• The Journal of Korea Robotics Society
• /
• v.6 no.2
• /
• pp.182-188
• /
• 2011

This paper describes a method of road tracking by using a vision and laser with extracting road boundary (road lane and curb) for navigation of intelligent transport robot in structured road environments. Road boundary information plays a major role in developing such intelligent robot. For global navigation, we use a global positioning system achieved by means of a global planner and local navigation accomplished with recognizing road lane and curb which is road boundary on the road and estimating the location of lane and curb from the current robot with EKF(Extended Kalman Filter) algorithm in the road assumed that it has prior information. The complete system has been tested on the electronic vehicles which is equipped with cameras, lasers, GPS. Experimental results are presented to demonstrate the effectiveness of the combined laser and vision system by our approach for detecting the curb of road and lane boundary detection.

• Journal of Korean Society of Transportation
• /
• v.11 no.3
• /
• pp.67-82
• /
• 1993

The effects of passing lanes on traffic flow on rural two-lane highways have been investigated in this research. Field study results were compared with the computer simulation model, TRARR, TRARR model appears to be in good agreement with field study results except that average speed and distribution of platoon sizes showed a small amount of discrepancy, which is believed to be caused by too large a headway definition of 6 second for a vehicle platoon. Using the TRARR model, 4 situations including the existing condition, installation of passing lanes, improvement of design speed, and expansion to a four lane highway were evaluated. Traffic volume levels of 500,1000, and 1500 vph and truck composition of 20 and 40% were also considered making a total of 24 computer runs. It is concluded in this research that the installation of passing lanes is the most effective method to improve traffic operation on two-lane high ways except the alternative of four lane highway expansion.

• International Journal of Highway Engineering
• /
• v.17 no.3
• /
• pp.133-141
• /
• 2015

PURPOSES : This study dealt with traffic accidents occurring within roundabouts. The objective of this study was to analyze safety effect by introduction of roundabouts. METHODS : In pursuing the above, traffic accident data on roundabouts are collected and compared. For the analysis, collected data were separated as all intersection points, turning lane accident, approach lane accident by geometric design. RESULTS : Through the study results, it was found that the total accidents decreased by 55 accidents/2 year with safety effect of roundabouts. Also the result shows that accidents by point of two-lane roundabout at turning lane(0.26) and approach lane(0.27) is risky than total accidents by point(0.09). Moreover, accidents by point shows high value as diameter of a roundabout is bigger. CONCLUSIONS : When a roundabout is introduced at the intersections there are safety effects by reduction of traffic accidents.

• International Journal of Highway Engineering
• /
• v.19 no.6
• /
• pp.183-190
• /
• 2017

PURPOSES : The objective of this study is to establish the traffic volume-based warrants of right-turn lanes at unsignalized intersections and to introduce a risk probability methodology based on the warrants. METHODS : In this study, a risk probability of a potential rear-end collision is applied between a right-turn vehicle and the immediately following through vehicle. Using the shifted negative exponential model and the compound probability theorem, the risk probability can be expressed as the function of directional volumes and the percentage of right-turns for a two-lane and four-lane highway, respectively. RESULTS : Based on the risk probablity, guidelines for installing right-turn lanes on two-lane and four-lane highways were developed. The risk probability also showed rationality by comparing with right-turn same-direction conflicts observed in-situ. CONCLUSIONS : The results of our study define the total approaching volumes to encourage a right-turn lane as a function of operating speed, percentage of right-turn, and number of lanes.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.465-467
• /
• 1998

A lane change maneuver is a part of lateral control of an automated highway system. Assuming no direct measurement of its position during transition from one lane to another. A vehicle is controlled to follow the virtual desired trajectory using only on-board sensors. This paper investigates the development of a fuzzy controller for automated lateral control during emergencies. The performance of the fuzzy controller is presented at 20m/s for a step lane change and a double lane change. The robustness of fuzzy controller is investigated with respect to change in tire parameters and the number of passengers.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.226-231
• /
• 1998

This paper describes how a priori road geometry and its estimation may be used to detect road boundaries and lane markings in road scene images. We assume flat road and road boundaries and lane markings are all Bertrand curves which have common principal normal vectors. An active contour is used for the detection of road boundary, and we reconstruct its geometric property and make use of it to detect lane markings. Our approach to detect road boundary is based on minimizing energy function including edge related term and geometric constraint term. Lane position is estimated by pixel intensity statistics along the parallel curve shifted properly from boundary of the road. We will show the validity of our algorithm by processing real road images.

• Journal of Navigation and Port Research
• /
• v.36 no.7
• /
• pp.591-597
• /
• 2012

Generally an urban freeway means a primary arterial which provides road users with a free-flow speed, except for ramp junctions during rush hours. However, most road users suffer from traffic congestion in the basic segments as well as in the ramp junctions of urban freeway during rush hours, because most road users prefer urban freeways to local roads in the urban areas. This study then intends to analyze lane traffic characteristics of urban freeway basic segments having more freight vehicles during rush hours, find the lane showing a high correlation with the segment speed between lane speeds, and finally suggest a segment-speed predictive model by the lane speed of urban freeway basic segments during rush hours.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.1411-1412
• /
• 2015

Detection of road lanes is an important technology, which is being used in autonomous vehicles from last few years. This method is very helpful and supportive for the drivers to provide them safety and to avoid road accidents. Alot of methods are being used to detect road lane markings. We can categorize them into three major categories: sensor-based, feature-based, and model-based methods. And in this study we give the comprehensive survey on lane marking techniques.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.252-253
• /
• 2023

Container terminal automation might offer many potential benefits, such as increased productivity, reduced cost, and improved safety. Autonomous trucks can lead to more efficient container transport. A robust lane detection method is proposed using score-based generative modeling through stochastic differential equations for image-to-image translation. Image processing techniques are combined with Density-Based Spatial Clustering of Applications with Noise (DBSCAN) and Genetic Algorithm (GA) to ensure lane positioning robustness. The proposed method is validated by a dataset collected from the port terminals under different environmental conditions and tested the robustness of the lane detection method with stochastic noise.

• Journal of the Korean Society of Safety
• /
• v.32 no.1
• /
• pp.128-133
• /
• 2017

This study deals with the roundabout traffic accidents by traffic impeding factor. The purpose of this study is to comparatively analyze the characteristics of accidents and to develop the accident models. In pursuing the above, this study used a statistical program SPSS 20.0 to analyze 2,342 accidents occurred within 79 roundabouts in Korea. The main results are as follows. First, 4 accident models which were all statistically significant were developed. Second, the traffic volume and width of right-turn-only lane were analyzed to be common variable in the bus stop related models. The variables such as right-turn-only lane, street light, turning radius of entry lane were selected as specific variables. Especially street light and turning radius of entry lane were evaluated to have negative effects to the accidents. It is, therefore, essential to install the street light and place a sufficient turning radius in order to reduce the roundabout accidents. Finally, the traffic volume and number of entry lane were analyzed to be common variable in the on-street parking related models. Also, the width of right-turn-only lane and bus stop were evaluate to be specific variables in the model with on-street parking. This can be expected to give some implications to making the accident reduction guidelines.