E-phase was decreased but its tendency in E-phase was remarkable at late seeding. 3. Crop Growth Rate(CGR) was increased gradually in the process of plant growth and it was the highest at Husk-stage. Relative Growth Rate(RGR) was increased in L-phase and was decreased in N- and E-phase, but its tendency in N-phase was great. 4. The period required to the maximum dry matter yield was shortened by late seeding and dry matter yield was increased by early seeding.

• Korean Journal of Plant Resources
• /
• v.32 no.1
• /
• pp.29-37
• /
• 2019

This study was conducted to provide a basic data such as leaf morphological characteristics, total 110 individual trees selected from 11 wild population, for selective breeding. As a result of investigation of the twenty morphological characteristics of the leaf, there were statistically significant differences in all leaf characteristics among the populations. Especially, Mt. Mani population had larger leaf length (LL), width (LW) and area (LAR) than other populations. On the other hand, Mt. Beakwoon and Mt. Duryun had smaller leaf size (LL, LW and LAR) among the populations. Its principal component analysis (PCA) results showed that it represented 72.9% accumulated explanation from three principal component. The characteristics such as leaf area, leaf length and leaf width were highly contributed for classification among populations. According to the cluster analysis, the natural S. alnifolia populations were classified into five groups and Mt. Mani population was different from the other population.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.1
• /
• pp.34-45
• /
• 2021

Weather is one of the important factors in the agricultural industry as it affects the price, production, and quality of crops. Upland crops are directly exposed to the natural environment because they are mainly grown in mountainous areas. Therefore, it is necessary to provide accurate weather for upland crops. This study examined the effectiveness of 12 forest soil factors to interpolate the weather in mountainous areas. The daily temperature and precipitation were collected by the Korea Meteorological Administration between January 2009 and December 2018. The Generalized Additive Model (GAM), Kriging, and Random Forest (RF) were considered to interpolate. For evaluating the interpolation performance, automatic weather stations were used as training data and automated synoptic observing systems were used as test data for cross-validation. Unfortunately, the forest soil factors were not significant to interpolate the weather in the mountainous areas. GAM with only geography aspects showed that it can interpolate well in terms of root mean squared error and mean absolute error. The significance of the factors was tested at the 5% significance level in GAM, and the climate zone code (CLZN_CD) and soil water code B (SIBFLR_LAR) were identified as relatively important factors. It has shown that CLZN_CD could help to interpolate the daily average and minimum daily temperature for upland crops.

• Journal of Food Hygiene and Safety
• /
• v.38 no.6
• /
• pp.496-507
• /
• 2023

This study investigated species identification and labeling compliance of 48 shrimp products sold in the Korean online markets. Species identification was conducted using the standard DNA barcoding method, using the cytochrome c oxidase subunit I gene. The obtained sequences were compared with those deposited in the NCBI GenBank and BOLD Systems databases. Additionally, phylogenetic analysis was performed to further verify the identified shrimp species. Consequently, 16 shrimp species were identified, including Penaeus vannamei, Pandalus borealis, Palaemon gravieri, Leptochela gracilis, Penaeus monodon, Pleoticus muelleri, Metapenaeopsis dalei, Euphausia pacifica, Lebbeus groenlandicus, Trachypenaeus curvirostris, Argis lar, Metanephrops thomsoni, Metapenaeopsis barbata, Alpheus japonicus, Penaeus chinensis, and Mierspenaeopsis hardwickii. The most prevalent species was Penaeus vannamei, found in 45.8% of the analyzed products. A significant mislabeling rate of 72.9% was found; however, upon excluding generic names such as shrimp, the mislabeling rate reduced to 10.4%. The mislabeling rate was higher in highly-processed products (89.3%) compared with that in minimally-processed products (50%). No correlation was found between the country of origin and mislabeling rate. The results of this study provide crucial data for future monitoring of shrimp products and improving the labeling of shrimp species in Korea.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.6
• /
• pp.428-434
• /
• 2004

Coarse clumping of solid materials within diseased biological cells can have a marked influence on the light scattering pattern. Perturbations in refractive index lead to distinct varia­tions in the cytometric signature, especially apparent over wide scattering angles. The large dynamic range of scattering intensities restricts collection of data to narrow angular intervals be­lieved to have the highest potential for medical diagnosis. We propose the use of an interfer­ence filter to reduce the dynamic range. Selective attenuation of scattering intensity levels is expected to allow simultaneous data collection over a wide angular interval. The calculated angu­lar transmittance of a commercial shortwave-pass filter of cut-off wavelength 580 nm indicates significant attenuation of scattering peaks below ${\~}\;10^{circ}$, and reasonable peak equalization at higher angles. For the three-dimensional calculation of laser light scattered by cells we use a spectral method code that models cells as spatially varying dielectrics, stationary in time. How­ever, we perform preliminary experimental testing with the interference filter on polystyrene microspheres instead of biological cells. A microfluidic toolkit is used for the manipulation of the microspheres. The paper intends to illustrate the principle of a light scattering detection system incorporating an interference filter for selective attenuation of scattering peaks.

• Publications of The Korean Astronomical Society
• /
• v.12 no.1
• /
• pp.35-45
• /
• 1997

SOFT($\underline{So}lar\;\underline{F}lare\;\underline{T}elescope$) installed at BOAO(Bohyunsan Optical Astronomy Observatory) is purposed for observing solar active regions using four refractors on single mount with a $400"\times300"$ field of view: Two refractors with a diameter of 15cm(f15) are observe the white light and $H\alpha$, and the other two refractors with a diameter of 20cm(f8) are observe the magnetic field distribution and Doppler shifts at the solar chromosphere. Three Lyot filters, one of the most important observational instruments, are installed on the optical rails for VMG, LMG, and $H\alpha$ that possible to very narrow pass band observation under high precision stability of temperature. From the combination of KD*P and quarter wave plate in the Lyot filter possible observe the magnetic fields strength and doppler shifts by using the characteristics of polarization components. In this paper, we introduce the basic characteristics, optical system, and monitor system of the SOFT.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.5
• /
• pp.682-691
• /
• 2013

The aerosol extinction vertical profile and surface visibility have been derived from the Microtops-II sunphotometer observation during the winter 2011 intensive observation period (IOP) at Seoul, Korea. Using models of degradation of aerosol optical thickness (AOT) and aerosol scale height, we have performed extinction-visibility modulation to determine the height dependent aerosol extinction and visibility. It is shown that the aerosol loading is relatively low during IOP (mean $AOT_{550}=0.22{\pm}0.08$, ${\AA}$ngstr$\ddot{o}$m exponent=$1.14{\pm}0.26$). Modeled extinction by use of Microtops II sunphotometer data shows good agreement with measurements by the Multi-wavelenth Polarization Lidar (MPoLAR), and the derived surface visibility are consistent with data from the transmissometer. These results emphasize the use of a vertically resolved extinction from AOT to predict visibility conditions at ground level.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2648-2653
• /
• 2003

This paper describes the development of a 3-DOF laparoscopic assistant robot system with motor-controlled bending and zooming mechanisms using the voice command motion control and auto-tracking control. The system is designed with two major criteria: safety and adaptability. To satisfy the safety criteria we designed the robot with optimized range of motion. For adaptability, the robot is designed with compact size to minimize interference with the staffs in the operating room. The required external motions were replaced by the bending mechanism within the abdomen using flexible laparoscope. The zooming of the robot is achieved through in and out motion at the port where the laparoscope is inserted. The robot is attachable to the bedside using a conventional laparoscope holder with multiple DOF joints and is compact enough for hand-carry. The voice-controlled command input and auto-tracking control is expected to enhance the overall performance of the system while reducing the control load imposed on the surgeon during a laparoscopic surgery. The proposed system is expected to have sufficient safety features and an easy-to-use interface to enhance the overall performance of current laparoscopy.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.2
• /
• pp.166-174
• /
• 1999

On-line efficiency optimization control of an induction motor drive using neural network is important from the v viewpoints of energy saving and controlling a nonlinear system whose charact81istics are not fully known. This paper p presents a neural networklongleftarrowbased on-line efficiency optimization control for an induction motor drive, which adopts an optimal slip an밍J.lar frequency control. In the proposed scheme, a neuro-controller provides minimal loss operating point i in the whole range of the measured input power. Both simulation and experimental results show that a considerable e energy saving is achieved compared with the conventional constant vlf ratio operation.

• Fisheries and Aquatic Sciences
• /
• v.2 no.2
• /
• pp.161-166
• /
• 1999

The rigor-mortis progress of cultured olive flounder spiked at the brain started much faster than that of wild one. They attained full rigor state after 30 hrs at $0^{\circ}C$, 36 hrs at $5^{\circ}C$ and 50 hrs at $10^{\circ}C$ in the cultured flounder, while after 36 hrs at $0^{\circ}C$, 50 hrs at $5^{\circ}C$, and 60 hrs at $10^{\circ}C$ in the wild. ATP concentration in the muscle was around $5.9\mu mol/g$ for wild and $6.2\mu mol/g$ for cultured flounder. ATP breakdown progressed rapidly in $0^{\circ}C$ samples, followed by $5^{\circ}C$ and $10^{\circ}C$ samples. $Mg^{2+}$-ATPase activity of myofibrillar protein in the presence of 0.25mM CaCb was higher in cultured myofibri1lar protein than in wild one. $Mg^{2+}$-ATPase activities of myofibrillar protein increased during storage in samples stored at $0^{\circ}C$ and $5^{\circ}C$ while decreased in samples stored at $10^{\circ}C$. The level of breaking strength of muscle immediately after death was higher in the wild muscle than in the cultured muscle. The breaking strength reached maximum level at 10 hrs after death in both samples.